• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.519-530
• /
• 2022

As online commerce increases, the construction of large logistics buildings worldwide is exploding. Most of these buildings have the characteristics of long span and heavy loaded and use precast concrete components, a pin joint structure, for rapid construction. However, due to construction safety and structural stability requirements, the pin joint structure has many limitations in terms of the erection of the PC member, which increases the time and cost. A structural frame connected with steel joints between precast concrete components, called a SMART frame, has been developed, which addresses these constraints and risks. However, the effect of the appllication of a SMART frame on the time aspect has not been analysed. The study is a time reduction effect analysis of a SMART frame for long span and heavy loaded logistics buildings. For this study, the authors select a case site erected using existing PC components, and compare the time reduction with the SMART frame erection simulations. Through this analysis, it was found that a time reduciton about 4 months, approximately 48% of the conventional PC installation period could be achieved. If the SMART frame is applied when carrying out future large-scale logistics building projects, it can be expected to have the effect of significantly shortening the construction period compared to the conventional method.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.12-20
• /
• 2015

Construction industry pays attention to modular construction recently which based on factory production not on labor intensive site production. Since modular construction has high time shortening effect and easiness of demolition and recycling, it has been applied to the temporary residential building. Domestic modular construction market are not activated yet, however, due to the high initial cost to realize modular construction. This study proposes demand-sensitized movable modular building in order to reduce the financial burden. The study compares between RC method building and Modular building which moves building when the demand falls off from Life-Cycle Cost's viewpoint. As a result of the economical evaluation, RC method achieved profits faster than Modular model, but Modular model's gross earnings during the life-cycle are much bigger than RC method. In other words, the result means that the market-sensitized movement of the modular building would be an economci choice in Life-Cycle Costing aspect.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.44-52
• /
• 2002

The mechanism of pullout resistance of compression anchor is analysed. This anchor is developed through the field pullout tests and the laboratory element test. The compression anchor is characterized by decrease of progressive failure, simple site work, economy and durability compared with tension anchor. The characteristics of compression anchor, compared with tension anchor. mainly are summarized as follows ; (1) The plastic displacement of anchor body is very small during pullout of anchor. (2) Total anchor length decreases by the shortening of free length; (3) The progressive failure is decreased.; (4) The safety factor for pullout resistance increases with time after construction of anchor.

• Korean Journal of Veterinary Research
• /
• v.24 no.1
• /
• pp.105-109
• /
• 1984

Five Korean native goats were employed to test the effectiveness of the two modified techniques (Method I and II) of Pawlow's pouch method, Both methods turned out to be successful and simpler than the original pawlow's pouch method. In both methods, the miniature rumens were formed on the junction of two veins; versa ruminalis sinistra and vena ruminalis dextra. Both method I and II have the advantage of shortening the operation time, but caution is necessary to prevent the fistula formation between the rumen and miniature rumen in Method I.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.10-17
• /
• 2003

The amount of production orders from Japanese car and construction machine industries have slightly increased in 2002, but the costs of the forged parts have decreased due to severe competitions with the other Asian countries. Most of the forging industries and some universities are making more efforts for technological researches and developments to meet the demand for higher accuracy and higher quality products, shortening of delivery time, and development of forged parts for new industrial fields. Some helical gears of which surfaces can be net-shaped have been started for commercial base production to be shipped to car industries. Some non-graphite lubricants for hot forging and some conversion coating free lubricants for cold forging have been developed to improve some environmental problems.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.342-348
• /
• 2002

The welding technology for production of power plant facility as for other industries has been progressing forward automation and mechanization for cost reduction and shortening of cycle time. The welding for boiler tube is automated or mechanized as the parts and subassemblies of tubes are conveyed automatically in the shop. The temperature of boiler stearn is being progressively increased for higher plant efficiency. The welding of nuclear component is characterized by heavy thickness and narrow gap Submerged Arc Welding. Narrow gap Gas Metal Arc Welding and Electron Beam Welding is applied to turbine diaphragm. To improve the resistance of solid particle erosion of turbine blade and nozzle partition, HVOF spray technology and boriding process has been applied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.20-21
• /
• 2017

There have been reports in the media about some refineries that omit the refining process and deliver raw material for reasons of cost reduction, shortening of production time, etc. Also, in most RMC factories acceptance inspection is not conducted on account of issues with the proficiency of the equipment and cost issues; instead only scores are relied upon. Therefore this study sought to analyze the relation between the value of the density of FA actually delivered to RMC companies, attained with the Hydrometer method, and its fineness, to see whether the quality of FA can be evaluated statistically. Results led to the conclusion that there is a problem in terms of credibility in the fineness of FA shown on the test report. Upon analyzing the difference between the fineness of FA as measured using Blaine's air permeability method and its density of the Hydrometer method, the correlation was found to be satisfactory; therefore the possibility of a FA fineness quality evaluation could be proved as well.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.49-50
• /
• 2016

Recently in Korea, some studies on concrete that mass quantity of additives are substituted in order to respond to the government's Low Carbon Green Growth Policy are being conducted. As on of additives, FA as an industrial by-product is used in a large quantity. However, In some of the domestic FA refineries, since some quantity of concrete without passing through the refining process is released for sales for the reasons of the shortening of production time and the cost reduction, etc., it exerts a bad influence on the quality of concrete. Therefore, in this study, there was implemented an experiment on the effects of using an extreme quality of FA which is available for distributing domestically on the engineering characteristics of lean mortar. As a result, it was found that the quality of FA exerts its effect on the compression strength bigger than the flow property or the air volume.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.432-439
• /
• 2003

In this research, we are trying to develop the new hydraulic driven tire roller which is conventionally operated by mechanical transmission system. The reason why we would like to develop it is that tire roller is one of the most useful machine for the road construction site and also imported totally from overseas. In this paper, we conceptualize the new hydraulic system and derive the equations of motion for dynamic analysis. And we investigate system modeling by using DAQ system. Finally, we will design the controller, which can manage the hydraulic circuit of steering and traction mechanism system. The advent of modern high-speed computers coupled with the application of high-fidelity simulation technology can be used to create “virtual prototypes of construction equipment. Tests conducted on these virtual prototypes may be used to augment actual machine testing, thereby lowering costs and shortening time to production. So, we studied tire roller to integrate development technology. In System Analysis, We formulate hydraulic driving system model and hydraulic steering system model. Also, We integrate DAQ system to acquire experimental result in real tire roller equipment.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.174-181
• /
• 2004

We will introduce a method of construction of super-block curtain wall applied to Tower Palace III which is the highest high-rise complex building in Korea. Up-up method is utilized on Tower Palace III to shorten the term of works and it is that the curtain walls for the belt wall part are installed after the rests. The belt wall structure increases the horizontal structural stiffness of the building. The method of construction of super-block curtain wall is developed and used to raise and install the curtain wails of the belt wall floor. It is that the large block of curtain walls corresponding to three stories is fabricated on the ground in advance and the block is installed at a time by a tower crane. Specialized installing equipment :,s newly developed and applied to install the super-block. curtain wail. The curtain wall of the upper floor of the belt wall part is installed after the super-block. The installing equipment for this floor is developed utilizing a mini excavator and vacuum suctions. The application of this method had made it possible to omit the setting up the scaffold and financial profits such as the shortening of the terms of works was realized. The safety of works was secured and the productivity was also improved.