• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.1
• /
• pp.5-11
• /
• 1978

Si-ZnSe n-n heterojunction was made by growing ZnSe thin film on the Si single crystal (111) surface with Bash evaporating method in vacuum. This heterojunction was found to be a useful device for frequency meter in the visible wave-length from the measuring of the photovoltaic effect of the heterojunction.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.166-170
• /
• 1993

In the initial stages of oxidation of Si(111)-7${\times}$7 held at 40K through exposing molecular oxygen, it has been detected average work-function measured by ultraviolet photoelectron spectroscopy (UPS) is about 0.4eV higher than the local work-function of the modified area measured by photoemission for adsorbed Xenon (PAX). This result indicates that the increment of work-function at the initial oxidation stages of Si(111)-7${\times}$7 is mainly due to the moleculary adsorbed oxygen. From the shift of broadened Xe 5p and Xe 3d, it has also been estimated that the work-function of the modified area is 0.6eV higher than that of the clean area.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2006

By analyzing the Ge 34 core-level photoelectron spectrum, we studied the structure of the $Li/Ge(111)-3\times1$ surface. Two surface related components tying on either side of the main bulk peak were identified in the Ge 3d spectrum. The existence and the position of the two surface components in the core-level spectrum from $Li/Ge(111)-3\times1$ is similar to those of the $Li/Ge(111)-3\times1$, suggesting the similarities in structure of the two surfaces. The core-level photoelectron spectra of the Li-induced $Li/Ge(111)-3\times1$ surface are well consistent with the honeycomb-chain-channel model, which was proposed as the structure of the $Si/Ge(111)-3\times1$ induced by alkali metals.

• Applied Microscopy
• /
• v.24 no.4
• /
• pp.123-131
• /
• 1994

In this study the initial stage nucleation and growth of Ni silicide on (001) Si by evaporation and furnace annealing have been investigated by transmission electron microscopy. The pressure was $10^{-6}$ Torr during evaporation and annealing. And the annealing temperature to produce $NiSi_2\;was\;800^{\circ}C$. From the evaporated film, $NiSi_2$ nucleus has grown into Si substrate with an epitaxial orientation relationship. Interfaces between $NiSi_2$ and Si were A-type {111} interfaces and {100} $NiSi_2$ interfaces were also observed at the initial stage of nucleation. Ni silicide grew into Si substrate, but the nucleus partly grew into the evaporated film, with no facets, from the nuclei in the Si substrate. $NiSi_2$ nucleus with (111) habit planes was also observed.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.647-651
• /
• 2016

SiC films were prepared on glassy carbon substrates by laser chemical vapor deposition under a high pressure of $10^4Pa$ using a diode laser (wavelength = 808 nm) and a polysilaethylene precursor. (111)-oriented SiC films were formed at a deposition temperature ($T_{dep}$) range of 1150 - 1422 K. At $T_{dep}=1262K$, the SiC film with a high Lotgering factor of above 0.96 showed an exhibited pyramid-like surface morphology and flower-like grains. The highest deposition rate ($R_{dep}$) was $220{\mu}m\;h^{-1}$ at $T_{dep}=1262K$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.187-188
• /
• 2005

The characteristics of GaN epitaxial layers grown on silicon (111) substrates by metalorganic vapor phase epitaxy have been investigated. The only control of AlN thickness was found to decrease the stress sufficiently for avoiding crack formation in an overgrown thick ($2.6{\mu}m$) GaN layer. X-ray diffraction and photoluminescence measurements are used to determine the effect of AlN thickness on the strain in the subsequent GaN layers. Strong band edge photoluminescence of GaN on Si(111) was observed with a full width at half maximum of the bound exciton line as low as 17meV at 13K.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.201-206
• /
• 2005

