• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• Journal of Korean society of Dental Hygiene
• /
• v.3 no.1
• /
• pp.73-87
• /
• 2003

This study was performed on 17 female dental hygienists to find an appropriate method to reduce the hygienists' body discomfort while scaling, and provide a foundation to educate them how 10 posture during the process. To assess the arm abduction, elbow flexion, neck flexion, trunk flexion and trunk lateral bending through Video 2D(two dimensional motion) analysis and assessing the risk through the Action level of RULA(rapid upper limb assessment) checklist, an ergonomic analysis method. Correlation analyses on the posture angles and on body discomfort were performed. ANOVA analysis on scaling treatment position and the scaling treatment region of patients was also performed. The results are as following. 1. 20 analysis while scaling, arm abduction was $40{\sim}79.9^{\circ}$, elbow flexion $20{\sim}110^{\circ}$, neck flexion $50{\sim}100^{\circ}$, trunk flexion $60{\sim}80^{\circ}$, and trunk lateral bending $5{\sim}19.9^{\circ}$. 2. The Action level of RULA was 2. 3 resulted from scores 4 and 5 of group A which includes upper arm, lower ann, wrist, and scores 2 and 4 of group B which includes neck, trunk, legs. It means that the scaling treatment posture causes a high incidence rate of musculoskeletal that an additional investigation and improvement should be followed without hesitation. 3. There were significant differences among the maxilla right, maxilla anterior, maxilla left, mandible left, mandible anterior, and mandible right of a patient of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment. 4. There were significant differences among the time position of 8, 9, 10, 11, 12, 13 of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment, 5. As for the body discomfort, neck, right shoulder, left shoulder, right back, right wrist etc. were listed on top. As a conclusion, performing the time position of 12 which shows low right and left final RULA scores is better than the time position of 8 and 10 which show high final RULA scores to reduce the body discomfort while scaling treatment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.171-181
• /
• 2009

This study was carried out to evaluate a musculoskeletal symptom and the work posture of the nurses in an operating room who have worked in the present department for more than one year. The job analysis of operating room nurses for ergonomic work posture analysis is divided into 14 tasks. On the basis of that, a survey research and ergonomic work posture analysis are also carried out. Among 41 operating room nurses of a cancer center in Kyonggi province who responded to the self-administered questionnaire, 20 nurses were observed and videorecorded to apply Rapid Entire Body Assessment(REBA) to ergonomic work posture analysis from April 16, 2007 to May 18, 2007. The results of analysis are as follows. The prevalence rate of musculoskeletal symptoms was 75.6% and its prevalence rates by part of the body are these followings; lower back and leg/foot 43.9%, shoulder 36.6%, neck 34.1%, hand/wrist/ finger 22.0%, arm/elbow 14.6%. In accordance with the results of ergonomic work posture analysis, 4 tasks that have a REBA score of 8 have high-risk levels and require an immediate management. It shows there is a significant correlation with overall musculoskeletal symptoms and objective workloads that are estimated by REBA. In conclusion, the work conditions of operating room nurses should be improved. It is also necessary that inappropriate work postures and ergonomic work conditions are improved to prevent musculoskeletal disorders of operating room nurses.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.4
• /
• pp.45-56
• /
• 2004

The purpose of this study is to evaluate perceived discomfort of working postures in terms of upper body (back, shoulder, and elbow) flexions when an external load varies. Eighteen subjects participated in an experiment of appraising perceived discomfort of varying upper body postures with three levels of external loads given. The ANOVA results showed that the perceived discomfort of upper body postures was significantly affected by the external load. It was also apparent that the interactions between external load and upper body posture were significant (p< 0.001). The result implies that a new posture classification scheme for workload assessment methods may be in need to reflect such interactions between external load and upper body posture. In order to support the statement, a regression model of perceived discomfort of upper body postures obtained from the experiment was developed and compared to that of perceived discomfort of seven work-related postures found in automobile assembly operations. The correlation coefficient between predicted and actual values of perceived discomfort was about 0.96. It is expected that the result help to properly estimate the body stress resluting from worker's postures and external loads and can be used as a valuable design guideline on preventing work-related musculoskeletal diseases in industry.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.369-375
• /
• 2016

