• Physical Therapy Rehabilitation Science
• /
• 제9권3호
• /
• pp.201-208
• /
• 2020

Objective: This study aimed to identify the effects of performing shoulder and hip abduction during the V-sit exercise on abdominal muscle activity. Design: Cross-sectional study. Methods: Thirty healthy adults volunteered for this experiment. The participants randomly performed 6 types of V-sit exercises, including V-sit alone (hip 0°, shoulder 0°), V-sit with hip abduction 0° and shoulder abduction 15°, V-sit with hip abduction 0° and shoulder abduction 30°, V-sit with hip abduction 15° and shoulder abduction 0°, V-sit with shoulder and hip abduction 15°, and V-sit with shoulder abduction 30° and hip abduction 15°. EMG data were recorded from the rectus abdominis (RA), external oblique (EO), and internal oblique (IO) muscles of both sides. All abdominal EMG data during the six types of V-sit exercises were measured for 5 seconds, three times, and recorded for the middle 3 seconds excluding the 1 second at the start and end. Results: V-sit with shoulder abduction 30° resulted in significantly greater muscle activity of both RA, EO compared to shoulder abduction 0°, shoulder abduction 15° (p<0.05) and V-sit with shoulder abduction 15° showed significantly greater muscle activation of the RA compared with shoulder abduction 0° (p<0.05). The muscle activity of both EO and IO in the V-sit with hip abduction 15° was significantly greater than hip abduction 0° in all shoulder conditions (p<0.05). Conclusions: Greater angles of shoulder and hip abduction produced more abdominal muscle activity increases during the V-sit exercises. Shoulder abduction affected the RA, EO muscle activation and hip abduction affected the EO, IO muscle activation. This study showed that shoulder and hip abduction during V-sit exercises enabled effective activation of the trunk muscles.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.39-46
• /
• 2011

The purpose of this study was to examine differences between players who bend the left elbow and those who stretch it during the forward swing from BST to BC in a 2-handed backhand stroke among outstanding high school tennis players, and to assess the detailed 3D rotational kinematic characteristics of the shoulder and the hip. Statistically significant differences were observed between groups in the longitudinal axis rotation angle of the shoulder and the angle between the shoulder and the arm at BST, and in the side to side movement of the shoulder, the up and down movement of the hip, the side tilt angular velocity of the shoulder, the side tilt angular velocity of the hip, and the front tilt angular velocity of the hip at BC. The difference in the longitudinal axis rotation angle of the shoulder between the 2 groups suggests a difference in the flexibility of the joint in the shoulder arm racquet system. The longitudinal axis rotation angular velocity of the shoulder reached its peak at 75 % of the duration of the analyzed segment and then decreased little by little until BC. This time is considered the stage for increasing the angular velocity of the upper arm, the forearm, the hand and then the racquet, which are more distal segments than the shoulder.

• 복식문화연구
• /
• 제26권1호
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.

• The Journal of Korean Physical Therapy
• /
• 제3권1호
• /
• pp.97-108
• /
• 1991

The purpose of this article is to know the standard figures of joint range of motion, in conjuction with age and sen, for normal adults. The results of assessment and analysis io shoulder and hip joint range of motion are as follows : 1) The average shoulder joint range of motion in normal adults are $160.5^{\circ}$ in flexion, $53.5^{\circ}$ in extension, $159.3^{\circ}$ in adduction, $62.3^{\circ}$ in internal rotation, $83.9^{\circ}$ in external rotation, The average hip joint range of motions are $116.8^{\circ}$ in flexion, $16.1^{\circ}$ in extension, $41.1^{\circ}$ in abduction, $33.8^{\circ}$ in abduction, $40.0^{\circ}$ in interne rotation, $41.2^{\circ}$ in external rotation. 2) There is no significant difference in shoulder and hip joint range of motion between male and female (p>0.05). 3) As to the inter-relation in age and range of motion, the left flexion and extension, internal rotation and right extension in shoulder joint is decreased gradually with increasing age, and left flexion (knee flexion, knee extension) and right flexion (knee extension) in hip joint is decreased with increasing age (p<0.01). 4) Relating to age and sex, the twenties male shows highest range of motion in shoulder and hip joint, with .the fifties female shows, lowest range of motion.

• 대한인간공학회지
• /
• 제15권2호
• /
• pp.15-24
• /
• 1996

To generate workspace analytically using the robot kinematics, data on range of human joints motion, especially range of two degrees of freedom motion, are needed. However, these data have not been investigated up to now. Therefore, in this research, we are to investigate an interaction effect of motions with two degrees of freedom occurred simultaneously at the shoulder, virtual hip(L5/S1) and hip joints, respectively, for 47 young male students. When motion with two degrees of freedom occurred at a joint such as shoulder, virtual hip and hip joints, it was found from the results of ANOVA that the action of a degree of freedom motion may either decrease or increase the effective functioning of the other degree of freedom motion. In other words, the shoulder flexion was decreased as the shoulder was adducted or abducted to $60^{\circ}C$TEX>or abducted from $60^{\circ}C$TEX>to maximum degree of abduction, while the shoulder flexion increased as the joint was abducted from $60^{\circ}C$TEX> to $60^{\circ}C$TEX> The flexion was decreased as the virtual hip was bent laterally at the virtual hip joint, and also did as the hip was adducted or abducted from the neutral position. It is expected that workspace can be generated more precisely based the data on the range of two degrees of joint motion measured in this study.

