• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.123-137
• /
• 2001

PIV (particle image velocimetry) systems use a camera to take snapshots of particles carried by a fluid at some precise instants. Signal processing methods are then used to compute the flow velocity field. In this paper, the design of the camera objective (optics) is addressed. The optimization is done in order to maximize the signal-to-noise ratio of in-focus particles. Four different kinds of noise are considered: photon shot noise, thermal and read noise, background glow shot noise, and noise made by the other particles. A semi-empirical model for the lens aberrations of a two-doublet objective is first addressed, since further, it is shown that lens aberrations (low f-value $f_{\#}$) should be used instead of the Fraunhofer diffraction (high f-value) for the fitting of the particle image size with the pixel size. Other important conclusions of the paper include the expression of optimum values for the magnification M, for the exposure period $\tau$ and for the pixel size $\xi$.

• 한국방재학회 논문집
• /
• 제5권1호
• /
• pp.63-68
• /
• 2005

영상 해석을 이용한 유속 측정 방법인 LSIV를 합류점의 수리 모형 실험에 적용하였다. LSIV에 의해 측정된 표면 유속은 유속계에 의해 측정된 평균 유속과 상당히 유사한 결과를 나타내었다. 일반적인 유속계는 순간적인 지점 유속만을 나타내기 때문에 전체적인 유속장을 살피는 데 어려움이 있으나, LSIV는 전체적인 흐름장의 양상을 한 눈에 살펴 볼 수 있는 좋은 도구이다. 특히 합류점이나 교각 주변부와 같이 흐름이 국부적으로 변화가 심한 경우 LSIV는 적절한 실험 도구가 될 수 있을 것이다.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.457-467
• /
• 2010

This study intends to analyze the projection factors' difference on each record of women's javelin throwing. For this purpose, the research analyzed the best record and the lowest one of athletes in top 1~7 ranks respectively, who participated in 2009 Daegu Pre-Championship Meeting. For analyze kinematic factors, we analyzed their game photos mainly shot by 3 cameras installed in side places. The used analysis program was Kwon3D 3.1. Analysis variables were the projection velocity, angle, height, trunk lean angle, and supporting leg's knee angle. The results concluded as follows: Different record showed statistically significant differences(p<.05) in terms of horizontal velocity and resultant velocity. There were no statistically significant differences in the variables of projection angle, its height, trunk lean angle and knee angle of support leg. But for the analyzed results to each individual characteristics, the horizontal velocity, projection height, knee angle of support leg and trunk lean angle of release event appeared to have influence on record.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.830-835
• /
• 1998

The characteristics of the ablation plume generated by 532 nm Nd: YAG laser irradiation of a Pb(Zr0.52Ti0.48)O3 (PZT) target have been investigated using a pulsed-field time-of-flight mass spectrometer (TOFMS). The relative abundance of O+, Ti+, Zr+, Pb+, TiO+, and ZrO+ ions has been measured and discussed. TiO+ and ZrO+ ions were also found to be particularly stable within the laser ablation plasma with respect to PbO+ species. The behavior of the temporal distributions of each ionic species was studied as a function of the delay time between the laser shot and the ion extraction pulse. The most probable velocity of each ablated ion is estimated to be Vmp=1.1-1.6x 105 cm/s at a laser fluence of 1.2 J/cm2, which is typically employed for the thin film deposition of PZT. The TOF distribution of Ti+ and Zr+ ions shows a trimodal distribution with one fast and two slow velocity components. The fast velocity component (6.8x 10' cm/s) appears to consist of directly ablated species via nonthermal process. The second component, originated from the thermal evaporation process, has a characteristic velocity of 1.4-1.6 x 105 cm/s. The slowest component (1.2 x 105 cm/s) is composed of a dissociation product formed from the corresponding oxide ion.

• 한국자기학회지
• /
• 제25권3호
• /
• pp.83-86
• /
• 2015

무기체계가 첨단, 고도화되면서 탄약을 정밀 제어하여 목표를 타격하기 위하여 공중폭발탄(ABM)이 개발되어 전장에서 운용되고 있다. 이러한 공중폭발탄의 시한정밀도를 향상시키기 위하여 총구를 이탈하는 탄의 속도를 측정하여 표적까지의 정확한 비행시간을 계산한 후 탄에 입력하여야 한다. 본 연구에서는 K4 기관총의 소염기 부분에 탄을 감지할 수 있는 장치를 도입하였다. 탄약의 주요 금속 부품은 신관 부분의 알루미늄과 파편 효과를 발휘하는 탄체의 철 부분, 총열의 강선부를 통과할 때 직진운동을 회전운동으로 전환시키는 회전탄대의 구리로 구성되어 있는데 알루미늄 부분을 탐지하기 위하여 와전류 탐촉자의 원리를 도입하였다. 탄이 총구를 벗어나는 수십 us 동안 탄속을 측정하기 위하여 U 자형의 MnZn Ferrite 코어에 코일을 권선하여 200 kHz의 교류 전류를 인가하여 탄의 총구 이탈 속도를 측정하였으며, 도플러 레이더와 병행 계측한 결과 ${\pm}1%$ 이내에서 잘 일치하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.197-202
• /
• 2007

