• Title/Summary/Keyword: Short-cut method

Search Result 104, Processing Time 0.034 seconds

A Study on the Correction of Protection Relay of Temporary Electric Power Installations for Storage Tank (저장 탱크용 임시전력설비의 보호계전기 정정에 관한 연구)

  • Son, Seok-Geum
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.13 no.6
    • /
    • pp.562-567
    • /
    • 2020
  • In this paper, this is a study on the correction of protection relays to monitor temporary power facilities for storage tanks especially transformers to block and protect faults such as insulation breakdown. When an abnormality such as a short circuit or a ground fault occurs in the power system, it is important to detect this quickly cut off the device and equipment in which the fault occurred and separate it from the power system to correct the protection relay so that it does not interfere with power supply. In addition the fault current calculation that accurately applies the fault type and the cause of the fault for protection cooperation will be the most important factor in the correction of the protection relay. For protection coordination a study was conducted on the method of coordination for protection of power facility protection for storage tanks such as over current relay, ground over current relay, under voltage relay, and ground over voltage relay applied to temporary.

The formative characteristics and wearing pattern of front-bloused-type skirts from 15th to 16th century (15-16세기 전단후장형(前短後長形) 치마의 조형적 특징과 착용양상)

  • Kim, Eun Jung;Lee, Ho Jung;Cho, Woo Hyun
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.22 no.4
    • /
    • pp.1-16
    • /
    • 2020
  • This study focused on front-blouse-type skirts from the 15th and 16th centuries and aimed to investigate their formative characteristics and wearing patterns. Previous studies, literature, records, paintings, and excavated clothing items were used as research materials. The researcher categorized front-blouse-type skirts into three types based on the construction method. The first has the front-center portion of the skirt folded up, the second has the center portion cut short, and the third has horizontal dart pleats on either side. An examination of 48 items from 18 excavation sites of front-blouse-type skirts showed that only the front-center portion folded up type appeared in the 15th century, and it was only in the 16th century that the other forms of skirts were worn. Finally, based on the analysis, the pattern of wearing front-blouse-type skirts and their changing factors was deduced. Front-blouse-type skirts were identified as ceremonial skirts that were popular in the 15th and 16th centuries among the types of long skirts available. The popularity and usage of this type of skirt began to spread gradually in the 15th century. In the 16th century, various types of front-blouse-type skirts were brought into vogue by the royal family and the external register. It can be inferred that the popularity of front-blouse-type skirts gradually declined in the 17th century as other types of long skirts, folding skirts, and Sran type skirts emerged.

CLINICAL ANALYSIS OF GONIAL ANGLE CHANGE AFTER ORTHOGNATHIC SUGERY IN PATIENTS WITH THE MANDIBULAR PROGNATHISM (하악전돌증환자의 악교정수술후 하악각변화에 관한 임상적 분석)

  • Kwon, Yeong-Ho;Jang, Hyun-Jung;Lee, Sang-Han
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.22 no.2
    • /
    • pp.206-216
    • /
    • 2000
  • Predictional study for lateral change between pre- and post-orthognathic surgery has been emphasized mainly on anterior area of lateral profile; upper lip, lower lip and chin et al. So interest for lateral profile change has been less in posterior area of lateral profile and literature analyzing gonial angle change is rare. The purpose of this study is to make prediction for gonial angle change possible and to offer somewhat treatment guidance for gonial angle to be improved by investigating overall gonial angle change between pre- and post-orthognathic surgery and inquiring into factors influencing on pattern of genial angle change. For this study 35 patients were selected retrospectively. Lateral cephalometric radiographs were taken in just pre-op time, pod 1 day, pod 1 year. They were analyzed and genial angles were measured. The results were as follows : 1. Gonial angle at pod 1 day was decreased about $9.3^{\circ}$ than pre-op and gonial angle at pod 1 year was increased about $4.0^{\circ}$ than pod 1 day. So genial angle at pod 1 year was decreased about $5.3^{\circ}$ than pre-op genial angle(p<0.01). 2. Mean pre-op gonial angle was $129.4^{\circ}$, showing significantly high value than normal and mean gonial angle at pod 1 year was $124.1^{\circ}$, showing value near to normal. 3. Mean gonial angle change between pre-op and pod 1 year was decreased about $5.4^{\circ}$ in female and $5.3^{\circ}$ in male. There was no statistically significant difference between male and female(p>0.05). 4. Principal factor influencing on decreased gonial angle in gonial angle change between pre-op and pod 1 year was amount of mandibular setback. 5. Principal factor influencing on increased gonial angle in gonial angle change between pod 1 day and pod 1 year was % horizontal relapse, and it was thought that resorption and bone remodelling on posterior area in mandibular distal segment also were related to increased gonial angle. 6. It is thought that sagittal split ramus osteotomy in mandibular prognathic patients with high value of gonial angle is effective to improvement of gonial angle, and In patients who have normal range of gonial angle and are required with excessive mandibular setback, short lingual cut method, additional resection of posterior margin of distal segment, Obwegeser II method will be considerd. 7. More prudent operation and careful post-op management will be responsible for maintenance of postoperative stable gonial angle.

