• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.20-28
• /
• 1992

The x-ray fluorescence(XRF) is one of the most convenient and widely used techniques for analyzing trace elements in ambient particulate matters. The objects of the study were to estimate the optimum exposure time using the XRF, to investigate the distributions of heavy metal levels in particulate matters, and finally to study seasonal variation for the concentrations of total suspended particulate matters(TSP) and size fractionated particulate matters. The suspended particulate matters had been collected by a cascade impactor having 9 size fragnated stages for 3 years(Dec. 1988 to Nov. 1991) in Kyung Hee University-Suwon Campus. The particulate matters were then collected on each stage by membrane filters. The weight concentrations were determined by the XRF system. Thus, seasonal variations and relationship between concentration and particle size could be investigated. Resulting distribution was bimodal with the coarse and the fine particle groups minimum occurring around 2.1 to 3.3 $\mu$m as an aerodynamic diameter. To determine optimum exposure time of the XRF for various trace inorganic elements, membrane filters and the NIST standard filters were extensively studied. Using a statistical technique, optimum exposure time was estimated for each trace element and overall elements. The time was then determined as 20 seconds for the XRF system. The concentration of TSP was 123.9$\mum/m^3$ on an arithmatic average. The levels of each inorganic metal were Si 2420.0ng/$m^3$, Fe 977.1ng/$m^3$, and so on. The Pb. Zn, and Cu abounded in the fine mode group, while Ca, Fe, Si, Al, and K in the coarse group. Marked seasonal variation of TSP and metal concentrations was observed. The concentration of heavy metals in the fine mode was highest in winter : on the other hand, that in the coarse mode was highest in spring.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.79-82
• /
• 2003

GaN nanoparticles were synthesized by the pulsed laser deposition (PLD) process on $SiO_2$substrate after irradiating the surface of the GaN sintered pellet by the ArF (193 nm) excimer laser. At this moment Ar gas pressure of 100 Pa, 50 Pa, 10 Pa and 1 Pa were applied during the ablation process and laser power of 100 mJ and 200 mJ were also applied. The synthesized fan nanoparticles were characterized by XRD, SEM, TEM, XPS and optical absorption spectra. The synthesized GaN nanoparticles had the crystallite sizes of 20~30 nm, and besides, GaN nanoparticles synthesized under low Ar gas pressure compared to the others corresponded with stoichiometry, and the optical band edge of the GaN nanoparticles was blueshifted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.65-71
• /
• 2004

We improved the MLLR speaker adaptation algorithm with reduction of the order of HMM parameters using PCA(Principle Component Analysis) or ICA(Independent Component Analysis). To find a smaller set of variables with less redundancy, we adapt PCA(principal component analysis) and ICA(independent component analysis) that would give as good a representation as possible, minimize the correlations between data elements, and remove the axis with less covariance or higher-order statistical independencies. Ordinary MLLR algorithm needs more than 30 seconds adaptation data to represent higher word recognition rate of SD(Speaker Dependent) models than of SI(Speaker Independent) models, whereas proposed algorithm needs just more than 10 seconds adaptation data. 10 components for ICA and PCA represent similar performance with 36 components for ordinary MLLR framework. So, compared with ordinary MLLR algorithm, the amount of total computation requested in speaker adaptation is reduced by about 1/167 in proposed MLLR algorithm.

• Korea Journal of Hospital Management
• /
• v.16 no.3
• /
• pp.1-18
• /
• 2011

In this study, population census(2005 & 2008) from Statistics Korea and the statistical data of the number of hospital beds by healthcare facilities classification from Ministry of Health and Welfare were used. For analyzing distribution of hospital beds, hospital beds were classified as acute care beds, long-term care beds and all hospital beds, which is including acute and long-term care beds. Regional areas, which are city(si), county(goon) for the study and district(gu) were reclassified as metropolitan city, city(si) and county(goon). Because there were 165 regional areas in 2005 and 2008, 84 and 81 areas were classified as metropolitan city and/or city and county, respectively. Gini index were calculated for hospital beds from each year, and Lorenz curves were drawn. The following summary presents the findings of this study. Compared to the year 2005 and 2008, the Gini index was 0.24472, and hospital bed numbers increased slightly by 0.80% than in 2005. In case of acute care beds, the Gini index was 0.23797(0.13%), and there was no big difference; however, the Gini index for long-term care beds was 0.41091, and there was a 30.25% decrease, which shows improvement to reduce disparities. It might result from an increase in long-term care beds up to 476.2%. For geographical equality of hospital beds, the Gini index and Lorenz curve, which can be compared the degree of inequality in the distribution of hospital beds reasonably and possibly show statistical data, should be used. Through this study, the distribution policy of hospital beds should be established.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1921-1923
• /
• 2001

