• Journal of Venture Innovation
• /
• v.5 no.3
• /
• pp.57-70
• /
• 2022

In modern industrial capitalism, the relationship between the provision of work and the receipt of wages has become an important principle governing society. According to the labor contract, the wages provided by entrusting the right to dispose of one's labor to the employer are directly compensated, and human life should be guaranteed and reproduced with proper rest. The establishment of labor relations under free contracts represents a problem in protecting workers, and accordingly, the maximum of working hours is set as a minimum right for workers, and the standard for minimum rest is set and assigned. The reduction of working hours is very important in terms of the quality of life of workers, but it is also an important issue in efficient corporate activities. As of 2020, Korea has 1,908 hours of annual working hours, the third lowest among OECD 37 countries in the happiness index surveyed by the Sustainable Development Solution Network(SDSN), an agency under the United Nations. Accordingly, the necessity of reducing working hours has been recognized, and the maximum working hours per week has been limited to 52 hours since 2018. In this situation, various working hours are legally excluded as a way to maintain the company's value-added creation and meet the diverse needs of workers, and Korea's Labor Standards Act restricts flexible working hours within three months, flexible working hours exceeding three months, selective working hours, and extended working hours. However, in the discussion on the application of the revised flexible working hours system in 2021 and the expansion of the settlement unit period recently discussed, there is a problem with the flexible working hours system, which needs to be improved. Therefore, this paper aims to examine the problems of the flexible working hours system and improvement measures. The flexible working hours system is a system that does not violate working hours even if the legal working hours are exceeded on a specific day or week according to a predetermined standard, and does not have to pay additional wages for excessive overtime work. It is mainly useful as a form of shift work in manufacturing, sales service, continuous business or electricity, gas, water, and transportation for long-term operations. It is also used as a way to shorten working hours, such as expanding holidays through short working days. However, if the settlement unit period is expanded, it is disadvantageous to workers as the additional wages that workers can receive will not be received. Therefore, First, in order to expand the settlement unit period currently under discussion, additional wages should be paid for the period expanded from the current standard. Second, it is necessary to improve the application of the flexible working hours system to individual workers to have sufficient consultation with individual workers in a written agreement with the worker representative, Third, clarify the allowable time for extended work during the settlement unit period, and Fourth, limit the daily working hours or apply to continuous rest. In addition, since the written agreement of the worker representative is an important issue in the application of the flexible working hours system, it is necessary to secure the representation of the worker representative.

• Korean Journal of Environment and Ecology
• /
• v.37 no.5
• /
• pp.347-366
• /
• 2023

In the present study, the vegetation was classified using the phytosociological method and canonical-correlation analysis (CCA) was implemented to analyze correlation between community structure and environmental factors in the natural habitats of forest byproducts, especially medicinal plants, such as Cudrania tricuspidata, Sorbus commixta, and Hovenia dulcis, in 2021-2022 to provide primary ecological data to establish environmental conditions for wild vegetable cultivation. A total of 11 plots in five regions, 8 plots in three regions, and 17 plots in 5 regions were selected for the natural habitats of C. tricuspidata in southern Korea, S. commixta in high mountains, and H. dulcis in valleys of central Korea, respectively. The importance value in each community was respectively analyzed as follows, in C. tricuspidata community, the importance value of C. tricuspidata (61.10) was the highest, followed by Celtis sinensis, Pinus thunbergii, Neolitsea aciculata, Styrax japonica, Carpinus coreana, Quercus serrata, and Q. acutissima. In Sorbus commixta community, Q. mongolica (57.21) was the highest, followed by, S. commixta (42.58), Betula ermani, Tilia amurensis, A. pseudosieboldianum, A. tschonoskii var. rubripes, Cornus controversa, Magnolia sieboldii, and Taxus cuspidata. In H. dulcis community, H. dulcis (64.58) was the highest, followed by Zelkova serrata, Cornus controversa, A. mono, Q. serrata, C. cordata, and Juglans mandshurica. As the result of the analysis on DBH of the major species having the high importance value, in C. tricuspidata community, C. tricuspidata, C. sinensis, Neolitsea aciculata, and C. coreana show the density of normal distribution, so the dominant status of these species is likely to continue. In S. commixta community, S. commixta show the density of reverse J-shaped curve, so the dominant status of these species is likely to be stable, and Q. mongolica, B. ermani and T. amurensis, show the density of normal distribution, so the dominant status of these species is likely to continue. In H. dulcis community, C. cordata, and J. mandshurica show the density of reverse J-shaped curve, so the dominant status of these species is likely to be stable, and H. dulcis, Z. serrata, C. controversa and A. mono had a formality distribution, suggesting a continuous domination of these species over the other species for the time being. The results of CCA ordination analysis using 11 environmental factors and 30 communities of three taxa classified by TWINSPAN analysis revealed that the altitude showed the strongest correlation with the vegetation. C. tricuspidata community was distributed on the moderate and gentle northeastern slope at low altitude with the highest pH, C.E.C, Ca²⁺, and Mg² and various P₂O₅, whereas S. commixta community was distributed on the steep slope at high altitude with the highest O.M and T-N and lower P₂O₅, Ca²⁺, Mg²⁺, C.E.C and pH, which is the opposite tendency of the environment of C. tricuspidata community. H. dulcis community was distributed on the gentle northern slope at lower altitude with an average pH, O.M, T-N, Ca²⁺, Mg²⁺, and C.E.C, except higher P₂O₅.

