• 한국가스학회지
• /
• 제9권2호
• /
• pp.22-27
• /
• 2005

본 연구에서는 LNG로부터 냉열을 활용하여 $^{13}CH_4$과 $^{12}CH_4$을 분리하는 초저온 증류 공정에 대한 전산 모사를 분석한 것이다. 사용한 전산 모사 프로그램은 short-cut 방법으로 사용되는 Smoker식과 FUG(Fenske-Underwood-Gilliland) 방법 두가지를 활용하여 실시하였다. 일반적으로 탄소 동위원소 분리에 대한 기술은 많은 방법들이 연구중에 있으며, 특히 초저온 증류 공정에 의한 분리는 많은 장점으로 인해 상업적으로 활용되고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.249-254
• /
• 1998

This paper describes the control methods to cut out the NFB(No Fuse Breaker) of shorted load in the auxiliary power supply, Generally, when the short-circuit occurs in the load of the auxiliary power supply, the auxiliary power supply stops the operation according to the protection sequence. Finally, the other auxiliary power supply stops the operation by the same fault, To resolve this problem, we suggest the control method to trip the NFB of shorted load. That is, when the short circuit occurs, the controller changes control mode from voltage mode to current mode without the operation of output contactor(SIVK) in the auxiliary power supply. The auxiliary power supply provides a large current for the short-circuit load. After some time, the NFB of the short-circuit load is cut off and the auxiliary power supply Provides stable voltage for the loads except for the short-circuit load.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.65-73
• /
• 2004

이동 IP 망에서 이동 IP의 삼각 라우팅 문제를 해결한 최적경로 IP 라우팅 기법은 이동 IPv6망에서의 이동성을 지원하는 기본 동작으로 되어있다. 본 논문에서는 이동 IP망의 최적 경로 기법을 ATM망에서의 NHRP를 이용한 단거리 터널설정 기법을 적용하여 그 성능을 평가하였다. 종단간 패킷 전달지연 시간 측면에서 기존 IP 라우팅 기법과 최적경로에서의 단거리 터널링 기법을 상호 비교하기 위하여 수학적 분석 및 모의실험을 수행하였다. 최적 경로의 단거리 터널링 기법은 기존 IP 라우팅 방식보다 초기 데이터의 경우 종단간 전달 지연시간이 클 수 있으나 이후 패킷부터는 종단간 데이터 전달 지연시간이 대폭 개선됨을 확인하였다.

• 패션비즈니스
• /
• 제5권3호
• /
• pp.73-84
• /
• 2001

The purpose of this study is to apply fundamental data of impression formation research by analysing and observing the various facial image that can be effected from hair style as well as be helpful for choosing suitable hair style for T.P.O in modern society. This study targeted 305 college women in Daegu and Gyung-book area. Hair Style Image Scale(HSIS)was used the scale of seven point modified the S-D(Semantic Differential) method. The analysis of impression formation effect of hair style using SPSS WIN package have completed from the principal component analysis by Varimax perpendicular rotation method and ANOVA was used to recognize the difference in impression formation according to hair style change. In the case of statistical difference was appeared, LSD post-verification was applied for that. The conclusions of this study is as followed ; 1. The factors of impression formation effected by hair style were classified as goodwill factor, refinement factor, elegance factor and individuality factor. 2. In terms of goodwill factor, long hair style showed highest level and short cut hair, bobbed hair in an order. In refinement factor, there was no difference between short cut hair and bobbed hair and both of them was higher than long hair. In elegance factor, long hair was highest and bobbed hair was lowest. In individuality factor, short cut hair and bobbed hair higher than long hair and no difference between short cut hair and bobbed hair.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1522-1529
• /
• 2009

When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권6호
• /
• pp.307-315
• /
• 2003

This paper proposes a novel simulation method of WPGS (Wind Power Generation System). The rotation speed control method of turbine under variable wind speed using the pitch control is proposed. Moreover, when wind speed exceeds the cut-out wind speed, the turbine will be stopped by controlling pitch angle to 90$^{\circ}$, otherwise it will be controlled to steady-state operation. For the purpose of effective simulation, the SWRW (Simulation method for WPGS using Real Weather condition) is used for the utility interactive WPGS simulation in this paper, in which those of three topics for the WPGS simulation: user-friendly method, applicability to grid-connection and the utilization of the real weather conditions, are satisfied. It is impossible to consider the real weather conditions in the WPGS simulation using the EMTP type of simulators and PSPICE, etc. External parameter of the real weather conditions is necessary to ensure the simulation accuracy. The simulation of the WPGS using the real weather conditions including components modeling of wind turbine system is achieved by introducing the interface method of a non-linear external parameter and FORTRAN using PSCAD/EMTDC in this paper. The simulation of long-term, short-term, over cut-out and under cut-out wind speeds will be peformed by the proposed simulation method effectively. The efficiency of wind power generator, power converter and flow of energy are analyzed by wind speed of the long-term simulation. The generator output and current supplied into utility can be obtained by the short-term simulation. Finally, transient-state of the WPGS can be analyzed by the simulation results of over cut-out and under cut-out wind speeds, respectively.