Objective: The purpose of this study was to investigate the possibility of injuries and the types of movement related to damage by body parts, and to prepare for prevention of injuries and development of a training program. Method: For this study, the experiment was conducted according to levels of 60 percentages (ST) and 85 percentages (MA) and 10 subjects from the Korean elite national weightlifting team were included. Furthermore, we analyzed joint moment and muscle activation pattern with three-dimensional video analysis. Ground reaction force and EMG analyses were performed to measure the factors related to injuries and motion. Results: Knee reinjuries such as anterior cruciate ligament damage caused by deterioration of the control ability for the forward movement function of the tibia based on the movement of the biceps femoris when the rectus femoris is activated with the powerful last-pull movement. In particular, athletes with previous or current injuries should perceive a careful contiguity of the ratio of the biceps femoris to the rectus femoris. This shows that athletes can exert five times greater force than the injury threshold in contrast to the inversion moment of the ankle, which is actively performed for a powerful last pull motion and is positively considered in terms of intentional motion. It is activated by excessive adduction and internal rotation moment to avoid excessive abduction and external rotation of the knee at lockout motion. It is an injury risk to muscles and ligaments, causing large adduction moment and internal rotation moment at the knee. Adduction moment in the elbow joint increased to higher than the injury threshold at ST (60% level) in the lockout phase. Hence, all athletes are indicated to be at a high risk of injury of the elbow adductor muscle. Lockout motion is similar to the "high five" posture, and repetitive training in this motion increases the likelihood of injuries because of occurrence of strong internal rotation and adduction of the shoulder. Training volume of lockout motion has to be considered when developing a training program. Conclusion: The important factors related to injury at snatch include B/R rate, muscles to activate the adduction moment and internal rotation moment at the elbow joint in the lockout phase, and muscles to activate the internal rotation moment at the shoulder joint in the lockout phase.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.437-442
• /
• 2012

The current research examines the aching part and the muscle activity that happens during scaling practice subject to 20 dental hygienic students and therefore propose a basic data according to the working attitude of the Dental Hygienist. During the scaling we used the free EMG (BTS Inc., Milan, Italy) to measure the muscle activity, and in order to check the musculoskeletal pain area we used the Nordic-style questionnaire, and the measured research results are as following: At the moment of scaling according to posture the occurrence of the pain showed no difference among the groups elbow, back, leg, knee, ankle/foot but in the neck, shoulder, wrist/hand, waist showed a high difference in the degree of pain according to posture. Results from measuring the muscular activity according to posture, in the group that had a good posture, the trapezius and brachial muscles showed a change according to time, and in the group that had a bad posture a high muscle activity was shown in larynx, trapezius and brachial muscles. In the muscle activity, the changing aspect between the two parts, the group that fulfilled a scaling in a good posture showed a low muscle activity, but in the group that fulfilled the scaling in a bad posture the muscle activity increased excessively. Therefore we examined that when fulfilling a scaling maintaining a bad posture can help in using more effectively the activity of the muscle, in the future I think there is a need to raise the office efficiency by subjecting to dental hyginiest that are in the clinics and performing experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.1-7
• /
• 2006

This study determined the optimal positions of the movable steering wheel and pedal systems of industrial vehicle by various body dimensions. The position of objects and starting driving posture were measured by Martin-type anthropometer and goniometer. The X, Y and Z axis of movable steering wheel and pedal systems were measured horizon distance from right side to left side, horizon distance from front side to rear side and vertical distance from floor to ceiling. During the experiment in order to exclude learning effectiveness with forklift driving, 27 subjects who had male not experiences in driving a forklift used in the experiment. The relationship between the position of steering wheel and driver's posture with body dimensions was analyzed by using correlation relation and paired comparison t-test based on the measured data. The pedal location in X and Z axises was not related with various body dimensions. Also, the steering wheel was different among the angles of the right elbow and shoulder depending on the various body dimensions.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.549-555
• /
• 2013

Objective: The purpose of this study was to compare the performance of drilling on the ceiling in three different postures (standing, standing on the ladder and supine on the height adjusted board) and the subjective responses of perceived discomfort after the drilling. Background: Overhead work has been identified as a major occupational risk factor and has been a main research subject. Method: Ten young participants drilled 20 holes at the pre-marked places on the ceiling in three different postures. The drilling duration, resting and drilling heart rate were measured. The levels of perceived discomfort at neck, shoulder, elbow, hand and overall body were asked at the end of each task. Results: The working posture affected the heart rate after the drilling. Perceived discomfort in the neck decreased significantly in supine compared to drilling on the ladder. Conclusion: The results of this study suggest that drilling in supine can be an alternative way to reduce the drilling heart rate and the level of perceived discomfort in the neck without sacrificing the productivity. Application: The results of this study would be considered when drilling on the ceiling is required in construction workers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1391-1398
• /
• 2011

Biomechanical analysis of arm motion during steering was performed using a motion analysis technique. Three-dimensional position data for each part of arm are fed into an interactive model combining a musculoskeletal arm model and the mechanical steering system to calculate joint angles and torques using inverse kinematic and dynamic analyses, respectively. The analysis shows that elbow pronation/supination, wrist flexion/extension, shoulder adduction/abduction, and shoulder flexion/extension have significant magnitudes. Sensitivity analysis of the arm joint motion with respect to seating posture and steering wheel configuration is carried out to investigate the qualitative influence of the seating posture and driver's seat configuration on the steering behavior.