  • PDF

Millimeter-wave Broadband Amplifier integrating Shunt Peaking Technology with Cascode Configuration (Cascode 구조에 Shunt Peaking 기술을 접목시킨 밀리미터파 광대역 Amplifier)

  • Kwon, Hyuk-Ja;An, Dan;Lee, Mun-Kyo;Lee, Sang-Jin;Moon, Sung-Woon;Baek, Tae-Jong;Park, Hyun-Chang;Rhee, Jin-Koo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.10 s.352
    • /
    • pp.90-97
    • /
    • 2006
  • We report our research work on the millimeter-wave broadband amplifier integrating the shunt peaking technology with the cascode configuration. The millimeter-wave broadband cascode amplifier on MIMIC technology was designed and fabricated using $0.1{\mu}m\;{\Gamma}-gate$ GaAs PHEMT, CPW, and passive library. The fabricated PHEMT has shown a transconductance of 346.3 mS/mm, a current gain cut off frequency ($f_T$) of 113 GHz, and a maximum oscillation frequency ($f_{max}$) of 180 GHz. To prevent oscillation of designed cascode amplifier, a parallel resistor and capacitor were connected to drain of common-gate device. For expansion of the bandwidth and flatness of the gain, we inserted the short stub into bias circuits and the compensation transmission line between common-source device and common-gate device, and then their lengths were optimized. Also, the input and output stages were designed using the matching method to obtain the broadband characteristic. From the measurement, we could confirm to extend bandwidth and flat gain by integrating the shunt peaking technology with the cascode configuration. The cascode amplifier shows the broadband characteristic from 19 GHz to 53.5 GHz. Also, the average gain of this amplifier is about 6.5 dB over the bandwidth.

Estimating North Korea's GNP by Physical Indicators Approach (실물지표(實物指標)에 의한 북한(北韓)의 GNP 추정(推定))

  • Chun, Hong-tack
    • KDI Journal of Economic Policy
    • /
    • v.14 no.1
    • /
    • pp.167-189
    • /
    • 1992
  • The most difficult problem one faces in estimating North Korea's GNP is the lack of basic national income data. In addition, there is no appropriate foreign exchange rate available to convert North Korea's GNP to dollar values. The physical indicators method is particularly useful in estimating North Korean GNP because it requires only a modest amount of data and obtains dollar GNP directly by applying a relationship between physical indicators and GNP, which is estimated from reference countries, to physical indicators of North Korea. The estimated result of North Korean GNP in 1990 is 27.1 billion dollars and per capita GNP 1,268 dollars. The trade participation ratio (Trade/GNP) implied by the GNP estimate was plausible and so was the ratio of fiscal expenditure to GNP. This paper examined the physical indicators method's logic, the quality of the North Korean data that was used in the estimation, and the plausibility of estimation result. Relatively simple data requirement, comparative ease of computation and plausible estimation results suggest that use of physical indicators method could enhance the reliability of North Korean GNP estimate.

