• Journal of Korean Neurosurgical Society
• /
• v.30 no.11
• /
• pp.1271-1277
• /
• 2001

Objectives : Since vertebroplasty has been introduced, we performed short segment pedicle screw fixation with augmented intra-operative vertebroplasty in patients with unstable thoraco-lumbar fracture. Our intentions are to demonstrate the efficacy and indication of this new technique compare to conventional methods. Material and Methods : The surgery comprised of pedicle screw fixations on one level above and below the fracture site, and the fractured level itself, if pedicle is intact, and intra-operative vertebroplasty under the fluoroscopic guide with in-situ postero-lateral bone graft. Also, in cases of bone apposition, we removed those with small impactor through a transfascetal route. During the last 2 years, we performed in seven(7) unstable thoraco-lumbar fracture patients who consisted of two different characteristics, those four(4) with primary or secondary osteoporosis and three(3) of young and very healthy. All patients were followed clinically by A.S.I.A. score and radiography. Results : Mean follow up period was 14 months. We observed well decompressed state via transfascetal route in cases of bone fragments apposition and no hardware pullout in osteoporotic cases, no poly-methyl-methacrylate (PMMA) leakage through the fracture sites into the spinal canal, and no kyphotic deformities in both cases during follow-up periods. All patients demonstrated solid bony fusion except one following osteoporotic compression fracture on other sites. Conclusions : In the management of unstable thoraco-lumbar fracture, we believe that this short segment pedicle screw fixation with augmented intra-operative vertebroplasty reduce the total length or levels of pedicle screw fixation without post-operative kyphotic deformity.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.260-263
• /
• 2004

Short-bowel syndrome is functionally defined as a state of malabsorption following loss of small bowel, which comprises the sequelae of nutrient, fluid, and weight loss. The proximal segment of the bowel of a patient with intestinal atresia is usually grossly distended and atonic. In contrast, distal segment is smaller. For this reason, anastomosis of the proximal and the distal segment is technically difficult and may cause no propulsion even when they are anastomosed. We experienced that continuous drip ileostomy feeding with the secretions from the proximal stoma stimulated the distal bowel to accommodate and resolved many sequelae following loss of small bowel in a patient with short-bowel syndrome due to IIIa ileal atresia.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.367-371
• /
• 2006

Thermal properties of copolyetherester/silica nanocomposites were examined by using DSC and TGA. The segmented block copolyetheresters with various hard segment structures and hard segment contents (HSC) were synthesized and their silica nanocomposite films were prepared by solution casting method. The nano-sized fumed silica particles were found to act as a nucleating agent of the copolyetheresters. The nanocomposites always showed reduced degree of supercooling or faster crystallization than the corresponding copolyetheresters. The nanocomposites also showed increased hard segment crystallinity except HSC 35 sample which had short hard segment length. In case of 2GT [poly(ethylene terephthalate)] copolyetheresters, which were not developed commercially because of their low crystallization rate, the hard segment crystallinity increased considerably. The copolyetherester/silica nanocomposites showed better thermal stability than copolyetheresters.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.188-193
• /
• 2003

To predict changes in biomechanical parameters such as intradiscal pressure, and the shock absorbing mechanism in the spinal motion segment under different impact duration/loading rates, a three dimensional L3/L4 motion segment finite element model was modified to incorporate the poroelastic properties of the motion segment. The results were analyzed under variable impact duration for normal and degenerated discs. For short impact duration and a given maximum compressive force, relatively high cancellous pore pressure was generated as compared with a case of long impact duration, although the amount of impulse was increased. In contrast relatively constant pore pressure was generated in the nucleus. Disc degeneration increased pore pressure in the disc and decreased pore pressure in the cancellous core, which is more vulnerable to compressive fracture compared with intact case.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.695-702
• /
• 2015

Recently, the improvement of mechanical and theoretical issues in geo-centrifuge test enhances the applicability and accuracy of the test. Geo-centrifuge test is appropriate to simulate the behaviors of underground structures like tunnel, since tunnel interacts with the soil and/or rock around it and the test can embody the in-situ stress conditions effectively. In this study, the seismic behaviors of twin tunnel were analyzed based on geo-centrifuge test. Flexible segment to mitigate seismic acceleration were implemented in the model with thin and thick thickness. Based on the test results, it was found that flexible segment can decrease the peak acceleration generally, however, thin flexible segment was not able to reduce peak acceleration in short-period seismic wave. Thick flexible segment was more effective in case of high bedrock acceleration condition. Additionally, 3-dimensional numerical analysis was performed to verify the characteristics of seismic behavior and the effect of flexible segment. Consequently, the numerical analysis result showed good agreement with the test result.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.12-13
• /
• 2013