• ALGAE
• /
• 제36권4호
• /
• pp.327-332
• /
• 2021

Raw material of gelidioid red algae yielding high-quality agar has been in short supply due to overharvesting, but in situ farming of gelidioids has not been practical due to their slow growth. To produce vegetative seedstock of a cosmopolitan species, Pterocladiella capillacea, we investigated the number and length of regenerated branches arising from sectioned fragments during 3 weeks of laboratory culture at 10, 15, 20, and 25℃. All sectioned fragments formed axis-like branches mostly from the upper cut edge and stolon-like branches mostly from the lower cut edge, showing a high capacity of regeneration and intrinsic bipolarity. At 20℃, the number of regenerated branches increased to 2.74 ± 1.29 on the upper cut edge and 4.26 ± 2.66 on the lower cut edge. Our study reveals that the use of fragments bearing regenerated branches as seedstock can be a simple method to initiate fast propagation for mass cultivation in the sea or outdoor tank.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.120-131
• /
• 2007

A comprehensive short channel analytical model has been proposed for High Electron Mobility Transistor (HEMT) to obtain higher cut-off frequency maintaining the reliability of the device. The model has been proposed to consider generalized doping variation in the directions perpendicular to and along the channel. The effect of field plates and different gate-insulator geometry (T-gate, etc) have been considered by dividing the area between gate and the high band gap semiconductor into different regions along the channel having different insulator and metal combinations of different thicknesses and work function with the possibility that metal is in direct contact with the high band gap semiconductor. The variation obtained by gate-insulator geometry and field plates in the field and channel potential can be produced by varying doping concentration, metal work-function and gate-stack structures along the channel. The results so obtained for normal device structure have been compared with previous proposed model and numerical method (finite difference method) to prove the validity of the model.

• 한국환경농학회지
• /
• 제17권4호
• /
• pp.358-361
• /
• 1998

본 연구는 암반절개사면 녹화용 붉나무(Rhus chinensis Mill), 쉬나무(Euodia daniellii Hemsley), 담쟁이 덩굴(Parthenocissus tricuspidata Sieb. et Zucc, Planch)강건묘목을 단기기간에 육성하는 방법을 개발하기 위하여 수행되었다. 묘목은 1993년 12월 8일부터 1994년 6월 17일동안에 첫 4개월은 온실에서, 그후 2개월은 야외포장에서 비닐망으로 만들어진 수세미 모양의 화분에서 피트모스, 질석, 진흙, 퇴비, 복합비료, 흡습제(40:25:19:1:0.1)의 배양토로 육묘되었다. 육묘과정의 마지막 3개월동안 $4{\sim}10$일 간격으로 반복된 건조-관수처리에 의하여 강건묘목으로 육성시켰다. 강건묘목은 경화처리전보다 수분포텐션이 낮아지고, 삼투압은 높아지고, T/R율은 낮아졌다. 강건묘목은 암반절개사면의 요철부 배양토에서 좋은 생존율과 생장율을 나타냈다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제13권1호
• /
• pp.45-50
• /
• 2006

Papers were prepared from cut cocoons and mulberry branches, which are byproducts from sericulture industry. The long filament of silk should be cut into appropriate length in order to prepare paper and this was achieved by chemical method. By a mixture of sodium hydroxide and sodium carbonate solution, the silk filaments were cut into short fibers (less than 1 mm in length). Since the short silk fibers (sSf) could not bind each other by itself, starch and poly(ethylene oxide)(PEO) were added as a bonding agent. When starch and PEO were used in a ratio of 3:7, the silk papers had optimum mechanical properties for paper. Fibers from the skin of mulberry branches (MBF) were added to sSf to enhance the mechanical properties of pure silk paper. Bleaching of MBF was performed with a mixture of hydrogen peroxide and sodium silicate. The mechanical properties were greatly enhanced and the optimum blend ratio of MBF and sSf were 7:3. The mulberry/silk paper has good absorption property against formaldehyde, and therefore, the paper could be applied as a wall paper for preventing the sick house syndrome.