• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.423-427
• /
• 2003

In this paper, LTCC stacked patch antenna with a radial CPW fed slot and grounded-shorting vertical-via wall for 19GHz band wireless LAN is presented. Suggested antenna employed a patch and grounded-shorting vertical-via wall for radiation element, consist of feeding structure which a radial open feature at the end of the CPW feed line. The optimal design parameters of the antenna using by EM simulation program. We can see that enough to bandwidth 560MHz for 19GHz band WLAN antenna specification by the optimized antenna.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.600-602
• /
• 2008

A very small patch-type RFID tag antenna (UHF band) using ceramic material mountable on metallic surfaces is presented. The size of the proposed tag is 25 mm${\times}$25 mm${\times}$3 mm. The impedance of the antenna can be easily matched to the tag chip impedance by adjusting the size of the shorting plate of the patch and the size of the feeding loop. The measured maximum reading distance of the tag at 910 MHz was 5 m when it was mounted on a 400 mm${\times}$400 mm metallic surface. The proposed design is verified by simulation and measurements which show good agreement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.135-141
• /
• 2008

In this paper, a design method of broadband horn antenna having 3:1 bandwidth and multiple polarization characteristics is proposed. The feeding section of the antenna adopts quadruple-ridged waveguide type for broadband and multiple polarization characteristics of the antenna. By inserting a shorting bar in the cavity structure with a semi-sphere type back short, the return loss at the feeding section was minimized. A corrugated dielectric lens is designed for phase compensation and lens-surface matching at the antenna aperture, which improves the antenna beam pattern. The validity of the design method is verified by indicating the measured data of the antenna.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.177-182
• /
• 2013

In this paper, printed antenna which can be applied to a built-in wireless module of the security controller operating at global positioning system(GPS) L1 frequency band(1.575GHz) is proposed. The proposed antenna is basically composed of a microstrip patch antenna with inserting feed. In particular left and right slots which are respectively asymmetric are used for impedance matching, whereas slot with one open-end and shorting point are used on the bottom plane to set operating frequency and enhance bandwidth. It is observed at the desired GPS L1 frequency band that the radiation efficiency and gain of the proposed antenna are 90% and more than 4.8dBi respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.50-55
• /
• 2008

In this paper, multi-band internal antenna which can adjust both resonant frequency and input impedance of antenna as using lumped inductor between shoring plate and ground plane is proposed. The structure of proposed antenna consists of PIFA (Planar Inverted F Antenna) structure and half-wavelength loaded line structure and has two shorting plates and one feeding plate. One shorting plate is shared. The operating frequency bands of designed antenna are GSM, GPS in the PIFA structure and DCS, US-PCS, W-CDMA in half-wave loaded line structure as varying the inductor value in 2.2nH, 3.3nH, and 4.7nH. As varying the inductor value in the shared shorting plate, input impedance of antenna is varied. To minimize the gain variation of antenna as adding lumped element, the inductor value is restricted at maximum of 6.8nH. The maximum gain of proposed antenna is measured as -1.60dBi in the GSM band, -1.16dBi in the GPS band, and 1.41dBi in the DCS/US-PCS/W-CDMA band.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.274-277
• /
• 1997

Eddy current effect in a high speed rotor suspended by a mangnetic bearing is invstigated using electromagnetic field analysis technique. The non-zero conductivity model of a laminated rotor sleeve is proposed to concern electrical shorting of laminates due to rub, handling or press fit assembly,et al. As the rotating speed increase, the distibution of magnetic flux line is changed and the magnetic forces decrease remarkably. ANSYS Magnetics (version 5.3) is used for the magnetic field analysis.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.119-121
• /
• 1998

Phase controller is made and tested to estimate the characterics of superconductor. Phase controller using the DSP2104 can determine the closing phase angle and period of transport current increased by shorting bypassed circuit. In this paper, the experimental results are described.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.99-104
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of PIFA(Planner Inverted F Antenna). The resonant frequency as well as amount of coupling between feeding point and shorting post can be adjusted by changing inductance. Because the inductor is connected on shorting post where the strength of electric field is weak, the performance reduction of the proposed antenna is very small enough to neglect. For the variation of the inductance value within 3.3nH, the resonant frequency of antenna can have operating range of 1650MHz ~ 1830MHz. And as be increased the inductance, the coupling coefficient of antenna is over coupled. This means that it can be electrically controlled the resonant frequency and input impedance of antenna by inductance and minimized the mismatch loss. Size reduction of 10% for PIFA is obtained without any major modifications of antenna elements. For the frequency range from 1650 to 1830MHz, reduction of the measured antenna gain is within 0.93dB as varying the value of inductance from 0 to 3.3nH.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.792-797
• /
• 2006

In this paper, an internal integrated microstrop patch for PCS handset is designed. To increase the bandwidth of microstrip patch antenna, a configuration of stacked type using parasitic element is used. Furthermore, to reduce the size of microstirip patch antenna, the main radiator in the substrate is shorted to the ground plane using five shorting-posts while three parasitic elements on the superstrate are also shorted to the ground plane using two shorting-posts respectively. The antenna bandwidth and radiation characteristics are calculated by HFSS 7.0 software, and compared with the experimental results. Experimental results show that the return loss is less than -10dB over the band of 1766MHz to 1900 MHz(134MHz) and the size of the fabricated microstrip patch antenna are $23\times20\times6.35mm$.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.19-25
• /
• 2023

Although a lot of research and development has been conducted on the performance improvement of PEM (Proton Exchange Membrane) water electrolysis, the research on durability is still in early stage. This study investigated effect of temperature on the water electrolysis durability when driving temperature of the PEM water electrolysis was increased to improve performance. Voltage change, I-V, CV (Cyclic Voltammetry), LSV (Linear Sweep Voltammetry), Impedance, and FER (Fluoride Emission Rate) were measured while driving under a constant current condition in a temperature range of 50~80 ℃. As the operating temperature increased, the degradation rate increased. At 50~65 ℃, the degradation of the IrO₂ electrocatalyst mainly affected the durability of the PEM water electrolysis cell. At 80 ℃, the polymer membrane and electrode degradation proceeded similarly, and the short resistance decreased to 1.0 kΩ·cm² or less, and the performance decreased to about 1/3 of the initial stage after 144 hours of operation due to the shorting phenomenon.