• Journal of Korean Society of Forest Science
• /
• v.20 no.1
• /
• pp.1-44
• /
• 1973

Needless to say, the management of national forest in all countries is very important in view of the national mission and management purposes. Korean national forest is also in particular significant in promoting national economy for the continuous increasing of the demand for wood, conservation of the land and social welfare. But there's no denying the fact that the leading aim of the Korean forest policy has been based upon the conservation of forest resources and recovery of land conservation function instead of improvement of the forest productive capacity. Therefore, the management of national forest should be aimed as an industry in the chain of the Korean national economy. And the increment of the forest productive capacity based on rationalized forest management is also urgently needed. Not only the increment of the timber production but also the establishment of the good forest in quality and quantity are to bring naturally many functions of conservation and other public benefits. In 1908 Korean national forest was historically established for the first time as a result of the notification for ownership, and was divided into two kinds in 1911-1924, such as indisposable national forest for land conservation, forest management, scientific research and public welfare, and the other national forest to be disposed. Indisposable forest is mostly under the jurisdiction of national forest stations (Chungbu, Tongbu, Nambu), and the tother national forests are under custody of respective cities and provinces, and under custody of the other government authorities. As of the end of 1971, national forest land is 19.5% (1,297,708 ha) of the total forest land area, but growing stock is 50.1% ($35,406,079m^3$) of the total forest growing stock, and timber production of national forest is 23.6% ($205,959m^3$) of the year production of total timber in Korea. Accordingly, it is the important fact that national forest occupies the major part of Korean forestry. The author positively affirms that success or failure of the management of national forest controls rise or fall of forestry in Korea. All functions of forest are very important, but among others the function of timber production is most important especially in Korea, that unavoidably imports a large quantity of foreign wood every year (in 1971 import of foreign wood-$3,756,000m^3$, 160,995,000 dollars). So, Korea urgently needs the improvement of forest productive capacity in national forest. But it is difficult that wood production meets the rapid increase of demand for wood to the development of economy, because production term of forestry is long, so national forest management should be rationalized by the effective investment and development of forestry techniques in the long view. Although Korean national forest business has many difficulties in the budget, techniques and the lack of labour due to outflow of rural village labour by development of national economy, and the increase of labour wages and administrative expenses etc. the development of national forest depends on adoption of the suitable forest techniques and management adapted for social and economical development. In this view point the writer has investigated and analyzed the status of the management of national forest in Korea to examine the irrational problems and suggest an improvement plan. The national forestry statistics cited in this study is based on the basic statistics and the statistics of the forest business as of the end of 1971 published by Office of Forestry, Republic of Korea, and the other depended on the data presented by the national forest stations. The writer wants to propose as follows (seemed to be helpful in improvement of Korean national forest management). 1) In the organization of national forest management, more national forest stations should be established to manage intensively, and the staff of working plan officials should be strengthened because of the importance of working plan. 2) By increasing the staff of protection officials, forest area assigned for each protection official should be decreased to 1,000-2,000 ha. 3) The frequent personnel changes of supervisor of national forest station(the responsible person on-the-spot) obstructs to accomplish the consistent management plan. 4) In the working plan drafting for national forest, basic investigations should be carefully practiced with sufficient expenditure and staff not to draft unreal working plan. 5) The area of working-unit should be decreased to less than 2,000 ha on the average for intensive management and the principle of a working-unit in a forest station should be realized as soon as possible. 6) Reforestation on open land should be completed in a short time with a debt of the special fund(a long term loan), and the land on which growing hardwood stands should be changed with conifers to increase productivity per unit area, and at the same time techical utilization method of hardwood should be developed. 7) Expenses of reforestation should be saved by mechanization and use of chemicals for reforestation and tree nursery operation providing against the lack of labour in future. 8) In forest protection, forest fire damage is enormous in comparison with foreign countries, accordingly prevention system and equipment should be improved, and also the minimum necessary budget should be counted up for establishment and manintenance of fire-lines. 