Most of seismic reflection prospecting assumes subsurface formation to be homogeneous media. These models are not capable of estimating small scale heterogeneity which is verified by well log data or drilling core. And those synthetic seismograms by homogeneous media are limited to explain various changes at field data. So we developed a inhomogeneous velocity model which can estimate inhomogeneity of background medium to implement numerical modeling from homogeneous medium and inhomogeneous medium on the model. Background medium using three autocorrelation functions in order to generate inhomogeneous velocity media was according to dominant wavelength of background medium and correlation length of random medium. And then we compared shot gathers. The results show that numerical modeling implemented at inhomogeneous medium depicts complex wave propagation of field data.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.223-226
• /
• 2005

동일한 파원에서 발생된 P, SH, SV 파를 3성분 지오폰으로 동시에 기록하는 방법을 연구하기 위해서, 94 m의 측선을 따라 2 m 간격으로 설치한 수신점에서 기록된 24채널 자료를 512 ms동안 기록하였다. 원시자료의 수직성분에는 P파가 초동으로 뚜렷하게 나타나며, 측선방향과 수직한 수평성분은 P파가 약화된 반면 S파의 신호/잡음비가 향상된 모습을 보인다. 토모그래피 역산을 통해 계산된 P파 및 S파의 속도 토모그램을 이용하여 동포아송비의 2차원적 분포를 산출한 결과, 동포아송비는 $0.2{\~}0.3$의 범위로 분포하며, 이는 한번의 타격으로 P파 및 S파의 속도분포와 더불어 및 동포아송비의 2차원적 분포까지 획득할 수 있다는데 큰 의의가 있다고 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.118-126
• /
• 2003

In the present study, the residual stresses can have a significant on the life of structural engineering components. Residual stresses are created by the surface treatment such as shot peening or deep rolling. The objective of this experimental investigation is to study the influence of friction and wear characteristics due to residual stress under dry sliding condition. Friction and wear data were obtained with a specially designed tribometer. Test specimens were made of SUP9(leaf spring material) after they were created residual stress by shot peening treatment. Residual stress profiles were measured at surface by means of the X-ray diffraction. Sliding tests were carried out different contact pressure and same sliding velocity 0.035m/s(50rpm). Leaf spring assembly test used to strain gauge sticked on leaf spring specimen in order to measure interleaf friction of leaf spring. Therefore, we were obtained hysteresis curve. As the residual stresses of surfaces increased, coefficient of friction and wear volume are decreased, but the residual stresses of surfaces are high, and consequently wear volume do not decreased. Coefficient of friction obtained from leaf spring assembly test is lower than that obtained from sliding test. From the results, structural engineering components reduce coefficient of friction and resistant wear in order to have residual stresses themselves.

• Smart Structures and Systems
• /
• 제23권4호
• /
• pp.359-371
• /
• 2019

As part of a structural health monitoring system, the relative geometric relationship between a ship and bridge has been recognized as important for bridge authorities and ship owners to avoid ship-bridge collision. This study proposes a novel computer vision method for the real-time geometric parameter identification of moving ships based on a single shot multibox detector (SSD) by using transfer learning techniques and monocular vision. The identification framework consists of ship detection (coarse scale) and geometric parameter calculation (fine scale) modules. For the ship detection, the SSD, which is a deep learning algorithm, was employed and fine-tuned by ship image samples downloaded from the Internet to obtain the rectangle regions of interest in the coarse scale. Subsequently, for the geometric parameter calculation, an accurate ship contour is created using morphological operations within the saturation channel in hue, saturation, and value color space. Furthermore, a local coordinate system was constructed using projective geometry transformation to calculate the geometric parameters of ships, such as width, length, height, localization, and velocity. The application of the proposed method to in situ video images, obtained from cameras set on the girder of the Wuhan Yangtze River Bridge above the shipping channel, confirmed the efficiency, accuracy, and effectiveness of the proposed method.