Free-form building is increasing because of request that an order to raise the value and request of the local residents and the government trying to own iconic and beautiful buildings. In addition, the installation and production of free-form concrete segment are now available because of development of construction technology, such as the development of materials and equipment. However, the production of free-form concrete segment requires a lot of time and manpower than shaping. In particular, resources of the mold for the production of free-from segment will be invested excessively because mold can not be recycled. Thus, the problems of increased costs, construction periods and loss of productivity occur. To solve these problems, this study proposes a technique of making the mold of for variable within a short time. Technique proposed in this study can be recycled die and will realize fast and accurate free-form concrete segment.

• Journal of Species Research
• /
• v.10 no.3
• /
• pp.287-300
• /
• 2021

Three new species of Myzomolgus are described as associates of sipunculans from a tidal flat in Phuket, Thailand. As diagnostic features, Myzomolgus leptocercosus n. sp. has elongate caudal rami which are 10.7 times longer than wide, 5 setae and a conical process on the first antennular segment, an armature formula 1, 0, 1+sucker, and 6 of antenna, and an inner coxal seta on all swimming legs. Myzomolgus spatulatus n. sp. lacks a rostrum, but bears 4 setae and a spatulate process on the first antennular segment, an armature formula 0, 0, 2+sucker, and 6 of the antenna, the inner coxal seta on legs 1-3, and 5 armture elements on the third endopodal segment of legs 1-3. Myzomolgus cucullatus n. sp. has short caudal rami which are 1.60 times longer than wide, a broad, hood-like tergite of fouth pedigerous somite, 4 setae only on the first antennular segment, the armature formula 0. 0. 2+sucker, and 6 of the antenna, and no iiner coxal seta on the swimming legs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2235-2245
• /
• 2000

The necessity of using rapid prototyping(RP) for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy, materials, aid cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed. For the new hybrid RP process to maintain the same degree of process automation as in currently available processes like SLA or FDNI, a sophisticated process planning system is developed. In the process planner, CAD models(STEP AP203) are partitioned into 3D manufacturable volumes called 'Ueposition feature segment"(DFS) after machining features called "machining feature segmenf'(MFS) are extracted from the initial CAD model. Once MFS and DFS are identified, the process planner arranges them into a chain of processes and automatically generates machining information for each DFS and MFS. The goal of this paper is to present a framework for a process planning system for hybrid RP processes and to outline the geometric algorithms involved in developing such an environment.

• Animal cells and systems
• /
• v.14 no.4
• /
• pp.351-360
• /
• 2010

A new species of the Cletopsyllidae belonging to the genus Isocletopsyllus Huys and Lee, 1999 is described from the materials collected from subtidal sandy bottoms at Jeju Island and Ulleung Island, Korea. So far, only two species of the genus Isocletopsyllus, viz. I. tertius (Por, 1964) from Israel and I. quartus (Soyer, 1966) from Banyuls-sur-Mer (France) are recorded, both from the Mediterranean Ocean. The new species can be clearly distinguished from its congeners by the combination of the following characters: (1) female antennule with a large process on the outer margin of first segment, (2) caudal rami with a bulbous proximal inner expansion, and shorter than those of other species (about four times long as wide in the new species), (3) second segment of P1 exopod with a short rod-like inner seta, (4) sexual dimorphism presented in the second endopodal segment of male P2, not in exopod of P4, and (6) female P5 with a very long exopod with very short second outer seta. A table comparing the modifications of swimming legs in the family Cletopsyllidae Huys and Lee, 1999 is presented. This is the first record of this family from Korea.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.9-16
• /
• 2007

The purpose of this study was to analyze the effects of after aquatic exercise on gait in the Falls Experienced elderly. There were one group : Fall Experienced Elderly Women(n=8). They were tested on their gait (Elapse time of each phase, Stance time of limb, Stride length, Velocity of segment). we took video and analyzed their movement using Ariel Performance Analysis System and compared gait parameters. For data analysis, mean and standard deviation scores were calculated, and correspondence sample t-test and pearson's correlation analysis were used. First, after exercise is short than before exercise on Elapse time of each phase, fall-experience subjects showed meaningful total time. Second, after exercise is short than before exercise on Stance time of limb and Stride length, fall-experience subjects showed meaningful Stride length. Third, after exercise is fast than before exercise on Velocity of segment.