9) Manufacture production should be enlarged to systematize protection, processing and circulation of forest business, and, by doing this, mich benefit is naturally given for rural people. 10) Establishment and arrangement of forest road networks and erosion control work are indispensable for the future development of national forest itself and local development. Therefore, these works should be promoted by the responsibility of general accounting instead of special accounting. 11) Mechanization of forest works should be realized for exploiting hinterlands to meet the demand for timber increased and for solving lack of labour, consequently it should promote import of forest machines, home production, training for operaters and careful adminitration. 12) Situation of labour in future will grow worse. Therefore, the countermeasure to maintain forest labourers and pay attention to public welfare facilities and works should be considered. 13) Although the condition of income and expenditure grows worse because of economical change, the regular expenditure should be fixed. So part of the surplus fund, as of the end of 1971, should be established for the fund, and used for enlarging reforestation and forest road networks(preceding investment in national forest).

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.3
• /
• pp.17-27
• /
• 2009

Price promotion typically reduces the price for a given quantity or increases the quantity available at the same price, thereby enhancing value and creating an economic incentive to purchase. It often is used to encourage product or service trial among nonusers of products or services. Thus, it is important to understand the effects of price promotions on quality perception made by consumer who do not have prior experience with the promoted brand. However, if consumers associate a price promotion itself with inferior brand quality, the promotion may not achieve the sales increase the economic incentives otherwise might have produced. More specifically, low qualitative perception through price promotion will undercut the economic and psychological incentives and reduce the likelihood of purchase. Thus, it is important for marketers to understand how price promotional informations about a brand have impact on consumer's unfavorable quality perception of the brand. Previous literatures on the effects of price promotions on quality perception reveal inconsistent explanations. Some focused on the unfavorable effect of price promotion on consumer's perception. But others showed that price promotions didn't raise unfavorable perception on the brand. Prior researches found these inconsistent results related to the timing of the price promotion's exposure and quality evaluation relative to trial. And, whether the consumer has been experienced with the product promotions in the past or not may moderate the effects. A few studies considered differences among product categories as fundamental factors. The purpose of this research is to investigate the effect of price promotional informations on consumer's unfavorable quality perception under the different conditions. The author controlled the timing of the promotional exposure and varied past promotional patterns and information presenting patterns. Unlike previous researches, the author examined the effects of price promotions setting limit to pretrial situation by controlling potentially moderating effects of prior personal experience with the brand. This manipulations enable to resolve possible controversies in relation to this issue. And this manipulation is meaningful for the work sector. Price promotion is not only used to target existing consumers but also to encourage product or service trial among nonusers of products or services. Thus, it is important for marketers to understand how price promotional informations about a brand have impact on consumer's unfavorable quality perception of the brand. If consumers associate a price promotion itself with inferior quality about unused brand, the promotion may not achieve the sales increase the economic incentives otherwise might have produced. In addition, if the price promotion ends, the consumer that have purchased that certain brand will likely to display sharply decreased repurchasing behavior. Through a literature review, hypothesis 1 was set as follows to investigate the adjustive effect of past price promotion on quality perception made by consumers; The influence that price promotion of unused brand have on quality perception made by consumers will be adjusted by past price promotion activity of the brand. In other words, a price promotion of an unused brand that have not done a price promotion in the past will have a unfavorable effect on quality perception made by consumer. Hypothesis 2-1 was set as follows : When an unused brand undertakes price promotion for the first time, the information presenting pattern of price promotion will have an effect on the consumer's attribution for the cause of the price promotion. Hypothesis 2-2 was set as follows : The more consumer dispositionally attribute the cause of price promotion, the more unfavorable the quality perception made by consumer will be. Through test 1, the subjects were given a brief explanation of the product and the brand before they were provided with a $2{\times}2$ factorial design that has 4 patterns of price promotion (presence or absence of past price promotion * presence or absence of current price promotion) and the explanation describing the price promotion pattern of each cell. Then the