  • PDF

Study on Pile Cloth Rugs Produced after the Late Joseon Period (조선 말기 이후 첨모직 깔개에 관한 연구)

  • Park, Yoon-Mee;Oh, Joon Suk
    • Korean Journal of Heritage: History & Science
    • /
    • v.51 no.4
    • /
    • pp.84-107
    • /
    • 2018
  • Cheommojik is a pile cloth, a type of textile whose surface is covered with short piles. The term chaedam was used during the late Joseon dynasty to refer to pile cloth rugs, while the terms yoongjeon, dantong and yangtanja were used in the early twentieth century. Various documents, newspaper articles and photographs confirm that pile cloth rugs were used by the general public as well as the royal family from the late Joseon dynasty onward, and that there were domestic manufacturers of such rugs at that time. This study investigated six pile cloth rugs that were produced after the late Joseon dynasty, five of which feature Persian knots made of cut pile, the other being made with the loop pile method. The cut pile rugs are rectangular in shape and measure between 72-98cm by 150-156cm; and they are decorated in the middle with patterns of butterfly, deer, and tiger or the ten longevity symbols, and along the edges with patterns composed of 卍 symbols. The ground warp of all six rugs are made from cotton yarn, while the ground weft is made of cotton yarn on three pieces, wool on one piece and cotton and viscose rayon. The ground weft yarn from four pieces are Z-twist yarn made with two or more S-twist cotton yarn. Four to six colors were used for the pile weft, all being natural colors except for red. Two or more S- or Z-twist yarn were twisted together in the opposite twist for the pile weft, with the thickness determining the number of threads used. Six or more weft threads were used to make the start and end points of the rug; and the ground warp ends were arranged by tying every four of them together. For the left and right edges, three or more threads were wrapped together into a round stick-like form, and the second and third inner ground warps from the edges were stitched on to the wrapped edge. For the loop pile, loops were made in the direction of the warp; the ground warp and the ground weft may have been made with cotton, the pile warp with wool yarn. An analysis of the components of three rugs was conducted to determine which types of animal hair were used for the pile weft. Despite some inconclusive results, it was revealed that goat hair and fat-tailed sheep hair were used, raising the possibility that various kinds of animal fur were used in the production of pile cloth rugs. The six rugs examined in this study are estimated to have been made between the late 1800s and the early 1900s. Although the manufacturer of the rugs cannot be confirmed, we concluded that the rugs were produced in Korea after referring to the documentation of the domestic production of pile cloth rugs during the aforementioned period and the form and placements of the patterns on the rugs.

THE EFFECT OF SANDWICH TECHNIQUE USING FLOWABLE COMPOSITE RESIN BASE ON THE MICROLEAKAGEIN CLASS II CAVITIES OF MOLAR (구치부 제2급 와동에서 고흐름성 복합레진을 이용한 적층 충전술식의 미세누출에 미치는 영향)

  • Lee, Kang;Hong, Chan-Ui
    • Restorative Dentistry and Endodontics
    • /
    • v.27 no.5
    • /
    • pp.502-514
    • /
    • 2002
  • The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

A Comparison of Surgical Methods of Inducing Femoral Head Osteonecrosis in Rats (랫드에서 대퇴골머리 골괴사 유발 외과적 방법의 비교)

  • Kim, Jun-Soo;Park, Jin-Uk;Choi, Seok-Hwa;Kim, Gon-Hyung
    • Journal of Veterinary Clinics
    • /
    • v.27 no.3
    • /
    • pp.240-245
    • /
    • 2010
  • Osteonecrosis of the femoral head is an idiopathic and progressive disease. It was reported that several animal models have been used for the research of osteonecrosis. However, no standardized animal model for the study of osteonecrosis has been developed to date. This study was conducted to compare the degree of osteonecrosis of three surgically induced osteonecrosis models in rats. Twenty Sprague-Dawley rats (24 weeks old, male) were divided into three experimental groups and a control group, five heads each. Three groups were surgically induced into osteonecrosis; the ligamentum teres were cut and the periosteum of the femoral neck was stripped (Group S), the steel wire was ligated to the neck of the femoral head (Group W), and the femoral neck was tied up with a wire in the same way as in the W group, and burned by attaching the electrode tip to the wire and then the wire was removed (Group B). After two weeks, rats were sacrificed and the femoral head and neck were collected. Histological findings were evaluated with H/E stains, Safranin-O and TUNEL for osteonecrotic lesions in the bones and cartilages of the femoral head. Osteonecrosis was induced successfully in all groups (Group S, W and B) in two weeks, a short period of time. Significant necrotic changes of the cartilage were detected only in Group B. In the modified cautery model in particular, the method of removing the wire after cautery was completed in the experimental model of osteonecrosis more efficiently than any other method.

