• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.495-502
• /
• 2008

To analyze the growth of SOB(Thiobacillus novellus) and biochemical corrosion of concrete, simulation test method and device were developed, and basic conditions for SOB growth were established. Two types of simulation tests were conducted according to a transplant method and a concentration of $H_2SO_4$. As a result, the SOB growth in distinct manners and antibiosis of specimen were observed. In the case of the specimens indirectly transplanted with SOB through culture solution submersion at a hydrogen sulfide level of 120 ppm, the rapid activation of SOB and the resulting sulfuric acid production were observed. However, SOB were shown to grow rapidly and then die out in a relative short period of time. Meanwhile, in the case of the specimens directly transplanted with SOB at a hydrogen sulfide level of 50 ppm, the long-term growth of SOB was possible, but the production of sulfuric acid by SOB did not progress. In the case of the antibiotic metal-mixed specimens, SOB with destroyed cell membranes and internal organizations were observed.

• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.17-32
• /
• 1982

The binders introduced in Korea were originally designed to be used for Japonica-type varieties which have relatively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during binder operation. This study was intended to investigate analytically and experimentally the major sources of grain losses caused by three kinds of binders now introduced in Korea. Actual modification for each of three binders was done and experimentally compared to see if any improvement on grain loss was achieved. The results obtained in this study are summarized as follows; 1. It was required that the power transmission of binder should have a shifting mechanism so that velocities of pick-up and traveling units could be changed independently as desired according to the Japonica-type and Tongil varieties. In other words, the desired velocity of traveling unit should be obtained by shifting the transmission and the velocity of pick-up unit should be selected by reaping clutch according to the variety independent of the velocity of traveling unit as shown in Fig. 6. 2. To reduce grain loss it was desired that the moving parts of the pick-up unit should have the lowest possible velocities in harvesting Tongil varieties, unless the reduction of the speed be hindered the conveyance of the material. Based on the study, it was concluded that the velocities of pick-up unit be reduced by about 35% of those of the existing units. 3. It was found that the lug at the upper rotating section of pick-up case gave a severe impact on the ears of rice to increase grain loss. The optimum design of pick-up case to protect the ears from the protruding part of the lug was recommended by the result of analysis of the trajectory of the end-point of lug at the position. 4. It was proved analytically and experimentally that pick-up unit at the lower-rotating part was the other important source of grain loss in pick-up and divider assembly. In order to reduce a grain loss incurred by lugs at their lower-rotating section, it was suggested to improve it by (1) widening the space between right and left lower-rotating section, (2) shortening the length of lugs, (3) enlargement of the angle between the pick-up case and ground-level, and (4) attaching guard to right and left dividers so that the rotating lug could not give a high impact to the paddy hill. 5. Pick-up and divider assembly of the original binder of three models studied was modified according to the suggestions that were given by the preliminary study. Field test showed that the modified binders were able to reduce grain losses by about 0.4-0.7 percentage points compared to those without modification.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.19-27
• /
• 2007

In this study, the centrifugal tests were performed with varying the angle of slope such as 1:3, 1:2.5, and 1:2 in order to analyze the deformation and failure type of dredged clay slope for a short term. The displacement mode, displacement vector and the variation of pore pressure with the different slope angle were measured. As a results, even though the displacement in the slope after 4 months were developed in the case of 1:3 for the dredged slope, there are little problems to obtain the stability of dredged slope because the original construction section maintains. Also, in the case of 1:2.5 after 4 months the local slope failure occurred and in the case of 1:2 after 2 months the circle failure starting from the point of the tensile crack occurred. After reviewing the results, the maximum vertical displacement occurred at the crest of slope and maximum horizontal displacement was about double of maximum vertical displacement.

• Archives of design research
• /
• v.6 no.1
• /
• pp.47-72
• /
• 1993

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.21-31
• /
• 1986

Here is a research on hospital foodservice system, when korea traditional food of pyeon yuk and bin dae deok were used by ready-prepared foodservice system, it was estimated the preservations of microbiological quality and sensory quality. All data collection was replicated three times. The results were as following; 1. In time and temperature data, two menu items were needed internal temperature below $7^{\circ}C$ in a cooling stage, and in the case of cook/chill storage, the days were shortened within weeks, and the holding time must be possiblely minimized. Finally foods were served sanitary. 2. In view of microbiological safety, in the case of cook/chill storage as $0{\sim}4^{\circ}C$ the days must be shortened within 2 weeks and its was possible to store until 6 weeks in $-20{\sim}-23.3^{\circ}C$. So to preserve pre-cooked food longly, it was effective to freeze them quickly by using vacuum package and to reheat them by a microwave oven before serving and to serve lastly in microbiological quality. 3. Hospital ready-prepared foodservice system with food storage in plastic bags, biochemical test of C. Perfingens C. botulinum and Salmonella were not detected. 4. By using of a microwave oven, it had effects of thawing, reheating and sterilizing of chilled and frozen foods in a short time. 5. Sensory evaluations were made by a 10-member panel using five scoring tests. Because sensory of quality was lowered in the case of chilled storage, it was possible to serve foods within 2 weeks. Texture and aroma were preserved by cook/frozen system and usually there was no significance from 4 weeks until 6 weeks, but considering of the objects, it was good to store until 4 weeks in sensory quality.