perceived quality of imaginary brand WAVEX was evaluated in the scale of 7. The reason tennis racket was chosen is because the selected product group must have had almost no past price promotions to eliminate the influence of average frequency of promotion on the value of price promotional information as Raghubir and Corfman (1999) pointed out. Test 2 was also carried out on students of the same management faculty of test 1 with tennis racket as the product group. As with test 1, subjects with average familiarity for the product group and low familiarity for the brand was selected. Each subjects were assigned to one of the two cells representing two different information presenting patterns of price promotion of WAVEX (case where the reason behind price promotion was provided/case where the reason behind price promotion was not provided). Subjects looked at each promotional information before evaluating the perceived quality of the brand WAVEX in the scale of 7. The effect of price promotion for unfamiliar pretrial brand on consumer's perceived quality was proved to be moderated with the presence or absence of past price promotion. The consistency with past promotional behavior is important variable that makes unfavorable effect on brand evaluations get worse. If the price promotion for the brand has never been carried out before, price promotion activity may have more unfavorable effects on consumer's quality perception. Second, when the price promotion of unfamiliar pretrial brand was executed for the first time, presenting method of informations has impact on consumer's attribution for the cause of firm's promotion. And the unfavorable effect of quality perception is higher when the consumer does dispositional attribution comparing with situational attribution. Unlike the previous studies where the main focus was the absence or presence of favorable or unfavorable motivation from situational/dispositional attribution, the focus of this study was exaus ing the fact that a situational attribution can be inferred even if the consumer employs a dispositional attribution on the price promotional behavior, if the company provides a persuasive reason. Such approach, in academic perspectih sis a large significance in that it explained the anchoring and adjng ch approcedures by applying it to a non-mathematical problem unlike the previous studies where it wis ionaly explained by applying it to a mathematical problem. In other wordn, there is a highrspedency tmatispositionally attribute other's behaviors according to the fuedach aal attribution errors and when this is applied to the situation of price promotions, we can infer that consumers are likely tmatispositionally attribute the company's price promotion behaviors. Ha ever, even ueder these circumstances, the company can adjng the consumer's anchoring tmareduce the po wibiliute thdispositional attribution. Furthermore, unlike majority of previous researches on short/long-term effects of price promotion that only considered the effect of price promotions on consumer's purchasing behaviors, this research measured the effect on perceived quality, one of man elements that affects the purchasing behavior of consumers. These results carry useful implications for the work sector. A guideline of effectively providing promotional informations for a new brand can be suggested through the outcomes of this research. If the brand is to avoid false implications such as inferior quality while implementing a price promotion strategy, it must provide a clear and acceptable reasons behind the promotion. Especially it is more important for the company with no past price promotion to provide a clear reason. An inconsistent behavior can be the cause of consumer's distrust and anxiety. This is also one of the most important factor of risk of endless price wars. Price promotions without prior notice can buy doubt from consumers not market share.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.247-269
• /
• 2007

In recent years, one of the major reasons for the fierce competition amongst firms is that they strive to increase their own market shares and customer acquisition rate in the same market with similar and apparently undifferentiated products in terms of quality and perceived benefit. Because of this change in recent marketing environment, the differentiated after-sales service and diversified promotion strategies have become more important to gain competitive advantage. Price promotion is the favorite strategy that most retailers use to achieve short-term sales increase, induce consumer's brand switch, in troduce new product into market, and so forth. However, if marketers apply or copy an identical price promotion strategy without considering the characteristic differences in product and consumer preference, it will cause serious problems because discounted price itself could make people skeptical about product quality, and the changes of perceived value might appear differently depending on other factors such as consumer involvement or brand attitude. Previous studies showed that price promotion would certainly increase sales, and the discounted price compared to regular price would enhance the consumer's perceived values. On the other hand, discounted price itself could make people depreciate or skeptical about product quality, and reduce the consumers' positivity bias because consumers might be unsure whether the current price promotion is the retailer's best price offer. Moreover, we cannot say that discounted price absolutely