• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2010

Purpose: We introduce arthroscopically assisted mini-open rotator cuff repair using anterolateral approach. Operative Technique: Placing lateral decubitus position on general anesthesia, a standard arthroscopic glenohumeral examination is performed to evaluate lesions of shoulder joint through posterior and anterior portal. And then arthroscope is placed in the subacromial space and we evaluate the size of the torn tendon and perform arthroscopic acromioplasty through lateral portal. A 3 to 4 cm skin incision is performed from anterolateral edge of acromion to distal and dissected along to raphe between anterior and middle deltoid. A deltoid retractor is then placed, allowing direct visualization of the rotator cuff and humeral head. As torn tendon is tagged by traction suture, we try to anatomical reduction on the footprint and then perform single row or double row repair of the rotator cuff using suture anchors. To prevent avulsion of the deltoid from the acromion, additional sutures by bone tunnel with acromion and deltoid is performed. Conclusion: This technique is useful procedure to get direct approach to anterior portion of supraspinatus tendon and to need lesser deltoid retraction than portal extension approach due to dividing along to raphe between anterior and middle deltoid. Also it provide better visualization of the superior portion of subscapularis and infraspinatus.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2006

This study was attempted to Kinematical characteristics of the Endo $360^{\circ}$El-grip Swing on the horizontal bar. To do this, we selected and analyzed the performance of two athletes who did Endo $360^{\circ}$El-grip Swing in the horizontal bar competition of male artistic gymnastic in the 22nd Universiad Games 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using two video cameras. In point of analyzing the actual competition situation, it is expected that gymnastics and coaches have the effective informations, and the following conclusion had resulted. 1. When performing Endo $360^{\circ}$El-Grip, the average for entire required time was $1.93{\pm}0.06sec$. The average for descent phase time was $0.24{\pm}0.02sec$, ascent phase time was 0.22${\pm}0.07sec$, connecting phase time was $0.87{\pm}0.07sec$, and El-Grip phase time was $0.61{\pm}0.02sec$. The descent phase need short period of time but however to have a stable performance, ensuring ascent and connecting phase time are needed. El-Grip phase need short period of time to have a stable re-grasp. 2. To have a convenient preparation for El-Grip in descent and ascent phase, lowering CM, and ease up in sway and plunge from the High Bar would make descent and ascent even more faster and would have increase effect in trunk rotation. 3. In descent and ascent phase, if shoulder angle and arm slope is dwindling then it would effect rotation angle so might risk it from hitting a Bar when putting legs in and out. 4. In connecting phase, it requires some time to show stable performance when El-Grip phase is continued by using hip angle which would make trunk rotation angle bigger and make descent and ascent time slower. 5. In El-Grip phase, when doing motions like hand standing. using hip angle more than maximum would make CM even faster and it is stable position while performing.

• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.99-112
• /
• 2008

The increasing rate of obesity in school aged children has become a conspicuous social phenomenon in Korea. This has been linked to greater economic growth, increasingly westernized dietary habits, and a consumer driven society. Given that obesity can lead to social exclusion or unfavorable attention by other students in a school setting, the design of plus-size garments have become important for effective appearance management skills. This research aimed to establish a somatotype database for obese school boys, aged 10 to 12, in order to develop a sizing system for plus-size upper garments. In order to measure somatotype of average and obese school boys, five categories were recorded; height, obesity, length of trunk, thickness of neck and chest. For obese boys, subcutaneous fat thickness and position of B.P/shoulder point factors were recorded. Obesity factor was subdivided into overall and specific ones, and while the deviation of obese body types was severe compared to the average type. Obese body type showed significantly higher measurements in width, girth, thickness. This is linked to the fact that the frequency ratio of obesity increases with age. Stature and chest were chosen as control dimensions for boys' wear. As crosstabulation of stature(5cm interval) and chest girth(2, 3 and 4cm), and stature(5cm interval)/chest girth(3cm interval) sizing system showed, the most effective cover ratio and adaptability to the data distribution $25{\sim}75$ quartile. Based on the findings, 10 sizes were formulated for average body type, while 18 sizes were formulated for obese type, whose size cover ratios were 48% and 62.9%, respectively. The primary ranges of stature were $145cm{\sim}150cm$, while those of chest girth were $79{\sim}82cm$. Each size was declared as "chest-somatotype{A(average)/O(obesity)-stature". This study proposed a plus-size upper garment sizing systems for obese boys, accompanied with reference measurements for suit, casual wear and underwear. The finding showed that the two systems were totally separate and not overlapping, meaning that plus-size sizing system is essential for obese school boys. The obesity type system had more size and wider range specs.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.263-269
• /
• 2017

