• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.220-222
• /
• 2000

이동통신 시스템에서 가입자수가 증가하고 다양한 서비스가 구현됨으로써 전체적인 장비 또는 자원에 대한 부하가 증가하고 있다. 특히, 셀의 반경이 작아지고 단문(Short Message)을 활용한 다양한 부가 서비스가 개발됨으로써 이와 관련된 정보를 전달하는 페이징 메시지의 분류도 복잡해지고 페이징 채널의 부하도 커지고 있다. 본 연구에서는 먼저, 이동통신시스템에서 페이징 패널의 구조와 역할을 분석하고 페이징 채널에서 전송하는 메시지를 그 기능과 특성에 따라 분류한다. 긴급하게 전송되어야 하는 메시지를 보호하기 위한 우선권 부여 방법을 모색하고, 각 방법에 있어서 메시지 종류별 전송지연시간(Delay)을 수리적으로 도출하고 결과를 비교한다.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.300-305
• /
• 1998

This paper describes new sense amplifier with fast sensing delay time of 0.54ns and 32kb CMOS embedded SRAM with 4.67 ns access time for a 3-V power supply. It was achieved using the sense amplifier with multiple point sensing scheme and highs peed bit-line scheme. The sense amplifier saves 25% of the power dissipation compared with the conventional one while maintaining a very short sensing delay. The SRAM uses 0.5m double-polysilicon and triple-metal CMOS process technology. A die size is 1.78${\times}$mm2.13mm.

• Journal of applied mathematics & informatics
• /
• v.28 no.5_6
• /
• pp.1089-1099
• /
• 2010

An SIR epidemic model with pulse vaccination and time delay describing infection period is investigated. The global attractiveness of the infection-free periodic solution is discussed, and sufficient condition is obtained for the permanence of the system. Our results indicate that a large vaccination rate or a short period of pulsing leads to the eradication of the disease.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1481-1488
• /
• 1995

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of IIR lattice structure, which uses coherent light sources and consists of directional couplers whose coupling coefficients are restricted between 0 and 1. Considering restrictions of directional coupler, the design formulae and condition for realibility of optical fiber filter of IIR lattice structure which makes the optimal use of optical signal energy are derived.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.582-591
• /
• 2017

To address the wire complexity problem in large-scale globally asynchronous, locally synchronous systems, a current-mode ternary encoding scheme was devised for a two-phase asynchronous protocol. However, for data transmission through a very long wire, few studies have been conducted on reducing the long propagation delay in current-mode circuits. Hence, this paper proposes a current steering logic (CSL) that is able to minimize the long delay for the devised current-mode ternary encoding scheme. The CSL creates pulse signals that charge or discharge the output signal in advance for a short period of time, and as a result, helps prevent a slack in the current signals. The encoder and decoder circuits employing the CSL are implemented using $0.25-{\mu}m$ CMOS technology. The results of an HSPICE simulation show that the normal and optimal mode operations of the CSL achieve a delay reduction of 11.8% and 28.1%, respectively, when compared to the original scheme for a 10-mm wire. They also reduce the power-delay product by 9.6% and 22.5%, respectively, at a data rate of 100 Mb/s for the same wire length.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.413-420
• /
• 2017

We investigate the performance of a true time delay(TTD) phase shifter to reduce the beam squint caused by frequency changes of a phased array antenna in wideband communication systems. To design a high gain phased array antenna, we need a long TTD, which causes high RF loss, low resolution and large dimension of TTD phase shifters. To overcome the problems, we propose a schematic of dual TTD phase shifters, which consists of short time delay(STD) in radio frequency(RF) part and long time delay(LTD) in intermediate frequency(IF) part. Our analysis results show that the proposed scheme reduces the required bits and delay time in RF band of the TTD compared to the conventional single TTD scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.512-515
• /
• 2010

SIGINT(SIGnal INTelligence) includes several parameters intercepted by measurement and analysis of the RF(Radio frequency) signal from free space. One of the important parameters is frequency information. Expecially, in order to perform instantaneous frequency measurement of Radar and Missile seeker's RF signals, we use dedicated RF modules as a DFD(Digital Frequency Discriminator) to provide frequency information by measurement of the relative phase difference between signals via intended RF delay lines. It must measure and provide realtime based frequency information on short pulsed RF signal up to 100 nSec or less. This document proposes Ultra wideband DFD consisted of a RF input section of Wideband 4 channel RF delay line and correlator, a digital processing section to measure and provide frequency information from I/Q signal, and a frequency calibration section. Also, it will show design suitability based on test results measured under test condition of very short input pulse signals.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.557-565
• /
• 2018

For GNSS navigation in urban environment, a novel short delay multipath mitigation algorithm is proposed in this paper. This algorithm detects which satellite's signal is the multipath signal by using the constraint that GNSS receiver is equipped in a ground vehicle, then estimate new position after separating the measurement of that satellite. A criterion for detecting and validating the multipath signal depends on the performance grade of the GNSS receiver and the dynamics of the vehicle. In order to evaluate the proposed algorithm, the real data had been collected at the multipath environment of 4 scenarios. By post-processing the real data with both of the multipath mitigation algorithm in the receiver and the proposed algorithm, it can be checked that the position errors were less than 5 meters except the case that the number of visible satellite is lower than 5.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.65-73
• /
• 2004

In this paper, we propose a tunnel establishment scheme using Next Hop Resolution Protocol over mobile IP networks, which consist of LAN-based IP networks and ATM-based IP networks. As a basic idea, we use the shortest path algorithm to establish a short-cut tunnel between HA and FA. Also, we classify methods for establishing a short-cut tunnel into four cases considering the locations of HA, FA, CN and MN. To confirm the advantages of our schemes, which deliver packets using short-cut tunnel in optimized path method over mobile IP networks, we performed mathematical analysis and simulation, compared proposed schemes with existing IP routing method in terms of transmission delay between CN and MN. The simulation results show that our scheme have superior performance to that of existing IP routing mechanism, because the store-and-forward delay which occurred in IP routing mechanism is considerably reduced in short-cut tunnel over ATM networks.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.1-4
• /
• 2010

RS-485, communication bases from small network system must prepare in collision. The collision is that mean the data transfer breaks. For a stabilized communication chooses 1:N polling methods. But polling is low speed in addition to maybe overload Master device. So, usual N:N Prefers a communication. In this case, must be preparing to avoid collision or some solutions. Generally, to after collision retransmits after short time. It's called delay time for short time. When making a delay time, uses address of each systems. (Address of each node) If the many nodes collided, the each node has different delay time. When making a delay time, uses a usual random number. Making a random number is hard job. So uses a usual pseudorandom number. It is more difficult from small size MCU. The Chaos random number provides stabled value. Finally, when uses the Chaos random number, the stability and reliability of system get better.