• 한국재료학회지
• /
• 제29권6호
• /
• pp.363-370
• /
• 2019

The recent development of information and communication technologies brings new changes to automobile traffic systems. The most typical example is the advancement of dedicated short range communication(DSRC). DSRC mainly consists of an intelligent transportation system(ITS), an electronic toll collection system(ETCS) and an advanced traveler information system(ATIS). These wireless communications often cause unnecessary electromagnetic waves, and these electromagnetic waves, in turn, cause frequent system malfunction. To solve this problem, an absorber of electromagnetic waves is suggested. In this research, various materials, such as powdered metal and iron oxides, are used to test the possibility for an effective absorption of the unnecessary electromagnetic waves. The various metal powders are made into a thin sheet form by compositing through processing. The electromagnetic characteristics(complex permittivity, complex permeability) of the fabricated sheet are measured. As a result, we achieve -6.5 dB at 940 MHz(77.6 % absorption rate) with a 1.0 mm-thickness electromagnet wave absorber, and -9.5 dB at 940 MHz(88.8 % absorption rate) with a 2.0 mm-thickness absorber.

• 한국항공우주학회지
• /
• 제47권3호
• /
• pp.228-239
• /
• 2019

단거리 탄도 미사일의 개념 형상을 설계하기 위하여, 부피, 공력, 추진, 구조, 안정성, 비행 궤적 등의 다양한 관점을 고려하는 최적화 문제를 정립하였다. 이를 위하여 기존의 미사일 사례를 분석하여, 설계 조건과 성능지수를 도출하였다. 각 서브 시스템의 모델을 통합하여, 전체 시스템의 성능을 분석하였다. 설계 예시를 통하여, 여러 설계변수가 최종 성능에 미치는 관계성을 분석하였다.

• 한국광학회지
• /
• 제31권4호
• /
• pp.183-190
• /
• 2020

본 논문에서는 넓은 조사 면적에 단거리 조사시에도 균일한 조명도 분포를 가지도록 하는 비대칭 배광의 조명 광학계에 대한 연구를 진행하였다. 단거리에 설치되는 조명의 경우 조사 거리가 짧기 때문에 충분한 배광 분포 형성이 되지 못해 조명의 균일도를 만족하기 어렵다. 또한 시인성을 위해 조명기기가 기울어져 설치되기 때문에 비대칭 배광의 조명 설계가 요구된다. 이러한 문제점을 해결하기 위해 비대칭 배광을 가지는 조명 광학계 설계를 통해 근거리 조사 시에도 대상 표면에 균일한 조명도를 얻을 수 있었으며, 이를 근거리 조명 중 하나인 라이선스 램프에 적용하여 법규 기준을 만족하는 것을 확인하였다.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.211-217
• /
• 2010

This paper introduces the Hull Mounted Sonar Vertical Scanning(HMS Verscan) technique to overcome the limitation of target detection in short range shadow zone. Numerical experiments were done with the HMS Verscan taking advantage of the vertical beamforming technique for two-dimension hydrospace(range-depth). For numerical experiments, ray model and high-frequency monostatic reverberation model were used. HMS Verscan increased a sound pressure level at the short range shadow zone through reflections at the sea surface and seafloor. Inclusion of the boundary scattering improved target detection due to the sound reflected into the shadow zone.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1519-1526
• /
• 2017

The existing DSRC(Dedicated Short Range Communication) scheme has a limitation in providing various services through short-range wireless communication. Therefore, it is necessary to develop an intelligent WAVE/DSRC hybrid wireless platform that can improve data transmission speed and extend the effective communication range. This paper introduces WAVE/DSRC integrated platform technology using WAVE(Wireless Access in Vehicle Environments) to overcome the disadvantages of DSRC. First, the desinged software configuration of the WAVE/DSRC integrated platform is described. Then each task operation scheme and WAVE software design are described. By applying the WAVE/DSRC integrated platform, we can compensate the shortcomings of DSRC. It can provide more accurate and reliable services.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.63-64
• /
• 2007

Polystyrene-block-polymethyl methacrylate (PS-b-PMMA) can pattern nanoscale structures over large areas. However these patterns have a short-range order. These short-range order limits their utility in some applications. Consequently, we have to overcome this limitation of block-copolymer. In this study we added a electrical field to the standard block-copolymer patterning method for long-range ordered arrays of nanostructures. This method is conformed by annealing a block copolymer with applied voltages. It is very simple method that do not have any additional hour. In this reason it can be applied easily for other nanostructure fabrications. This method opens up a new route to the controlled phase separation of block copolymers with precise place of the nanostructures.

