• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.61-68
• /
• 1999

For the last two decades, waveform control techniques have been successively developed and applied for the inverter welding machines resulting in the substantial reduction of spatter generated in CO₂ welding. One of the constituents commonly involved in those techniques is to delay the instant of current increase to some extent after the initiation of short-circuiting. Although this technique has been known to be quite effective in reducing the spatter generation through the suppression of is instantaneous short circuiting, the delay time necessary for minimum spatter has not been clearly understood. In this study, the control system for varying the delay time was constructed so that the spatter generation rates could be measured over a wide range of delay time, 0.29-2.0 msec. As a result of this study, it was demonstrated that spatter generation rate(SGR) sharply decreased at delay time of 0.6 msec and longer accompanied with the change in characteristics of short circuit mode from the instantaneous short-circuiting(ISC) dominant to normal short-circuiting(NSC) dominant. Another feature that have been found in current waveform of over 0.6msec was the creation of current pulse right after the arc reignition stage. Because of this current pulses weld pool oscillated in wave-like fashion and it looks like to play an important role in developing short circuiting between electrode and weld pool.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.997-1010
• /
• 2014

Today, as the hierarchical cellular system is getting more attention than before, some recent studies introduce delay based admission control (AC) scheme which delays the admission to the macro-embedded small cell for a relatively short time to prevent unnecessary handover caused by the short-term visitors of the small cell area. In such delay based ACs, when we use improper delay parameter, the system frequently makes incorrect handover decisions such as where unnecessary handover is allowed due to too short delaying, or where necessary handover is denied due to too long delaying. In order to avoid these undesirable situations as much as possible, we develop a new delay parameter decision method based on probabilistic cell residence time approximations. By the extensive numerical and analytical evaluations, we determine the proper delay parameter which prevents the incorrect handover decision as much as possible. We expect our delay parameter decision method can be useful system administration tips in hierarchical cellular system where delay based AC is adopted.

• 한국경영과학회지
• /
• 제38권3호
• /
• pp.37-50
• /
• 2013

The purpose of this study is to determine the indicators and the criteria to classify types of train delays of high-speed rail in South Korea. Types of train delays have divided into the chronic delays and the knock-on delays. The Indicators based on relevance, reliability, and comparability were selected with arrival delay rate of over five minutes, median of arrival delays of preceding train and following train, knock-on delay rate of over five minutes, correlation of delay between preceding train and following train on intermediate and last stations, average train headway, average number of passengers per train, and average seat usages. Types of train delays were separated using the Ward's hierarchical cluster analysis. The criteria for classification of train delay were presented by the Fisher's linear discriminant. The analysis on the situational characteristics of train delays is as follows. If the train headway in last station is short, the probability of chronic delay is high. If the planned running times of train is short, the seriousness of chronic delay is high. The important causes of train delays are short headway of train, shortly planned running times, delays of preceding train, and the excessive number of passengers per train.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.185-201
• /
• 2023

Grant-free random access (GFRA) can reduce the access delay and signaling cost, and satisfy the short transmission packet and strict delay constraints requirement in internet of things (IoT). IoT is a major trend in the future, which is characterized by the variety of applications and devices. However, most existing studies on GFRA only consider a single type of device and omit the effect of access delay. In this paper, we study GFRA in multicell massive multipleinput multiple-output (MIMO) systems where different types of devices with various configurations and requirements co-exist. By introducing the backoff mechanism, each device is randomly activated according to the backoff parameter, and active devices randomly select an orthogonal pilot sequence from a predefined pilot pool. An analytical approximation of the average spectral efficiency for each type of device is derived. Based on it, we obtain the optimal backoff parameter for each type of devices under their delay constraints. It is found that the optimal backoff parameters are closely related to the device number and delay constraint. In general, devices that have larger quantity should have more backoff time before they are allowed to access. However, as the delay constraint become stricter, the required backoff time reduces gradually, and the device with larger quantity may have less backoff time than that with smaller quantity when its delay constraint is extremely strict. When the pilot length is short, the effect of delay constraints mentioned above works more obviously.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.721-724
• /
• 2000