In this work, we tried to improve the fabrication process in HVPE (Hydride Vapor Phase Epitaxy) system by using Si(111) substrate with pre-deposited Al layer. PL measurements was done for samples with and without pre-deposited Al on Si and it was also examined the dependence of the optical characteristic properties on AlN buffer thickness for GaN/AIN/Al/Si. A sample with thin Al nucleation layer on Si substrate reveals a better optical property than the other. And it suggests that the thickness for AlN buffer layer with thin Al nucleation layer on Si(111) substrate is most proper about $260{\AA}$ to grow GaN in HVPE system. The surface morphology of GaN clearly shows the hexagonal crystallization. The XRD pattern showed strong peak at GaN{0001} direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.233-233
• /
• 2012

위상절연체(Bi2Te3)와의 격자상수 불일치 비율이 서로 다른 Si (111)와 Ge (111) 기판을 선택하여 Bi3Te3 박막의 성장 조건을 찾고 이에 따른 특성 분석을 수행하였다. 시료 제작은 초고진공 분위기에서 MBE를 이용하였고, AFM, XRD와 XPS로 각각 구조적 변화, 결정 상태 및 화학적 상태를 분석하였다. 우선 Si 위에 형성된 Bi2Te3의 경우, 초기 박막이 형성된 후, 증착 시간이 증가함에 따라 섬(island)모양의 구조물들이 step edge 부분에 분포되는 모습을 AFM 이미지에서 확인하였다. 형성된 박막의 스텝 단차는 약 1 nm 또는 이 값의 정수 배였고, 이것은 Bi2Te3 unit cell의 quintuple layer (QL) 값과 일치하였다. 또한 측정된 XRD pattern으로 Bi2Te3가 hexagonal 구조의 c-축에 따라 결정성이 이루어졌음을 확인할 수 있었다. XPS 스펙트럼에서는 Bi 4f가 높은 에너지 방향으로 2.3 eV, Te 3d는 낮은 에너지 방향으로 약 0.7 eV 만큼 구속 에너지의 화학적 이동이 나타남을 알 수 있었다. 이러한 결과는 Si 위에 Bi2Te3 박막이 높은 결정성을 가지고 형성되었다는 것을 의미한다. 또한 Si (111) 기판보다 Bi2Te3 결정과 격자상수 불일치의 비율이 상대적으로 작은 Ge (111)을 기판으로 하여 Bi2Te3 박막을 성장시켜 두 표면에서의 박막 성장의 특성을 비교, 논의할 것이다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.322-326
• /
• 1999

We have investigated the growing process of a silicon film on the $CeO_2/Si$ surface. The silicon was deposited by using electron beam deposition method. The $CeO_2$(111) film was grown on a (111)-oriented silicon substrate at $700^{\circ}C$ at oxygen [partial pressure of $5\times10^{-5}$ Torr. To investigate the condition of epitaxial growth of si films on the $CeO_2/Si$ substrate, we deposited Si at various temperature니 The overlayer silicon was characterized by using x-ray diffraction(XRD). double crystal x-ray diffraction (DCXRD), and transmission electron microscopy (TEM). At temperature higher than $690^{\circ}C$, $CeO_2$ layer was observed at the $CeO_2/Si$ interface, which was formed by chemical reaction with silicon and oxygen dissociated from $CeO_2$. When silicon was deposited on the $CeO_2/Si$ at $620^{\circ}C$, silicon grew epitaxially along the (111)-direction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.828-833
• /
• 2000

Growth characteristics and microstructure of AIN thin films grown by plasma assisted molecular beam epitaxy on Si substrates have been investigated. Growing temperature and substrate orientation were chosen as major variables of the experiment. Reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the micorstructure of the films. On Si(100) substrates, AlN thin films were grown along the hexagonal c-axis preferred orientation at temperature range 850-90$0^{\circ}C$. However on Si(111), the AlN films were epitaxially grown with directional coherency in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112) at 85$0^{\circ}C$ and the epitaxial coherencry seemed to be slightly distorted with increasing temperature. The microstructure of AlN thin films on Si(111) substrates showed that the films include a lot of crystal defects and there exist micro-gaps among the columns.