Pulmonary function test (PFT) is a test method to determine respiratory disease. In order to obtain accurate PFT results, it is absolutely necessary to induce the inspector and cooperate with the patient. This study was to observe the importance of understanding and posture of the patient in spirometry. In 2016, 110 healthy experimenter performed spirometry; 1) only heard the explanation, 2) watching video and inspector,s demonstration, 3) twisting legs and bending shoulder. FVC, $FEV_1$, $FEV_1/FVC$, $FEF_{25-75%}$, PEF were measured by spirometry. FVC, $FEV_1$, $FEV_1/FVC$, $FEF_{25-75%}$, PEF were significantly increased before and after the understanding the test method. There was a significant difference in FVC, $FEV_1$, and PEF in the false posture. Reproducibility was significantly different in the experimenter' comprehension and false posture. This study provides accurate understanding of the patient and correct posture should be maintained during the examination to obtain correct and reproducible results of PFT.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.37-47
• /
• 2009

This study develops a technique training program to enhance the completion of Kolman, the high air flight technique, and applies it to two national athletes of the horizontal bar, one of the gymnastic events, for eight weeks. After that, their improvement was measured through 3D motion analysis to help them elevate their performance. The training program includes swing, hand release, twist, and bar hold, and its implementation produced the results stated below. They were made to practice the motion in the following way. After the hand-standing of giant swing which initiates the motion, they lift their body upward a little bit more. Next, they take their body down almost like a vertical descent and make a deep tap swing. Instead of doing the tap swing which widens the flection of hip and shoulder joints, while body revolution is more emphasized in particular, they release the bar as raising the centroid of their body sufficiently. During the flight, they try to narrow every joint in their body. As a result, the bar's elasticity becomes greatly increased, and since the backing rate of their body gets higher, the centripetal force of the swing is improved that they can release the bar in the higher position. In addition, because they can erect their body faster during the flight, they can perform comfortable twist and revolution in the air. They can also adjust the direction of the flight easily without too much concern for the proper timing of hand release as they rise. Thereby, they can not only maintain adequate distance from the bar for the bar hold but also ensure enough distance for body revolution and twist.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.83-89
• /
• 2017

Objective: Computers and smartphones have become a necessity for modern people, and the use of these things in an inappropriate position has increased the number of people who complain about neck problems. The purpose of this study was to compare the changes of cervical angle, range of motion (ROM) and pain threshold according to the McKenzie stretching and dry cupping therapy. Design: Cross-over design. Methods: We included 12 male and 6 female college students in their twenties, and conducted a pre- and post-test to evaluate the changes of each variable after the application of the McKenzie stretching and dry cupping therapy. Results: Neither the cervical spine angle nor the turtle neck angle showed any change in both the McKenzie stretching and the dry cupping treatment. In the McKenzie stretching, the pain threshold decreased, and the ROM of the cervical spine increased in all directions but there was no significant difference. The pain threshold was increased in the dry cupping treatment, and the ROM of the cervical spine was significantly increased in all directions (p<0.05). Comparisons of the McKenzie stretching and cupping treatment showed that the cupping treatment produced significantly greater pain thresholds and improvements in ROM of the cervical spine than the McKenzie stretching technique (p<0.05). Conclusions: Cupping treatment is more effective in improving ROM of the cervical spine and pain thresholds than the McKenzie stretching technique. In the future, cupping treatment will be one of the treatment options for pain and ROM impairments of the cervical spine.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2016