This paper has been demonstrated to be essential to successful telemanipulator control when the communication delay between master arms in the operator control station and telemanipulators in the remote site. This paper includes the human dynamics to generate a control command, the monitoring force feedback in order to robust under short time delays and the controller not to requre the derivative of interaction forces. Simulation results suggest that, the proposed control system should be superior to conventional systems in terms of performance and robustness under short time delays.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.279-281
• /
• 2012

A short chemical mechanism was developed with the chemical model reduction strategy based on the use of Simulation Error Minimization Connectivity Method(SEM-CM). We examined the accuracy resulting from using this mechanism, as compared with the full mechanism, for premixed flames and auto-ignition of methane-air mixture under high pressures. These comparisons are in good agreement, but it has a little divergence to predict the ignition delay time at high pressure conditions as compared with experiment results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1120-1124
• /
• 2005

We reviewed controllers with a time delay estimation in this paper. Time delay control (TDC) and sliding mode control (SMC) are well known robust control schemes. Basically, the TDC has a main characteristic called a time delay estimation from which we can estimate the total uncertainty of a system. . The TDC causes the stick-slip in the case of systems with a friction. The so-called TDCSA which are short for TDC with switching action was developed to reduce the stick-slip. The TDC has the additional switching action term in the TDC structure. In the other hand, the SMC dose not have a time delay estimation but instead it can estimate the system uncertainty through the switching action. The SMC has a difficulty to estimate the total uncertainty of a system because it does not have a time delay estimation. In order to solve the difficulty, some control schemes were developed. Among them, we need to focus our attention on two control schemes: SMCPE and SMCTE, which are short for sliding mode control with a perturbation estimation and sliding mode control with a time delay estimation, respectively. In this paper, we analyzed and compared the characteristic of above three controllers. Even though the motives for the development of three control schemes are different, three control schemes have much in common in terms of their controller structures.

• 대한전자공학회논문지
• /
• 제3권1호
• /
• pp.12-17
• /
• 1966

전자 지연선에 대한 보다 깊은 이론적 해석이 본 논문 속에 제시되었고 n=0 mode 동작시 지연선의 특성을 개량하기 위하여 단락 coil을 사용하므로써 위상이 다른 전류가 상호 자속을 상살시키는 현상을 제거하고 결과적으로 단위 길이당 시간 지연을 증가시킬 수 있음을 이론적으로 입증하고 실험에 의하여 확인하였다. 직경이 3"/8이고 길이가 6"인 전자 지연선을 제작한 후 실험한 결과 10 micro sec/m의 시간 지연을 측정할 수 있었다. 이는 Onoda나 Katz가 얻은 결과보다 월등하게 우수하다고 생각한다. 또한 실제 설계자를 돕기 위하여 설계 공식을 집약하여 알기 쉽게 설명하였다.

• 한국통신학회논문지
• /
• 제19권12호
• /
• pp.2376-2385
• /
• 1994

디지털 TV 신호를 수신함에 있어서 복호화 지연과 채널변경 지연은 응용측면에서 매우 중요한 요소들이다. B-화면이 없는 MPEG-2의 SIMPLE PROFILE에서 intra-slice 부호화방식은 영상 복호화과정에서 지연시간을 짧게 하는 근원적인 방식들 중의 하나이다. 그 방식에는 복호화 지연시간은 짧은 장점이 있으나 채널변경 지연시간은 길어지는 단점이 있다. 본 논문에서는, SNR 성능의 손실은 무시할 수 있을 만큼 적게 하며 채널변경 지연을 줄이는 방법을 제안한다. 이를 위해서 슬라이스들의 여러 영역으로 화면들을 구분하고 화면간 부호화를 위한 이동벡터 추정에서 약간의 제한을 부가하며, 이로 인해 임의접근 위치가 효과적으로 증가되고, 채널변경 지연시간이 줄어듬을 확인한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1005-1008
• /
• 2000

This paper presents a simple method to estimate short-circuit power dissipation and propagation delay for static CMOS logic circuits. Short-circuit current expression is derived by accurately interpolating peak points of actual current curves which is influenced by the gate-to-drain coupling capacitance. The macro model and its expressions estimating the delay of CMOS circuits, which is based on the current modeling expression, are also proposed after investigating the voltage waveforms at transistor output modes. It is shown through simulations that the proposed technique yields better accuracy than previous methods when signal transition time and/or load capacitance decreases, which is a characteristic of the present technological evolution.