enhances the consumer's perceived values regardless of product category and purchase situations. That is, the factors that affect consumers' value perceptions and buying behavior are so diverse in reality that the results of studies on the same dependent variable come out differently depending on what variable was used or how experiment conditions were designed. Majority of previous researches on the effect of price-comparison advertising have used consumers' buying behavior as dependent variable. In order to figure out consumers' buying behavior theoretically, analysis of value perceptions which influence buying intentions is needed. In addition, they did not combined the independent variables such as brand loyalty and price discount rate together. For this reason, this paper tried to examine the moderating effect of brand loyalty on relationship between the different levels of discounting rate and buyers' value perception. And we provided with theoretical and managerial implications that marketers need to consider such variables as product attributes, brand loyalty, and consumer involvement at the same time, and then establish a differentiated pricing strategy case by case in order to enhance consumer's perceived values properl. Three research concepts were used in our study and each concept based on past researches was defined. The perceived acquisition value in this study was defined as the perceived net gains associated with the products or services acquired. That is, the perceived acquisition value of the product will be positively influenced by the benefits buyers believe they are getting by acquiring and using the product, and negatively influenced by the money given up to acquire the product. And the perceived transaction value was defined as the perception of psychological satisfaction or pleasure obtained from taking advantage of the financial terms of the price deal. Lastly, the brand loyalty was defined as favorable attitude towards a purchased product. Thus, a consumer loyal to a brand has an emotional attachment to the brand or firm. Repeat purchasers continue to buy the same brand even though they do not have an emotional attachment to it. We assumed that if the degree of brand loyalty is high, the perceived acquisition value and the perceived transaction value will increase when higher discount rate is provided. But we found that there are no significant differences in values between two different discount rates as a result of empirical analysis. It means that price reduction did not affect consumer's brand choice significantly because the perceived sacrifice decreased only a little, and customers are satisfied with product's benefits when brand loyalty is high. From the result, we confirmed that consumers with high degree of brand loyalty to a specific product are less sensitive to price change. Thus, using price promotion strategy to merely expect sale increase is not recommendable. Instead of discounting price, marketers need to strengthen consumers' brand loyalty and maintain the skimming strategy. On the contrary, when the degree of brand loyalty is low, the perceived acquisition value and the perceived transaction value decreased significantly when higher discount rate is provided. Generally brands that are considered inferior might be able to draw attention away from the quality of the product by making consumers focus more on the sacrifice component of price. But considering the fact that consumers with low degree of brand loyalty are known to be unsatisfied with product's benefits and have relatively negative brand attitude, bigger price reduction offered in experiment condition of this paper made consumers depreciate product's quality and benefit more and more, and consumer's psychological perceived sacrifice increased while perceived values decreased accordingly. We infer that, in the case of inferior brand, a drastic price-cut or frequent price promotion may increase consumers' uncertainty about overall components of product. Therefore, it appears that reinforcing the augmented product such as after-sale service, delivery and giving credit which is one of the levels consisting of product would be more effective in reality. This will be better rather than competing with product that holds high brand loyalty by reducing sale price. Although this study tried to examine the moderating effect of brand loyalty on relationship between the different levels of discounting rate and buyers' value perception, there are several limitations. This study was conducted in controlled conditions where the high involvement product and two different levels of discount rate were applied. Given the presence of low involvement product, when both pieces of information are available, it is likely that the results we have reported here may have been different. Thus, this research results explain only the specific situation. Second, the sample selected in this study was university students in their twenties, so we cannot say that the results are firmly effective to all generations. Future research that manipulates the level of discount along with the consumer involvement might lead to a more robust understanding of the effects various discount rate. And, we used a cellular phone as a product stimulus, so it would be very interesting to analyze the result when the product stimulus is an intangible product such as service. It could be also valuable to analyze whether the change of perceived value affects consumers' final buying behavior positively or negatively.

