• 융합신호처리학회논문지
• /
• 제1권1호
• /
• pp.58-63
• /
• 2000

본 논문에서는 MPEG으로 압축된 영상에 대해서 급격한 장면 변화에 의한 shot 경계(cut)와 점진적 장면 변화에 의한 shot 경계(dissolve)를 검출하여 비디오 shot을 분할하는 기법을 제안한다. 제안하는 shot 경계 검출 기법은 기존에 잘 검출하지 못하였던 점진적 장면 변화에 의한 shot의 경계검출을 위한 알고리즘이다. 먼저 압축영역의 기법 중 DCT DC 값을 비교하는 방법을 이용하여 급격한 장면 변화에 의한 shot 경계를 검출한다. 그리고 움직임 벡터(MV)의 비를 비교하는 방법을 사용하여 점진적 장면 변화에 의한 shot 경계의 후보지들을 얻어내고, 선택된 후보지들 중 n번째와 n+2번째 후보지 영상으로 feded image를 만들어 n+1번째 후보지의 영상과 유사도를 비교하여 점진적 장면 변화에 의한 shot 경계를 검출한다. 이와 같이 압축영역의 기법으로 급격한 장면 변화에 의한 shot 경계와 점진적 장면 변화에 의한 shot 경계 후보지를 검출해 내고, 검출된 shot 경계 후보지들에서 점진적 장면 변화에 의한 shot 경계를 검출하는 방법을 함으로서 MPEG 비디오 영상의 복원량을 최소화하여 수행 속도를 높이면서도 급격한 장면 변화에 의한 shot 경계와 점진적 장면 변화에 의한 shot 경계, 두 가지 모두를 효과적으로 검출할 수 있었다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권7_8호
• /
• pp.727-743
• /
• 2003

본 논문에서는 축구 동영상에서 스포츠 중계방송의 구조적 특성을 이용하여 자동적으로 하이라이트(Highlight)를 추출하는 새로운 방법을 제안하고 실험을 통하여 그 유용성을 증명한다. 일반적으로 스포츠 중계 방송에서는 중요한 이벤트(골, 반칙)가 발생하면, 그 장면을 다시 느린 속도의 리플레이(Replay) 화면으로 보여주고, 리플레이가 시작되고 끝날 때 Wipe와 같은 점진적인 화면 전환 기법을 사용하는 구조적 특성을 가지고 있다. 본 논문에서는 이러한 스포츠 중계방송의 구조적 특징을 이용하여 축구동 상의 중요한 이벤트만을 추출하여 하이라이트를 생성하는 방법을 제안한다. 이를 위해 본 논문에서는 비디오의 슬라이스 이미지(Slice Image)를 이용하여 Wipe효과 장면과 줌인/아웃 장면을 검출하고, 검출된 Wipe 효과 지점을 기준으로 하여 리플레이 장면을 검출한다. 이때 이런 기본 알고리즘에 새로이 Sub-Sampling방법과 Two-Pass 방법을 더하여 보다 빠르고 정확한 Wipe검출을 하였고, 비디오의 모션 정보 및 Wipe지점의 시간간격을 이용하여 보다 정화한 리플레이 장면을 검출하였으며, 샷의 녹색영역 비율을 측정하여 보다 정화한 줌인/아웃 장면을 검출하였다. 이렇게 최종적으로 검출된 리플레이 장면과 줌인/아웃 장면을 토대로 이벤트 샷(Shot)과 선수 샷으로 구성된 하이라이트 장면을 추출하게 된다. 이러한 방법은 자동적으로 축구 중계방송을 요약해줌으로써 축구와 관련된 웹서비스나 방송용 하이라이트 제작에 유용하게 사용될 수 있을 것이다.

