• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.78-85
• /
• 1987

In order for Paldanghomil (winter rye) to be investigated if its grain yield is able to be produced after clipping just before winter season for forage utilization this experiment was carried out under the four sowing dates of four locations in Korea (Chunchon, Suwon, Hwasung and Chungju). In rye clipping plot earlier sowing showed taller plant height, more number of tillers/㎡ and higher forage yield before winter season, indicating the highest forage yield (1803 kg/10a) in Chunchon by sowing of September II. Forage yield of rye before winter season was mainly influenced by plant height and number of tillers/㎡, showing more effect of plant height. Rye plants were more or less affected on winter damages, late heading and short culm by clipping before winter season. Analysis of variance indicated that only number of spikes/㎡ among grain yield components showed the high significance according to the clipping method, and that there showed little variation for other yield components due to the sowing date and clipping method. There showed more grain yield in non-clipping rather than that of clipping plot, indicating the difference of 46kg/10a. This was resulted from short culm and severe winter damages caused by clipping before winter season. Of the grain yield components, number of spikes/㎡ was greatly influenced for grain yield by analysis of stepwise regression. Therefore, grain yield of rye was able to produce after forage utilization before winter season due to the appropriate crop and soil managements, by resulting from the little variation in grain yield between clipping or non-clipping plots and from the higher grain yield by the early sowing.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.465-472
• /
• 1998

In this study short gain rough rice(Chu-cheong) with initial moisture content of around 12%(w.b.) was exposed to 3 levels of relative humidity(70, 80 and 90%) and 3 levels of temperature(20, 25 and 3$0^{\circ}C$) of the air, in order to evaluate the adsorption characteristics of rough rice and the rate of cracked kernels which will serve as the basic data when developing the quality adjusting equipment. The result showed that the moisture content of rough rice increased rapidly during the early stages of moisture adsorption like other grains, and at least 70% of the adsorption occurred within the first 24 hours of exposure to the humid environment. Adsorption rate was more related to relative humidity than the temperature of air stream, and the higher the relative humidity, the higher the adsorption rate. And the Page's equation predicted best the adsorption process of this study. Experimental results for the crack generation during the adsorption process showed that the higher the relative humidity the more the cracked kernels, and that the temperature had little effect. An empirical equation was developed to predict the crack ratio for the conditions of this study, and Nishiyama model predicted better the crack generation than Hoerl model.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.11-20
• /
• 1997

Thin layer drying tests of short gain rough rice were conducted in an experimental dryer equiped with air conditioning unit. The drying tests were performed in triplicate at three air temperatures of $35^circ$, $45^circ$, $55^circ$, and three relative humidities of 40%, 55%, 70%, respectively. Previously published thin layer equations were reviewed and four different models widely used as thin layer drying equations for cereal grains were selected. The selected four models were Pages, simplified diffusion, Lewis's and Thompson's models. Experimental data were fitted to these equations using stepwise multiple regression analysis. The experimental constants involved in tow equations were represented as a function of temperature and relative humidity of drying air. The results of comparing coefficients of determination and root mean square errors of miosture ratio for low equations showed that Page's and Thompsons models were found to fit adequately to all drying test data with coefficient of determination of 0.99 or better and root mean square error of moisture ratio of 0.025.

• Journal of the Korean Ceramic Society
• /
• v.29 no.4
• /
• pp.305-311
• /
• 1992

As compared with conventional sintering, rapid heating in microwave system could enhance sinterability and final properties of alumina with a very short sintering time. In this study microwave sintering was performed using zirconia brick as a reaction chamber which was positioned in a 2.45 GHz(700 W) multimode microwave cavity. Microwave-sintered alumina showed high density and smaller grain size than conventionally sintered alumina because the ratio of densification rate/grain growth rate was increased by rapid heating.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.28-34
• /
• 1982

This experiment was conducted to study on some morphological characteristics of rice grain and chaff with specific gravity. The size of grain was greater in grains with heavier specific gravity. Indica varieties were large in length, but short in width and thickness of grain, and was thin in grain form and small in volume of grain compared with Japonica variety. The coefficient of variability was high in grains with lower specific gravity. The accumulation of assimilation product was more influenced with width and thickness rather than length of grain. The percentage of fully ripened grain was high in small size variety. The green rice and imperfect grain showed higher distribution ratio in the lower specific gravity. The chaff of less filled grain had higher content of nitrogen and lower content of potassium and sillicate than the filled.

• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.17-32
• /
• 1982

The binders introduced in Korea were originally designed to be used for Japonica-type varieties which have relatively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during binder operation. This study was intended to investigate analytically and experimentally the major sources of grain losses caused by three kinds of binders now introduced in Korea. Actual modification for each of three binders was done and experimentally compared to see if any improvement on grain loss was achieved. The results obtained in this study are summarized as follows; 1. It was required that the power transmission of binder should have a shifting mechanism so that velocities of pick-up and traveling units could be changed independently as desired according to the Japonica-type and Tongil varieties. In other words, the desired velocity of traveling unit should be obtained by shifting the transmission and the velocity of pick-up unit should be selected by reaping clutch according to the variety independent of the velocity of traveling unit as shown in Fig. 6. 2. To reduce grain loss it was desired that the moving parts of the pick-up unit should have the lowest possible velocities in harvesting Tongil varieties, unless the reduction of the speed be hindered the conveyance of the material. Based on the study, it was concluded that the velocities of pick-up unit be reduced by about 35% of those of the existing units. 3. It was found that the lug at the upper rotating section of pick-up case gave a severe impact on the ears of rice to increase grain loss. The optimum design of pick-up case to protect the ears from the protruding part of the lug was recommended by the result of analysis of the trajectory of the end-point of lug at the position. 4. It was proved analytically and experimentally that pick-up unit at the lower-rotating part was the other important source of grain loss in pick-up and divider assembly. In order to reduce a grain loss incurred by lugs at their lower-rotating section, it was suggested to improve it by (1) widening the space between right and left lower-rotating section, (2) shortening the length of lugs, (3) enlargement of the angle between the pick-up case and ground-level, and (4) attaching guard to right and left dividers so that the rotating lug could not give a high impact to the paddy hill. 5. Pick-up and divider assembly of the original binder of three models studied was modified according to the suggestions that were given by the preliminary study. Field test showed that the modified binders were able to reduce grain losses by about 0.4-0.7 percentage points compared to those without modification.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.67-67
• /
• 2017