• 한국운동역학회지
• /
• 제25권3호
• /
• pp.293-300
• /
• 2015

Objective : The purpose of this study was to compare the kinematic data of the horizontal rotation movements of shoulder, hip, knee during two-handed backhand drive stroke according to two different ball directions. Methods : The kinematic variables were analyzed such as the joint angles of the lower body, horizontal rotation angles of the shoulder, hip, inter-knee segment, body twist angle and difference in angle of forward swing. Two-handed backhand drive stroke was analyzed through a three-dimensional motion analysis. The collected data were analyzed by a paired t-test, and the statistical significant value was set at ${\alpha}=.05$. Results : The findings of this study were as follows; First, there was no difference in the total angles of lower limb joints from the forward swing position to impact posterior. Second, there was no difference in the horizontal rotation angles of E1 shoulder, hip, and E2 shoulder but the horizontal rotation angles of E1 knee, E2 hip, knee, E3, and E4 shoulder, hip, and knee were different in all events. Third, there was no difference in the body twist angle of the maximum horizontal rotation. In addition, there was no difference in the angle of the body twist by the ball direction in the shoulder-hip, the hip-knee and the shoulder-knee. Conclusion : Horizontal rotation angle determines ball directions.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.113-130
• /
• 2005

With a view to developing male dress forms for educational purposes, human body measurement was made for male adults in their twenties residing in Busan, Korea. Based on the results, the following conclusion was obtained: 1. Comparison d the measurement in Busan and the data of the 5th Korean physical dimensions(Size Korea) In the comparison of the Busan male adults in their 20s with national physical dimensions(Size Korea) by way of the Mollison relational deviation line, all the 28 items revealed differences less than 0.7. As the Busan sample reflects the body type d the average Korean men in their 20s, Busan's measurement results can be safely used as the data for dress form development. 2. Results of front body type classification According to the factor analysis, seven factors of the front body type were produced to explain 77.25%. The factors were shoulder angles, waist height, hip shapes, chest shapes, proportion of body(chest, waist, hip)width to shoulder width and so on. Cluster analysis brought about three somatotype groups. First, the body type with the least differences in hip-waist width, shoulder-waist with, and hip angles (24,23% in appearance) was named Type H. Second, the body type with the most chest-waist width and hip angles (38.66% in appearance) was called Type Sam X Third, the body type with the greatest shoulder-chest width, shoulder-hip width, and shoulder angles (37.11% in appearance) was termed Type Y.

• 대한인간공학회지
• /
• 제15권2호
• /
• pp.125-135
• /
• 1996

The purpose of this research is to measure range of virtual hip joint and lower limb joints motion such as the hip, knee and ankle joints for 47 young male students. The results of ANOVA revealed that anthropometric dimensions including weight and stature did not show any significant effects on the range of virtual hip joint and lower limb joints motion and the range of motion with two degrees of freedom at the shoulder, virtual hip and hip joints. Anthropometric dimensions such as age, weight, statuire, arm length, shoulder height and leg length were found to be lowly correlated with the range of virtual hip joint and lower limb joints motion. It is expected that the data on the range of joint motion suggested in this study can be used as a valuable input data when designing workplace, predicting human posture and reach volume, etc.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.167-176
• /
• 2007

The purpose of this study was to offer suitable model for performing Tippelt motion and data for training Tippelt motion through the quantitative kinematical analysis of Tippelt motion in parallel bars. The results of analysing kinematic variations through three-dimensional reflection analysis of three members of the national team as the objects of the study were shown as follows. 1. It seemed that the shoulder-joints which are stretched as much as possible affects the whole Tippelt motion while one is swinging downward. The time of process of the center of mass for the body reaching to the maximum flection point should be quick and body's moving from the vertical phase to the front direction should be controled as much as possible. 2. While one is swinging upward, the stability of flying motion could be made certain by the control of body's rapid moving to the front direction and stretching shoulder-joints and hip-joint to reverse direction. 3. While one is flying upward, the body should be erected quickly and lessening the angle of the hip-joint affects the elevation of flight. When the powerful counter turn motion is performed, the stable motion could be made. As a result of this study, It seems that sudden fall and the maximum stretch of shoulder-joints is important during performing Tippelt motion in parallel bars. Also, it concludes that the maximum bending of hip-joints at the starting point of upward swing, sudden stretch to the reverse direction of shoulder-joints and hip-joints when one is leaving bars, control of body's moving to the front direction, and lessening the angle of hip-joints at the flying phase is important.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.487-495
• /
• 2010

The purpose of this study was conducted to make a comparative biomechanical analysis of X-factor and X-factor stretch during driver and iron swing. The subjects were composed of 10 professional golfers with more than 10 years career. The result was as follows: First, the analysis of the back swing with driver and iron swing showed no differences statistically between both the timing in horizontal rotating of shoulder and hip, the time required for X-factor stretch also showed no differences statistically. Second, the back swing with a driver swing showed more maximum horizontal rotation of shoulder and hip joint than the back swing with an iron swing, but the twist of shoulder and hip that was X-factor stretch angle showed no difference. Third, the GRF of the max value for the left and right foot during shoulder and hip horizontal rotation of back swing showed no differences statistically in the movement of driver and iron swing during the back swing, and the GRF of X-factor stretch for the left and right foot showed no differences statistically in driver and iron swing. Therefore the result of this research showed that the operation of torso(X-factor stretch) and weight shifting were similar although the horizontal rotation of body was different during the driver and iron swing.