• 복식문화연구
• /
• 제32권1호
• /
• pp.58-69
• /
• 2024

The purpose of this study was to develop the Functional golf inner-wear by preventing the injuries and enhancing the performance of the Golf swing by checking the influence of the wearing of the functional golf inner-wear considering golf characteristics on the Swing trajectory and Shot distance. Functional inner-wear effective for golf swing was manufactured using the sports taping method. Changes in driver and iron swing before and after wearing the functional golf inner-wear manufactured in this way were measured using trackman equipment. Measurement variables were limited to Club Speed, Attack Angle, Club Path, Ball Speed, Smash Factor, and Priority. Before and after wearing functional golf inner-wear, there were statistically significant differences in driver club speed, iron club speed, driver etch angle, iron club pass, driver ball speed, driver smash factor, iron smash factor, driver carry, iron carry, and right shoulder joint proprioceptive sensory ability. As a result, functional golf inner-wear is effective for ball speed, impact, and carry by increasing club speed and efficient swing. Future research will focus on the development of functional golf that can improve the swing ability in a short game that plays an important role in the golf game through various sports taping grafting technique, textile, special material, film, Research on functional golf inner-wear.

• 천문학회보
• /
• 제44권1호
• /
• pp.54.2-54.2
• /
• 2019

Removing noise which occurs inevitably when taking image data has been a big concern. There is a way to raise signal-to-noise ratio and it is regarded as the only way, image stacking. Image stacking is averaging or just adding all pixel values of multiple pictures taken of a specific area. Its performance and reliability are unquestioned, but its weaknesses are also evident. Object with fast proper motion can be vanished, and most of all, it takes too long time. So if we can handle single shot image well and achieve similar performance, we can overcome those weaknesses. Recent developments in deep learning have enabled things that were not possible with former algorithm-based programming. One of the things is generating data with more information from data with less information. As a part of that, we reproduced stacked image from single shot image using a kind of deep learning, conditional generative adversarial network (cGAN). r-band camcol2 south data were used from SDSS Stripe 82 data. From all fields, image data which is stacked with only 22 individual images and, as a pair of stacked image, single pass data which were included in all stacked image were used. All used fields are cut in $128{\times}128$ pixel size, so total number of image is 17930. 14234 pairs of all images were used for training cGAN and 3696 pairs were used for verify the result. As a result, RMS error of pixel values between generated data from the best condition and target data were $7.67{\times}10^{-4}$ compared to original input data, $1.24{\times}10^{-3}$. We also applied to a few test galaxy images and generated images were similar to stacked images qualitatively compared to other de-noising methods. In addition, with photometry, The number count of stacked-cGAN matched sources is larger than that of single pass-stacked one, especially for fainter objects. Also, magnitude completeness became better in fainter objects. With this work, it is possible to observe reliably 1 magnitude fainter object.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.373-378
• /
• 2007

On the homodyne interferometers, high pass filter(HPF) is usually used to remove the electrical noise in the interferent signal. Heterodyne interferometer has modulating frequency is shifted in the frequency region where the electrical noise effect is minimized by HPF effect. However, on the homodyne interferometer, the interferent DC-component of homodyne interferometer is unfortunately eliminated by using a HPF because its shifted frequency does not exist. Moreover, this effect is more serious the vibration amplitude is smaller. So, when unstable interferent signals via HPF are demodulated, a velocity is distorted. In this work, the mathematical explanation for the distortion of the homodyne interferent signal using the HPF is given. New synthetic heterodyne LDV based on the homodyne interferometer by exciting the reference mirror is proposed for the cancellation of the distortion. The optimum excitation condition of the mirror to compensate the distortion is discussed. The numerical simulation using the commercial MATLAB code is provided to show the effect of the proposed synthetic heterodyne LDV. The experimental results are also given and the effect of the proposed LDV is discussed.

