• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1191-1204
• /
• 2014

Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.246-252
• /
• 2016

In this study, conceptual design of the fore-body hull form of catamaran type dredging vessel was performed that can effectively remove the contaminated sediments in coastal seabed. The hull form was simpled for the easy hull construction and the resistance performance was investigated to find out the effect of hull form parameters between variation of waterline and angle of entrance, etc. The relation between resistance performance and characteristics of free surface flows according to variation of bow forms was investigated by model testing in the circulating water channel and using Ansys CFX. The improvement of ship resistance performance to the wave resistance decrease due to improved wave pattern has been verified according to move the stem and the volume of the shoulder to the fore part of the vessel.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.179-190
• /
• 2015

Objective and Background: Due to increase in Musculoskeletal Disorders (MSDs) relating to computer use, a number of ergonomics recommendations have been proposed in order to tackle this problem. However, some of these recommendations have been conflicting. Method: This study was to survey the VDT (Visual Display Terminal) use of office workers. The subjects were 452 workers at 13 places of business and the data were collected by self-administered questionnaire. Results: As a result, prevalence of self-reported MSDs of all VDT workers was 90.2% and shoulder took up 57.0% and neck 38.3% by symptom part of body. The population of computer use of more than 6h/day was 84.5%, and 33.8% also reported using the VDT 2~3h/day without the rest time. Desktop computer users were 95.6%, and a 17-inch monitor accounted for 42.0% among the desktop users. As a result of satisfaction survey on overall computer work, 21.1% of the total respondents said satisfied, desk complaint was about 24.6%, and chair complaint was 33.4%. Despite the importance of computer environment, satisfaction was from fair to uncomfortable. Conclusion and Application: In conclusion, office workers are prone to the MSDs due to their work environment. Additionally, this study found that task was a significant effect for the majority of dependent variables, and therefore, the improvement of computer workstations work environment is urgent, and the improvement of desk height adjustment, chair seat size (length, width), backrest condition, location of keyboard (mouse) and arm rest is required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.12
• /
• pp.1106-1114
• /
• 2012

To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.159-169
• /
• 1999

The purpose of this study was to study real body size and ideal body shape by considering the relations of between the degree of satisfaction and consciousness of body cathexis and real body size and to understand change of the degree of satisfaction at body part and ideal body shape with the changes of the times by comparing the date taken at 1997 to that taken at 1992. The subjects in this study were 542 and 201 female college students aged from 18 to 25 Body. measurements and survery were taken from April to June 1997, and May to June 1992 Data were analyzed by correlation analysis ANOVA duncan test and crosstabulation analysis The results were as follows : (1) The subjects tended to be satisfied with long and slim limbs silm trunk and preferred to be tall in height and light in weight. But exceptionally they tended to be unstatisfied with small bust as well as big one. (2) The subjects want to be slimmer lower body than upper body. (3) The subjects of 1997 was more statisfied with tall height light weight slim limbs and narrow shoulder than those of 1992. (4) The ideal body shape of the subject of 1997 was slim body while that of the subject of 1992 was big bust and wasp waist. (5) The subject of 1997 was more satisfied with leanner body than that of 1992.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.991-1005
• /
• 2011

This study researches the historical production, process, and design method for 3 pairs of corsets in $18^{th}$ century France. In the analytical stage of historical materials, it grasped the kind, form, origin, and change in style through a lexical definition of relevant terms. Through a precedent study on Garsault's 'L'art du tailleur', preservation costume, and historical reconstruction of pattern in preservation costume, it confirmed corps size, silhouette, pattern form, and material for historical production. The sewing method and the producing sequence were analyzed. In the production stage, 3 selective models in corps plein baleine, corps demi-baleine, and corset were historically produced. With neckline of forming broad Letter U, the bust part is covered roundly. The bodice was composed of 10 panels based on the corps form in the mid-$18^{th}$ century of following a curve of a human body. A shoulder strap was allowed to make the arm movement comfortable by producing and attaching it separately. The cutting line except the center in the front and the back of vertical line was distributed according to the natural flow of a form and movement of the human body. The curve-based pattern line was confirmed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.171-181
• /
• 2009

This study was carried out to evaluate a musculoskeletal symptom and the work posture of the nurses in an operating room who have worked in the present department for more than one year. The job analysis of operating room nurses for ergonomic work posture analysis is divided into 14 tasks. On the basis of that, a survey research and ergonomic work posture analysis are also carried out. Among 41 operating room nurses of a cancer center in Kyonggi province who responded to the self-administered questionnaire, 20 nurses were observed and videorecorded to apply Rapid Entire Body Assessment(REBA) to ergonomic work posture analysis from April 16, 2007 to May 18, 2007. The results of analysis are as follows. The prevalence rate of musculoskeletal symptoms was 75.6% and its prevalence rates by part of the body are these followings; lower back and leg/foot 43.9%, shoulder 36.6%, neck 34.1%, hand/wrist/ finger 22.0%, arm/elbow 14.6%. In accordance with the results of ergonomic work posture analysis, 4 tasks that have a REBA score of 8 have high-risk levels and require an immediate management. It shows there is a significant correlation with overall musculoskeletal symptoms and objective workloads that are estimated by REBA. In conclusion, the work conditions of operating room nurses should be improved. It is also necessary that inappropriate work postures and ergonomic work conditions are improved to prevent musculoskeletal disorders of operating room nurses.

• Korean Journal of Veterinary Pathology
• /
• v.7 no.1
• /
• pp.63-65
• /
• 2003

A 10-year-old Korean native female Jin-do dog revealed two growing subcutaneous masses measuring 7.0 ${\times}$ 7.0 ${\times}$ 2.5 cm and 5.0 ${\times}$ 4.0 ${\times}$ 2.0 cm in the left shoulder and lower part of chest, respectively. Grossly tumor masses were well-circumscribed and exhibited ulcerated surface and purulent exudate on the cut surface. Histologically tumor masses were characterized by cystic structures some of which were fused together. Although the cells of cyst wall differentiated to those similar to infundibulum, isthmus, inferior segment of hair follicles, respectively, the most cyst wall consisted of cells similar to infundibulum The luminal content of cysts depended on the cells of cysts; infundibulum-like cyst contained lamellar keratin, isthmus-like cyst was amorphous keratin, and inferior segment-like cyst had shadow cells. From these results, these tumor masses were diagnosed as multiple trichoepithelioma. To our knowledge, this is the first report of canine multiple trichoepthelioma in a dog in Korea.