Purpose: The purpose of this study was to determine the effectiveness of direct and indirect methods of contract-relax techniques in proprioceptive neuromuscular facilitation (PNF) stretching for improving hamstring flexibility. Methods: Twenty-six subjects were randomly assigned to either a direct contract-relax technique group or an indirect contract-relax group. For each group, stretching intervention was performed three times a week for a period of two weeks, with 12 seconds for the contraction and 10 seconds for the relaxation per once. The direct contract-relax technique for hamstring flexibility was applied by asking the subject to press down on the shoulder of the trainer in the straight leg-raising position. Conversely, the indirect contract-relax technique was performed by raising the leg with resistance. To facilitate a comparative analysis of hamstring flexibility between the two groups before and after the stretching intervention, two-way repeated ANOVA was performed. Hamstring flexibility for each group was measured using a passive straight leg-raising test. Results: The results showed significant improvement in hamstring flexibility for all subjects in the two groups. However, there was no significant difference between the groups. Conclusion: In conclusion, both direct and indirect contract-relax techniques are confirmed to be useful for improving hamstring flexibility. The choice of suitable technique has to be made individually according to the condition of each subject.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.97-108
• /
• 2006

C. H. OH, S. N. CHOI, T. G. NAM, The Kinematic Analysis of the Tennis Flat Serve Motion, Korean Jiurnal of Sports Biomechanics, Vol. 16, No. 2, pp. 97-108, 2006. By the comparison and the analysis of the different factors during the tennis flat serve motion such as the required time per section, the movement displacement of the racket, the velocity of the upper limbs joints, the physical center of gravity, and the angle and the angular velocity of the upper limbs joints between an ace player and a mediocre player, these following results were drawn. First, the experiment result of the total time required per section in a tennis flat serve motion showed that an ace player was faster than a mediocre player by 0.4 seconds. This result suggested that it was required to increase the speed of the racket head by a swift swing to perform an effective flat serve motion. Second, the experiment result of the movement displacement of the racket in the tennis flat serve motion showed that an ace player greatly moved toward the left side on an x-axis. But both an ace and a mediocre player were shown to be at the similar points on a y-axis at the moment of the impact of the racket. An ace player was also shown to be located at a higher position on a z-axis by 0.23m. Third, the velocity of the center of gravity of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fourth, the velocity of the upper limb joints of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fifth, the experiment result of the speed of the racket head in tennis flat serve motion showed that a mediocre player was faster than an ace player in the first phase, but the latter was faster than the former in the second, third, and the fourth phases. Sixth, at the moment of impact of a tennis flat serve, an ace player had greater flexion of the angle of the wrist joints by an 11.8 degree than a mediocre player. An ace player also had greater extension of the angle of the elbow joint and the shoulder joint respectively by a 5.2 degree and a 1.4 degree with a mediocre player. Seventh, an ace player had greater angular velocity of the upper limb joints and the hip joints than a mediocre player at the moment of the impact of tennis flat serve. Eighth, an ace player was shown to have a greater change of the forward and the backward inclination (or the anterior and posterior inclination) of the upper body

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.165-174
• /
• 2007

The subject of this study was male apparatus gymnastics athlete who had scored high points doing basket with 1/2 turn on parallel bars. Then 3D motion analysis were used to calculate & analyse kinematic variables of Basket with 1/2 turn to Handstand. 1. The total average time spent for Basket with 1/2 turn took $2.16{\pm}.08sec$, at the downward upward phase took $.58{\pm}0.00sec$, $.23{\pm}.00sec$, at flight phase took $.28{\pm}.01sec$, at connected area phase took $.72{\pm}0.21sec$, at rotation area phase took $.35{\pm}.14sec$. To have a successful performance, there should be faster speed and velocity to rotate at the downward upward phase, then the upward velocity and height must be used adequately. Moreover, the speed must be faster at the flight connect phase to stabilize Center of Mass(CM) for the body, and must secure more time at the rotation area to have more stable performance. 2. After handstand on parallel bars while moving CM to right hand side, and It must be performed with big and magnificent performance with putting both hand's center to far away from the parallel bars. 3. Furthermore, CM must be moved fast from downwards to right hand side, and CM must be moved fast in vertical movement at upward and flight phase to avoid CM from moving back and forth, and left and right. 4. At downwards, the subject must rotate as bis as possible using hip-joint as wide as possible and at upwards, must put his body to vertical to have stable performance. While rotating or turning, it is better to do with bigger shoulder angle and have to make sure that trunk angle must be not scattered. To perform better and more positive in basket with 1/2 turn on parallel bars, the centrifugal force must be used big and fast at downward, and at upward and flight phase, downward movement must change to vertical movement as soon as possible while turning movement must happen at handstand position. Time spent must be shorten at connected area to stabilize CM and turning must be natural as possible while securing the necessary time of movement to well-balanced. Also, the body must be vertically closed from the ground.