• 한국조경학회지
• /
• 제32권1호
• /
• pp.33-46
• /
• 2004

This study is aimed to redesign established parks and to propose a series of devices protecting them from vandalism. To solve the problems, we ascertained the damaged areas of the park greens. The trace analysis was performed to grasp the transverse inside the parks of Jeonju and Iksan in Collabuldo. Then, we presented the basic plan for minimizing park damage and for remodeling the system of movement. The results of the study are summarized as follows: it is identified that the transverse phenomenon is considerably wide-spread in majority of parks, and has no relationship to the park area or the green area. It is considered that the $\ulcorner$Condition rating class$\lrcorner$ of grass damage, which is grade 6, is extraordinarily high and the damage is accumulated considerably. Also, the damage part of other grade is discovered equally, and when unattended, the acceleration of damage is positive. A damage width a 0.5∼1.5m makes up the greater part of 79.6%. It also constitutes most of a rectilinear form. The difference in the height between the original point and destination point is below 0.7m, which is above 70%. It is identified that the interrelationship between the damage continuation length and plan distance is relatively high by the simple regression: analysis and by Pearson' correlation analysis. In spite of the normal damage continuation length is 20m, the frequency degree is downward with extreme point at 10m. Accordingly, it is assumed that park users have physical and psychological pressure when they cross the lawn field. Damage types are classified as the Simple cut cross type, the Behavioral facilitates type, Access advantage type and the Strolling type through type classification. It is considered that this classification is effective when identifying short pass type on lawn field according to the damage length and intensity.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.136-136
• /
• 2001

Purpose： Subclavian steal refers to the retrograde flow of blood in a vertebral artery that supplies t ipsilateral shoulder and arm caused by proximal subclavian artery stenosis or occlusion. T purpose of this exhibit is to demonstrate MR findings of subclavian steal on contrast-enhanc 3D (CE 3DMRA) and 2D TOF MR angiography. Method： Four patients(men 3 and women 1, age： 28-78years) with subclavian steal obtained both CE 3DMRA and digital subtraction angiography(DSA) including subclavian arterie Sequential imaging was undertaken during first pass after double dose of Gd-DTPA (0 mM/kg) Injected by a power injector. Coronal source images were obtained with coronal D-fast low angle shot sequence(TR/TE/flip angle=3.8/l.3/35, acquisition time= 10sec/one measurement). Precontrast imaging was subtracted from enhanced images and maximu intensity projection was done. 2D time-of-flight MR angiography(2D TOF) of the carot bifurcation was added in all cases with post-saturation. All studies were review retrospectively.

• 한국표면공학회지
• /
• 제34권4호
• /
• pp.327-336
• /
• 2001

The skinpassing conditions such as roll type, roll force and roll roughness of the work roll were evaluated to give the surface properties of the galvanized steel sheets that were required for automotive and to get rid of the surface defects that caused with the bad control of galvanized coating process parameters. The surface defects of the galvanized steel sheets such as the ripple mark and the scratch were completely removed as the roll force of SPM work roll was increased and the amount of the transfer of roll surface texture to the strip was also gained a lot. The image clarity of electro discharge textured (EDT) coated steel sheets before and after painting was higher than that of the bright (BRT) and shot blasted (SBT) coated steel sheets because of higher PPI value, lower waviness and uniform surface pattern. Since micro-craters transferred on the surface of the galvanized steel sheets played a role of nucleation sites of chromate reaction, Increase of micro-craters was bring to better corrosion resistance with the increase of the roll force and the use of EDT roll at the skin pass mill.

• 한국운동역학회지
• /
• 제33권4호
• /
• pp.185-195
• /
• 2023

Objective: The purpose of this study is to improve TPI OnBaseU Power Test and golf performance by conducting CrossFit power training. Method: Three male golf players from University B participated in this study. They had 3 to 4 years of golf experience and participated in 8 weeks of CrossFit power training. Results: OnBaseU Power Test: There was a lot of improvement in Sit up throw (27.9%) and Chest pass (10.58%), but there was not much improvement in Baseline Toss (R5.9, L9.8%) and Vertical Jump (4.1%). Golf shot data: There was a very statistically significant difference in Club speed, Ball speed, and Total Length, which are related to speed, and there was no difference in Club path and Smash factor, which are related to accuracy and posture. Conclusion: CrossFit power training was effective in improving TPI OnBaseU Power Test and golf performance (Club speed, Ball speed, Total Length).

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.