A Study on the Determinant Factor Analysis for the Characterization of Saemangeum New Port (새만금신항만 특화에 관한 결정요인 분석에 관한 연구)

  • Kim, Nam-Suk;Choe, Do-Won;Jeon, Young-Hwan
    • Journal of Korea Port Economic Association
    • /
    • v.28 no.1
    • /
    • pp.263-288
    • /
    • 2012
  • This study aims to define which factors will contribute to vitalization of Saemangeum New Port to secure international competitiveness in order to attract international shipping companies, shippers and forwarders in constructing Saemangeum New Port, and to propose subsequent implications. For research methods of the current study, a factor analysis and a decision making method of analytic hierarchy process(AHP) were used. Through precedent studies, total 11 measuring variables were selected including short entrance and exit channels, main infrastructure development project, tax cut and deregulation, and through a factor analysis, total 3 high rank evaluation factors including 'location and facilities', 'surrounding infrastructure and hydrophile property', and 'local policy and environment'. Analysis results summarizing a test of reliability of measuring variables in this study indicate that as Cronbach alpha coefficient of total 11 measuring variables were turned out to be over 0.8, it is surpassing general average 0.6, which means there is reliability.

A Systematic Approach to Port related Problems An Analysis on the Actual Condition of physical Distribution System of Pusan port (항만관련문제의 시스템적 고찰 부산항 물류시스템의 실태분석)

  • Lee Cheol-Yeong;Moon Seong-Hyeok
    • Journal of Korean Port Research
    • /
    • v.2 no.1
    • /
    • pp.7-28
    • /
    • 1988
  • From the viewpoint of physical distribution, the port transport process can be regarded as a system which consists of various subsystems such as navigational aids, quay handling, transfer, storage, information If management, and co-ordination with inland transport. The handling productivity of this system is determined by the production level of the least productive subsystem. So, a productivity analysis on the flow of cargoes through each subsystem should be made in order to achieve efficient port operation. The purpose of this paper is to analyze the productivity of each subsystem in Pusan port, and to bring forward problems and finally to draw up plans for their betterment. Analyzed results on the productivity of each subsystem are as follows, i) It is known that the number of tugs with low HP should be increased by a few, the number of tugs with medium HP is appropriate, and the number of tugs with high HP is in excess of that necessary. ii ) In the case of container cargoes, it is found that the transfer and storage systems in BCTOC have the lowest handling capability, with a rate of $115\%$, leading to bottle-necks in the port transport system, while the handling rate of the storage and quay handling systems in general piers is in excess of the inherent capability. iii) In the case of the principal seaborne cargoes passing through general piers, there is found to be a remarkable bottle-neck in the storage system. In the light of these findings, both the extension of storage capability and the extension of handling productivity are urgently required to meet the needs of port users. Therefore, iv) As a short-term plan, it is proposed that many measures such as the reduction of free time, the efficient application of ODCY, etc must be brought in and v) In the long-trun, even though the handling capability will accommodate an additional 960,000 TEU in 1991, the scheduled completion date of the third development plan of Pusan port, insufficiency of handling facilities in the container terminal is still expected and concrete countermeasures will ultimately have to be taken for the port's harmonious operation. In particular, the problem of co-ordination with inland transport and urban traffic should be seriously examined together in the establishment of the Pusan port development. As a method of solving this, vi) It is suggested that Pusan port (North port) should be converted into an exclusive container ternimal and overall distribution systems to the other ports for treating general cargoes must be established. vii) And finally, it is also proposed that the arrival time (cut-off time) of influx cargoes for exports such as general merchandise and steel product should be limited, with a view to securing cargoes suitable for the operational capability of BCTOC.

  • PDF