• Journal of the Korean Home Economics Association
• /
• v.19 no.3
• /
• pp.83-101
• /
• 1981

Under the full consideration of the growing need and importance of population education in the field of home economics in Korea, the study was carried out to verify and assess the following facts on the current issues of population education of home economists who are presently engaging in teaching professions as the teachers of middle and high school and professors of college and universities by setting its primary objectives of the study as followings; 1) to assess the degree of general knowledge and attitudes of home economists toward population education in the field of home economics, 2) to verify the problems encountered in implementing population education by home economists in its field, 3) to find an existing status of previous trainings received and other activities of population education of home economists aimed at utilizing these findings as a part of reference materials when the population education is conducted in the field of home economics. In order to attain these objectives described above, the questionnaire was carefully designed to house a total of 40 questions with good combination of multiple-choice and the simple answer questions. The mail questionnaire survey was conducted by establishing teachers of home economics at middle/high schools and college/universities as Senior Home Economists(SHE) who are from public, private liberal arts and vocational schools. The rate of response observed during the survey was 45.6 percent and the findings of the survey research are as follows: 1) Examining the status of the respondents by residence and religion, it was found that 45 percent of middle & high school teachers ar.d 59. 1 percent of college professors are residing in Seoul city area and that the largest percent of them are christian in their religion. Analyzing respondents by their ages, 56 percent of middle/high school teachers are in their 30s, 45 percent of college professors are in their 40s, and 37 percent of college teachers are in their 30s. In addition, 13 percent of the total respondents are found to be unmarried. The study also revealed that 71 percent of the college professors finished Master Degree course and 82 percent of middle/high school teachers are graduated from college level lasting 4 years. Looking over the status cf major fields of respondents, 68.4 percent of middle/high school teachers are specialized in home economic education and the college professors, on the other hand, show relatively even prortion by specializing in the order of food & nutrition science, clothes & textile science and home managerial science. As far as the length of teaching experience is concerned, a relatively longer period of teaching experience is observed in the college professors in comparison with that of middle/high school teachers. In other words, 33.3 percent of middle/high school teachers are experienced in teaching from 6 to 10 years on average while 43.9 percent of college professors show more than 16 years of experience. 2) Examining the status of existing number of children cf the respondents, one boy and one daughter pattern is predominant, showing 28.5 percent in middle/high school teachers and 21.1 percent in college professors. As for the desired number of children of unmarried respondents, it is observed that 43.8 percent of middle/high school teachers desire to have one boy and one girl, and 31.3 percent of college professors want to have one child regardless of the sex. By assessing the degree of awareness of the population education through their students, it is observed that 53 percent of middle/high school teachers and 50 percent of college professors are aware of population education in some extent and that a majority of respondents took the positive attitudes toward an inclusion of family planning components into the formal school education. Another noteworthy to observe is that a total of 84.8 percent out of middle/high school teachers pointed that the population education currently conducted at schools as a part of home economics are less sufficient than it should be. 3) Analyzing the tendency as to whether the respondents were experienced in receiving population education during the time when they were students, 75 percent of college professors and 59 percent of middle/high school teachers responded negative answers in the survey. In the mean time, a total of 50 percent of the respondents replied that they began to acknowledge the importance of population education mainly through the participation of some sort of population-education orientend seminars, experienced by 40 percent of college professors and 80 percent of middle/high school teachers. 4) What it calls attention in this study was to find that 96.5 percent of middle/high school teachers and 72 percent of college professors conduct population education to some extent during their lecture hours and that more than 80 percent of them are never experienced in teaching population and family planning contents in their regular classes. It is, on the other hand, found that no more than once was the response of those who believe themselves that they are experienced in teaching these relevant components to their students. Analyzing the contents of the subjects being taught in the class, a large percent of them are found to be consisted of population and family planning contents. According to this study, the current population education through the formal school is quite inactive. Analyzing the facts, 44.9 percent of the college professors responded that the population and family planning components are quite apart from their specialization which eventually generates lack of interest in the field. 5) It is also noticed through the study that the degree of frequency of commenting on population and family planning contents during the classes was depending significantly on their specializations which means that the degree of frequency varies from a major to another. Those who majored in home managerial science was the first one, as compared to others who majored in different specializations. Glancing over the status of correlations between ages of the respondents and numbers of seminar paticipation, it is quite clear that the aged group participated more than the younger group did, and that the most highest number of participations made by college professors were those who are in 50s. In addition, it is also found that those who are aged 20s and 60s of the respondents were the group who comments least on the contents of population and family planning at their classes. The suggestions and recommendation made through this survey research are as follows. 