We developed the breeding materials with diverse grain size and shape in japonica rice. Grain size and shape are important factors affecting consumer preference and choice. However, most of Korean japonica rice cultivars have small, short, and round grain. To diversify the grain size and shape of japonica rice, we conducted the breeding program using donor parents, Jizi1560 and Jizi1581. Jizi1560 and Jizi1581 are japonica germplasm with extremely large grain. Four crosses between the each donor parents and high yielding japonica rice cultivars, Deuraechan and Boramchan, were constructed and then anther culture method was applied. We obtained 290 doubled-haploid (DH) lines with appropriated morphological traits and selected 91 DH lines with diverse grain size and shape. The grain related-traits of the selected DH lines showed a higher diversity when compared with 319 cultivars developed by NICS (264 japonica, 13 black, and 32 Tongil type cultivars). We designated the selected DH lines, four parents, and Daeripbyeo 1, large grain japonica cultivar, as the breeding materials for further analysis. The breeding materials were classified into five groups, A to E, based on the grain-related traits. Group A (including Jizi1581) and Group B (including Daeripbyeo 1) showed similar grain width, whereas Group A exhibited longer grain length and heavier grain weight. Group C (including Deuraechan and Boramchan) showed shorter and rounder grain shape and smaller grain size than any other groups. Group D including solely Jizi1560 had extremely large grain, such as the longest grain length, width, and thickness and heaviest grain weight. Group E including only two DH lines had long and slender grain shape, so that showed the highest ratio of length to width. The grain size and shape of the breeding materials exhibited beyond the characteristics of previously developed Korean japonica cultivars. The breeding materials will be applied in the breeding programs to diversify the grain size and shape of japonica rice.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.707-712
• /
• 1995

Grain boundary diffusion plays significant role in the fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission products such as Xe and Kr generated inside fuel pellet have to diffuse in the lattice and in the grain boundary before they reach open space in the fuel rod. In the mean time, the grains in the fuel pellet grow and shrink according to grain growth kinetics, especially at elevated temperature at which nuclear reactors are operating. Thus the boundary movement ascribed to the grain growth greatly influences the fission gas release rate by lengthening or shortening the lattice diffusion distance, which is the rate limiting step. Sweeping fission gases by the moving boundary contributes to the increment of the fission gas release as well. Lattice and grain boundary diffusion processes in the fission gas release can be studied by 'tracer diffusion' technique, by which grain boundary diffusion can be estimated and used directly for low burn-up fission gas release analysis. However, even for tracer diffusion analysis, taking both the intragranular grain growth and the diffusion processes simultaneously into consideration is not easy. Only a few models accounting for the both processes are available and mostly handle them numerically. Numerical solutions are limited in the practical use. Here in this paper, an approximate analytical solution of the lattice and stationary grain boundary diffusion in a polycrystalline solid is developed for the tracer diffusion techniques. This short closed-form solution is compared to available exact and numerical solutions and turns out to be acceptably accurate. It can be applied to the theoretical modeling and the experimental analysis, especially PIE (post irradiation examination), of low burn up fission. gas release.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.183-188
• /
• 2019

This study analyzed the effects of short-term interest rates, exchange rates and international oil prices on international grain prices using the EGARCH-GED model. The yield before one month of the international grain prices itself was found to have a significant effect on international grain prices for most periods. During the entire analysis period, none of the economic variables appeared to have a significant effect on international grain prices, whereas during the exchange fall period, only oil prices were shown to have a significant effect on international grain prices. In addition, during the pre-crisis period, interest rates, exchange rates and oil prices did not all have a significant effect, but during the post-crisis period only oil prices had a significant effect on international grain prices. It turns out that the factors affecting international grain prices are changing with the passage of time.

• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.57-65
• /
• 2010

This study was conducted to present primary data on the change of the physical characteristics of reservoir sediments for understanding the sedimentation. The records of the annual summation of the precipitation of >50mm per day (AP50) were compared with changes of bulk density, organic matter, mean grain-size, and sand ratio in sediment cores sampled from three reservoirs without dredging record. Reservoir sediments, characterized by mineral soil, contained organic matters originated from the debris of terrestrial plants, and changes of organic matter were related to changes of grain-size flowing into reservoirs when sediments of fine sandy loam showed 10% of organic matter contents. Rapid changes of grain-size and sand ratio in the sediment cores were associated with the increase and decrease of precipitation, and fluctuation of water level and water flow in reservoirs might have influenced on the formation of sediments in reservoirs. Records of AP50 suggested that sediments could accumulate more than about 30 within the short period of 10 years. The accumulated sediments in a short time can reflect the effect of natural and anthropogenic events on the physical characteristics of sediments.