In this work, an array of resistance temperature detector(RTD) was fabricated inside the microchannel in order to investigate in-situ flow characteristics. A rectangular straight microchannel, integrated with RTD's for temperature sensing and a heat source for generating the temperature gradient along the channel. were fabricated with the dimension of $200{\mu}m(W){\times}{\mu}m(D){\times}$48mm(L), while RTD measured precise temperatures at the inside-channel wall. 4" $525{\pm}25{\mu}m$ thick P-type <100> Si wafer was used as a substrate. For the fabrication of RTDs. 5300$\AA$ thick Pt/Ti layer was sputtered on a Pyrex glass wafer. Finally, glass wafer was bonded with Si wafer by anodic bonding, therefore RTD was located inside the microchannel. The temperature distribution inside the fabricated microchannel was obtained from 4 point probe measurements and Dl water is used as a working fluid. Temperature distribution inside the microchannel was measured as a function of mass flow rate and heat flux. As a result, precise temperatures inside the microchannel could be obtained. In conclusion, this novel temperature distribution measurement system will be very useful to the accurate analysis of the flow characteristics in the microchannel.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.295-304
• /
• 2012

Ilmenite mine was developed in the anorthosites which intruded Precambrian Jirisan gneiss complex in Wolheongri, Okjong-myeon, Hadong. Ti-ore bodies are confined to the intercumulated type anorthosites, where REE-bearing allanite occurred as veins. The chemistry of allanites shows relatively low in CaO (11.02~12.81 wt%), but high in ${\Sigma}R_2O_3$ (R = Ce, La, Nd) (17.21~21.58 wt%), respectively. Abnormally high radioactive detection ascribes to the presence of small particles of thorium mineral known as thorite ($ThSiO_4$). Thorite shows 65~72.78 wt% ($ThO_2$) and 5.49~12.78 wt% ($UO_2$) in composition. The radioactive prospecting could be a strong tool to find REE-bearing allanite which is closely associated with Ti-ore deposits.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.251-257
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning, high temperature process which consumes vast chemicals and ultra Pure water(UPW). This technology gives rise to the many environmental issues, therefore some alternatives have been studied. In this study, intentionally contaminated Si wafers were cleaned using the electrolyzed water(EW). The EW was generated by an electrolysis equipment which was composed of anode. cathode, and toddle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case $NH_4$Cl electrolyte, the oxidation-reduction potential(ORP) and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.7, and -750mV and 9.8, respectively. For cleaning metallic impurities, AW was confirmed to be more effective than that of CW, and the particle distribution after various particle removal processes was shown to be same distribution.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2002

This study was performed to investigate removal efficiency of wastewater by the prepared coagulant using waste oyster shell and loess. Waste oyster shell and loess contain respectively high CaO(55.43% by weight), $SiO_2$(45.30% by weight). Waste oyster shell was calcined to improve the purity of CaO at the calcination condition of $900^{\circ}C$ for 2hours, and then crushed 0.074 mm(200mesh) size by ball mill. Also, coagulant was prepared with calcined waste oyster shell and loess powder by hydration reaction. Calcined waste oyster shell and loess powder were combined with mixing ratio of 6 : 4, 7:3, 8:2 and 9:1. Though comparison experiment between prepared coagulant and chemical )$Ca(OH_2$, prepared coagulant was proved as having replaceable possibility of chemical )$Ca(OH_2$in wastewater treatment plant.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.109-113
• /
• 2004

Zn diffusions in InP have been studied by electrochemical capacitance voltage. The InP layer was grown by metal organic chemical vapor deposition, and $Zn_3P_2$ thin film was deposited on the epitaxial substrates. The samples annealed in a rapid thermal annealing. It is demonstrated that surface hole concentration as high as $1\times10^{19}\textrm{cm}^{-3}$ can be achieved. When the Zn diffusion was carried at $550^{\circ}C$ and 5-20 min., the diffusion depth of hole concentration moves from 1.51$\mu\textrm{m}$ to 3.23 $\mu\textrm{m}$, and the diffusion coeffcient of Zn is $5.4\times10^{-11}\textrm{cm}^2$/sec. After activation, the concentration is two orders higher than that of untreated sample at 0.30 $\mu\textrm{m}$ depth. As the annealing time is increase, the hole concentration remains almost constant, except deep depth. It means that excess Zn interstitials exist in the doped region is rapidly diffusion into the undoped region and convert into substitutional When the thickness of $SiO_2$ thin film is above 1,000$\AA$, the hole concentration becomes stable distribution.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.615-624
• /
• 2004

The distribution pattern of water quality parameters and phytoplankton biomass in upper inflow rivers of lake Paldang had surveyed. In North-Han river system, nutrient concentrations and algal biomass was below the standard of mesoand oligotrophy from lake Soyang to lake Paldang, maintaining good water quality, except the N5 site located near the Chuncheon-Si, showing high nutrients concentrations and algal biomass. The algal biomass of the South-Han river system showed oligotrophic level in the upstream near the lake Chungju, and increased along the flow direction showing eutrophic level in the downstream within the lake Paldang area. On the other hand, the highest concentrations of nutrients were detected in the middle stream near the Yeoju-Si and Yangpyung-Gun rather than in the downstream suggesting algal biomass in lake Paldang would not come from the upper river area but come from the growth within the lake area using nutrients from the upper inflow river.