1) No one denies that the rapid increase of population, as compared to the limited size of land and resources, will certainly affect adversly to an enhancement of individual life quality which will, eventually, bring forth the poverty of the nation. This is the reasson why we are insisting that the world population be controlled up to an optimum level with a matter of global concerns. It is our understading that the primary aim for reducing number of population is believed to be attained only by conducting the systematic and comprehensive population education through the formal schools. Therefore, the role of home economists in the field of population/family planning education is considered very importment due to the fact that an ultimate goal of population education is placed in elevating the quality of family life by having optimum number of children through family planning program. 2) It is quite clear that home economists as teachers of formal school in all level are invited to pay their attention on redefining the ultimate goal of education and that of population education. We also understant that the primary objective of population education is to change the norm and value of the clients by replenishing the students with pertinent knowledge and attitudes on population and its related problems through a sort of education in order to attain the ultimate goal for enhancing the quality of life. There is no exception in the theory of home economics. An altimate goal of home economics is to elevate the general quality of life through an establishment of value existed in daily life. Considering the relations between population education and home economics, it is quite indespensable to bandle population components as an integral part in the field of home economics. We believe, therefore, that the senior home economists positive participation in the effort population control is more needed than it has been. 3) It is also strongly urged that population education should be a part of instructor training course for home economics. In other words, the teacher of home economics should be well aware of population and its problems by teaching interrelationship between population education and home economics, needs, contents and methods of population education during the instructor training courese for home economics. In addition, the senior home economists should be encouraged through positive participation on the short term training by types of domestic and international seminar, workshop, etc. 4) We certainly believe that the population education can not sustain itself without any backing-up of information and findings' of various and comprehensive researches of natural and social sciences. Accordingly, every senior home economist is invited to exert their maximum effort to conduct systematic study with an aim to utilize these findings and information at best in population education in the field of home economics. Therefore, we consider that the development of training material is imminent in order to provide effective and efficient population education through the for training of home economies. It should be noted that these training materials must be carefully designed, tailored and developed to meet the different classes of trainees under the considerations as to whether it is easily adaptable and infusable into the curricula of every field of home economics, and it is acceptable in the degree of difficulty and quality in its contents. 5) It is true that there are many domestic and international research rapers, reports and findings in the field of population education and family planning. However, there is a tendency that the most of research papers are heavily relying on the authors intension and preferences in its expression and publication. Under these circumstances, it is urged that the home economists should aware of the growing need of the technical training in order to keep these available information and research findings reprocessed and redesigned to insure the practical application into the population education in the field of home economics in Korea.

• Journal of Society of Preventive Korean Medicine
• /
• v.1 no.1
• /
• pp.149-165
• /
• 1997

In order that, investigating the feature of patients suffering arthritis, analysing its contents, and grasping a Primary factor affecting it, I might offerbasic datas which could help to plan and perform healthy affairs to thake precautions beforehand, I have investigated, analysed, and studied a total of 320 patients suffering arthritis, who have received physiotherapy in hospital located in Teaegu area for five months, from November 1 1995 to March 30 1996, of which summary and conclusion is this. 1. The general feature of patients in investigative objects In the distribution of the distinction of sex, men accounted for 26.9% and women, for 73.1%, and, in the fistribution of age, 60-year-old or more, most for 27.2% and from 20 to 29 years old, least for 14.0%. In the distinction of a vocation, housewives most accounted for 34.7% and students(jobless men), least for 19.3%. In the distinction of a matrimonial state, married persons most accounted for 76.7% and people living alone(divorce, separation by death, separation), least for 11.4%. In the distinction of an economic state, the middle classes most accounted for 73.5% and the upper classes, least for 2.9%. In the distinction of their academic careers, graduates of a primary school most accounted for 26.9% and graduates of university, for 14.1%, of which patients, having the ability to decode the national language, reached to 11.3%. In the distinction of the house form, people living in independent houses most accounted for 76.4% and residents in apartment(having an elevator), least for 9.4%. 2. In the distribution of the recurring state in the distinction of the feature, the recurring group was more than the group of patients falling that ill at first as 62.2% and in the distinction of the feature of the recurring group, the recurring group turned high in case of men being from 50s to 60s years old or more, people living alone (divorce, separation by death, separation), students (joblessmen), people working in farming, stockbeeding, forestry, fisheries, a simple labour, graduates of a primary school I having the ability to decode the national language, the upper classes, people part two years since they begined to suffer arthritis, people who had members having ever experienced arthritis among families. 