• 대한임베디드공학회논문지
• /
• 제6권5호
• /
• pp.281-286
• /
• 2011

FMCW Radar sensor is commonly used for an automobile collision avoidance system for rider's safe. Systems using FMCW radar, however, would be one of expensive solutions for just simple rear obstacle detection purpose due to its high cost. In this letter, a short range rear obstacle detector using novel 24GHz AM radar sensor is presented. It can be implemented at significantly lower cost than FMCW radar for practical commercialization. The proposed AM radar sensor module is fabricated in a single aluminum housing to reduce the overall size while using single power supply voltage of 12V with 1200mA current for automotive applications. The measured detection range is up to 210cm with 10cm of distance resolution, which is suitable for a parking assistance system for automobiles.

• 정형스포츠물리치료학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2018

Purpose: This study investigated the effect of the augmented reality (AR)-based knee joint short period exercise program and used a motion analyzer with a 3D camera to determine the range of motion and dynamic balance and further investigate the effects of therapeutic exercise on patients. Methods: This study used AR-based motion analysis and a Y-balance test to measure the range of motion (ROM) of each joint: the hip joint and the knee joint. After the measurements, an exercise program was applied to the subjects, using the knee motion program function, and the muscles of the quadriceps femoris and the hamstring were stretched or strengthened. Results: Our results showed knee joint extension at the dominant hip joint flexion position. While there was no significant difference (p>.05) at this position, there were significant differences in the non-dominant hips, unbalanced knee joint flexion, and superior knee joint flexion (p<.05). The Y-balance test using the non-dominant leg supported by the dominant legs showed that the absolute reach was $69.70{\pm}7.06cm$ before the exercise, and the absolute reach after the exercise was $77.56{\pm}6.09cm$ (p<.05). Conclusions: There was a significant difference when the movement of the lower limbs supported the superior limbs, and a significant difference was found in the ROM when the non-dominant side supported the dominant side. Therefore, the AR-based exercise program improves the balance of the human body and the range of motion of the joints, and research that aims to improve patients abilities should continue.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.101-108
• /
• 2010

The local structural states of amorphous alloys have been depicted previously via short-range orders (SROs). However, the concept of SROs alone is inadequate and sometimes insufficient to explain the structure-property relation of the amorphous alloys. In this study, we propose new types of medium-range building structures that affect the mechanical properties, plasticity in particular. Using a combination of molecular dynamics simulations and the Voronoi tessellation method, we demonstrate a three-dimensional configuration of icosahedral medium-range orders (I-MROs) and elucidate how these icosahedral orders evolve by the application of shear deformation. It was observed that the structural stability of the icosahedral orders relies largely on how they are linked via percolation and this linking is explained in detail.

• 한국항행학회논문지
• /
• 제10권1호
• /
• pp.7-12
• /
• 2006

본 논문에서는 지능형 교통망 시스템 서비스에 사용될 5.8GHz 대역에서 OFDM을 이용한 단거리 전용 통신 시스템의 성능 평가 및 분석하였다. DSRC 채널은 차량의 이동 속도가 최대 180km/h 로 빠른 속도를 가지며, 이로 인하여 핸드 오프가 발생하지 않을 경우, 다양한 정보를 제공하기에는 서비스 시간이 매우 짧다. 따라서, 교통정보와 다양한 멀티미디어 서비스 등을 하기 위해서 더 높은 전송속도가 요구되며, 현재 차세대 DSRC 시스템의 데이터 전송 속도는 10Mbps 이상으로 추진되고 있다. 본 논문에서는 라이시안 채널에서의 수신 신호를 컴퓨터 시뮬레이터를 이용하여 실험하였고, BCH 부호화 기법을 적용하여 시스템의 성능을 분석하였다.