• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.103-103
• /
• 2005

• Advances in environmental research
• /
• v.6 no.4
• /
• pp.255-264
• /
• 2017

This work investigated the use of sugarcane bagasse ash (SCBA) generated by an energy cogeneration process in sugarcane mill as an alternative raw material in soil-cement brick. The SCBA obtained from a sugarcane mill located in southeastern Brazil was characterized with respect to its chemical composition, organic matter content, X-ray diffraction, plasticity, and pozzolonic activity. Soil-cement bricks were prepared by pressing and curing. Later, they were tested to determine technical properties (e.g., volumetric shrinkage, apparent density, water absorption, and compressive strength), present crystalline phases, and microstructural evolution. It was found that the SCBA contains appreciable amounts of silica ($SiO_2$) and organic matter. The results showed that the SCBA could be used in soil-cement bricks, in the range up to 30 wt.%, as a partial replacement for Portland cement. These results suggest that the SCBA could be valorized for manufacturing low-cost soil-cement bricks.

• Journal of the Korean Ceramic Society
• /
• v.24 no.6
• /
• pp.553-560
• /
• 1987

Amorphous ferrites with composition B2O3-mBaO-nFe2O3 were prepared by an ultra rapidquenching technique. X-ray patterns and SEM reveal the products to be amrophous at room temperature. BaFe12O19 fine particles extracted from amorphous Ba-ferrites which additived Al2O3, SiO2, TiO2 and CoO have narrow size distribution, average 0.2$\mu\textrm{m}$, and coercive force, average 1400 Oe, increased with increasing TiO2 amounts. The obtained BeFe12O19 fine particles would be appreciated as perpendicular magnetic recording media.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.253-258
• /
• 1984

This paper deals with the reaction-bonded silicon nitride I terms of its microstructural development during nitrida-tion. Silicon powder compacts were reacted with nitrogen at 1185$^{\circ}C$ and 13$65^{\circ}C$ according to the nitriding schedule. Microstructures of nitrided specimens were examined by means of optical and scanning electron microscope to discuss the nitridation or microstructural development at initial and intermediat stage of nitridation. Reaction products were also analysed by X-ray diffraction method at each stage of nitridation. The results indicate that ho-mogeneous and uniform microstructure with find porosity can be obtained only under the reaction condition. such as slow and relatively constant reaction rate with time.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.103-108
• /
• 2000

Since the ceramic/metal joint material is made at a high temperature, the residual stress development when it is cooled from bonding temperature to room temperature due to remarkable difference of thermal expansion coefficient between ceramic and metal. As residual stress at ceramic/metal joints influences the strength of joints, it is important to estimate residual stress quantitatively. In this study, it is attempted to estimate joint residual stress of $Si_3N_4/STS304$ joints quantitatively and to compare the strength of Joints. The difference of residual stress is measured when repeated thermal cycle is loaded under the conditions of the practical use of the ceramic/metal joint. And 4-point bending test is performed to examine the influence of residual stress on fracture strength. As a residual it is known that the stress of joint decreases as the number of thermal cycle increases.

• Journal of Sensor Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 2009

In this paper, we present the carbon nanotube field-effect transistor(CNT-FET) with a double-gate structure. A Carbon nanotube film was aligned by the Langmuir-Blodgett technique and $SiN_x$ was deposited to protect from water, oxygen, and other contaminants. We measured the electrical characteristics of the proposed device as the function of the $V_{BG}$, $V_{TG}$. From this result, we can confirm that proposed device might be employed as a biosensor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.170-170
• /
• 2004

박막의 접착강도를 측정하기 위하여 수직력과 수평력을 동시에 측정할 수 있는 0.1∼100 N 용량의 2축 로드셀에 기반을 둔 스크레치 테스터를 개발하였다. 반도체용 Si wafer 기판 위에 Au나 Al 등의 금속이 관은 박막으로 증착된 제품을 table에 고정시킨 후, 2축 로드셀(x, z)이 장착된 하중센서의 선단에 Diamond Tip을 장착하여 기판과 박막에 하중(z-axis)을 증가시키면서 동시에 wafer를 x축 방향으로 이동시킨다. 이런 방식으로 시료의 표면을 긁으면 박막이 벗겨져 나가 Diamond Tip이 기판에 닿을 때 서로 다른 경도차에 의해 진동이 발생하게 되고, 이 진동을 Acoustic Emission 센서에서 감지하여 Crack 발생 시점의 Load와 Stroke를 찾아내게 된다.(중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.331-331
• /
• 2008

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.110.2-110.2
• /
• 2011

Nishikida et al. (2006) presented the first far-ultraviolet (FUV) em${\lambda}$ission-line images of the Vela supernova remnant (SNR) obtained with FIMS/SPEAR instrument. Those include C III ${\lambda}$977, O VI ${\lambda}{\lambda}$1032, 1038, Si IV+O IV] ${\lambda}{\lambda}$1393, 1403 (un-resolved), C IV ${\lambda}{\lambda}$1548, 1551 emission-line images. As a following work, we re-constructed these emission-line images using the new-version processed FIMS/SPEAR data. Additionally, we made N IV] ${\lambda}$1486, He II ${\lambda}$1640.5, O III] ${\lambda}{\lambda}$1661, 1666 emission-line images. The new-version images cover the whole region of the Vela SNR and show more resolved features than the old-version. We compare these FUV emission-line images with other wavelength (X-ray, optical, etc.) images obtained in previous studies.

• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.459-464
• /
• 1999

A carbon-containing silica glass was prepared from orgaincally modified silicate(Ormosil) by heat treatment in N2 atmosphere after the ormosil was synthesized using sol-gel method. The Ormosil was fabricated from the TEOS as the inorganic component and the PDMS as the organic component. The Ormosil changed to balck-coloured glass by carbon decomposed from the PDMS when the Ormosil was heated to 450$^{\circ}C$ 20hrs. A dense silicon oxycarbide glass with 2.08 g/cm3 was obtained by heating the Ormosil at 1050$^{\circ}C$ 10hrs. The microstructure of the carbon-containing silica glass was observed by SEM and the SiOxC4-x structure was confirmed by XPS measurement. The densification of the glass was studied by measurements of specific surface area linear shrinkage and geometric density.