3. In the distribution of arthritis on the distinction of bodily pars, a knee articulation most accounted for 50.2% and the articulation of fingers, for 8.8%, wile the simultaneous, several parts (multiple) accounted for 35.1%. In the distinction of the feature, arthritis of a knee turned high in case of men being from 20s to 30s years old, unmarried persons, people having academic careers of university, the middle classes, residents in apartment (having stairs). In the dictnction of a feature the case of several parts (multiple) turned high in case of women being from 50s to 60s years old or more, people living alone (divorce, separation by death, separation), people having the ability to decode th. national language, the graduates of a primary school, the upper classes, residents in apartment (having elevator). 4. In the distribution of arthritis on e distinction of a contracting term, two years or more most accounted for 51.6% and the case of contacting from one year to two years, for 15.3%. Analysing the distinction of the feature, the case of two years or more turned high in case of women being from 50s to 60s years old or more, people living alone (divorce separation by death, separation), the upper classes, people having the ability to decode the national language, residents in apartment (having elevator). 5. In the distribution of an treatment institution before patients came to help, their not curing most accounted for 39.1%, general, orthopedic, neurological surgery (physical therapy), for. 20.0%, and th. therapy of Chinese medicine (acupuncture, moxacautery, Chinese medicine), for 17.5%, and a pharmacy (medical therapy), for 13.4%. The case of patients not curing, in the distinction of a feature, turned high in case of men 20s years old, unmarried, the lower classes, people having academic careers of university, residents in apartment (having elevator). 6. In e distribution of the extent of satisfaction with treatment, common most accounted for 54.4% and some satisfaction, for 32.8%. The case of common, in the distinction of a feature, turned high, in case of men living alone from 50s to 60s years old (divorce, separation by death, separation), married persons, the upper classes, people having academic careers of university, residents in independent house, residents in apartment (having elevator), 7. In the distribution of the degree of knowledge of the cause of arthritis, patients knowing that the cause is to use very much a articulation in normal times most accounts for 60.1%, and patients knowing the state of short nutrition as a cause, for 2.5%. The case of patients knowing that the cause is to use very much in normal times, in the distinction of a feature, turned high in·case of ment being 20s and 60s years old or more, unmarried persons, e lower classes, people having the ability to decode. the national language, people having academic careers of university, residents in apartment (having stairs), 8. In the distribution of the state of physical exercise before arthritis contracted, patients exercising very much on the whole most accpimend for 40.3%, and patients not exercising, for 34.7%. The case of patients exercising very much on the whole, in the distinction of the feature, turned high in case of men being from 50s to 60s years old or more, people living alone(divorce, separation by death, separation), the lower classes, people having the ability to decode the national language, graduates of a primary school, residents in apartment (having elevator). 9. In the taste of patients suffering from arthritis, while the group of patients falling that ill at first and the recurring group didn't smoke cigarets, during alcohol and coffee on the whole, and the group of patients falling once again that ill drank a cup of distilled linquor and three cup of coffee or more on the whole per one day, and the group of patients falling that ill at first liked sort of vegetables and the recurring group liked very much sons of vegetables and fresh and meat in their loving food normal times. 10. Analysing the distribution on the dining table used by patients and the structure of a powder room, at first, in the structure of a powder room, the group of patients filling that ill have a toilet stool using as their sits, and a Bush toilet on the whole, and the recurring group, a toilet stool using as their sits and conventional type, and in the structure of a dinning table, the group of patients falling that ill at first and the recurring group turned high, each as 66.9% and 6.3%, who have a dining table carring here and there. 11. In the distribution of patients of arthritis in relation to stress, the case that they feeled severly symptoms of arthritis when thay got stress, turned high, each, as 78.6% in the recurring poop, and the case not knowing, as 61.5% in the first group. In the extent of stress normal times, the case that they got much stress on the whole turned high, each, as 72.4% in e recurring group, and the care that got less stress on the whole, as 60.0%. 12. In the distribution on the distinction of symptoms and impedimental extent, the recurring group turned high in each variable. Analysing the feature of the recurring group, in the distinction of symptoms, the case that they fooled much that the node of an articulation is stiff, turned high, as 71.6, and in the distinction of treatment before. patients came to helpk, the theraphy of Chinese medicine (physical theraphy), as 84.4%, the theraphy of Chinese medicine (acupuncture, moxacautery, Chinese medicine), as 73.2%, and in the distinction of the satisfing extent on treatment, the case of comman, as 72.3%, and in the cause of arthritis, the case not recruiting their health after a birth, as 68.5%, and the case not recovering wholely an articulation having got hurt, as 62.8%, and in the state of physical exercise before they begined suffering from arthritis, the case exercising very much on the whole, (as 74.2%), and in the extent of subjective impediment, the case of not being able to act almost, as 66.7%, the case of acting but feeling some hard, as 66.3%. 13. The correlation in variables in relation to arthritis Analysing realted variables, the recurring frequency showed correlation with such as the extent that patients got stress normal times, and the exercising state before suffering arthritis, and showed contra-correlation with academic careers, the wights, coffee. The cigaret, e loving food of taste, showed corralation with the weight, stature, alcohole as the loving food of taste. On the basis of this result medical members of heal, who are related to the regular education, public education or development of this program, should be concerned to prevent orthris.

• Journal of Biomedical Engineering Research
• /
• v.6 no.2
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.