• Journal of Cardiovascular Imaging
• /
• v.31 no.2
• /
• pp.71-82
• /
• 2023

BACKGROUND: Cardiac magnetic resonance fingerprinting (cMRF) enables simultaneous mapping of myocardial T1 and T2 with very short acquisition times. Breathing maneuvers have been utilized as a vasoactive stress test to dynamically characterize myocardial tissue in vivo. We tested the feasibility of sequential, rapid cMRF acquisitions during breathing maneuvers to quantify myocardial T1 and T2 changes. METHODS: We measured T1 and T2 values using conventional T1 and T2-mapping techniques (modified look locker inversion [MOLLI] and T2-prepared balanced-steady state free precession), and a 15 heartbeat (15-hb) and rapid 5-hb cMRF sequence in a phantom and in 9 healthy volunteers. The cMRF_5-hb sequence was also used to dynamically assess T1 and T2 changes over the course of a vasoactive combined breathing maneuver. RESULTS: In healthy volunteers, the mean myocardial T1 of the different mapping methodologies were: MOLLI 1,224 ± 81 ms, cMRF_15-hb 1,359 ± 97 ms, and cMRF_5-hb 1,357 ± 76 ms. The mean myocardial T2 measured with the conventional mapping technique was 41.7 ± 6.7 ms, while for cMRF_15-hb 29.6 ± 5.8 ms and cMRF_5-hb 30.5 ± 5.8 ms. T2 was reduced with vasoconstriction (post-hyperventilation compared to a baseline resting state) (30.15 ± 1.53 ms vs. 27.99 ± 2.07 ms, p = 0.02), while T1 did not change with hyperventilation. During the vasodilatory breath-hold, no significant change of myocardial T1 and T2 was observed. CONCLUSIONS: cMRF_5-hb enables simultaneous mapping of myocardial T1 and T2, and may be used to track dynamic changes of myocardial T1 and T2 during vasoactive combined breathing maneuvers.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.360-366
• /
• 2012

In the power distribution panel installed in airport or industrial facilities, MCCB has been used for main switch and ELCB for branch switch to perform human body and leakage-inducing fire protection as well as overcurrent and short circuit protection. Especially for the airport panel, increase in accident protection is needed for stable power supply due to rapid modernization with fast-growing users, higer capacity and diversification of equipment, the increase of power capacity and the breaker made slim is a main issue for now because the issue for installation space is standing out by making panel with two-row arrangement connection method, etc. due to a many use of branch ELCBs. In this thesis, we designed arc extinguishing mechanism, considered movement direction change of contact in mechanism design. Also, we designed the breaker to work stably in case of miniaturization of leakage detection circuit and reverse connection. We conducted short circuit test to verify its function and developed the breaker that can be improved protection against accidental current with slim size operating leakage function when reverse connection to help solve the problem in using space that is increasing in the airport distribution panel.

• Journal of Korean society of Dental Hygiene
• /
• v.2 no.2
• /
• pp.145-158
• /
• 2002

This is a section study for research of main cause and coping ways caused by stresses during the clinical experiment. It was researched by 231 students of third grade have finished clinical experiment until September though questionnaire. The methods for this study used the a stress measuring instrument thai was used by Hoa-Yun Jun and coping ways of stresses devised by Bell. We computed the frequency and the mean value by the SPSS 10.0 statistical data and we got the following result that from the experiment with t-test and the ANOVA analysis. 1. The mean value of stresses indicated rather higher states in figures 2,855 and the figures that were classified by each areas, indicated highest figures are affected by circumstances, that is 3.065. 2. As higher as the degree of satisfactions in their major, students feel stress less so, the result was not quite different between each of them (p=0.007). 3. The copping ways of stresses indicated, similar differences by using of long-term copping ways and short-term copping ways to cope with stresses(p=0.000). 4. In case of the students who failed college entrance exams and prepared for the next chance for more than one year, indicated highest figures that is 2.57 in short-term ways to cope with stresses, so it showed slightly differences between them(p=0.014). 5. According to the satisfactions of clinical experiments, there were not any statistical differences in long-term coping ways but, as smaller as the satisfactions, in that evidence of the students use short-term copping ways, it showed slightly differences between them(p=0.041). 6. According to the degree of stresses, low-stress groups use short-term coping ways more than high-stress groups, so it showed slightly differences between them(p=0.001). 7. As far as the using of long-term coping ways, the figures of between the lower stress groups and the higher stress groups indicated 2.89 and 2.97 respectably so, the figures were not so closed.

• Journal of agricultural medicine and community health
• /
• v.33 no.3
• /
• pp.324-334
• /
• 2008

Objectives: The purpose of this study was to develop and execute the village heath worker(VHW) training program which based on short term overseas medical volunteer and medical mission. Methods: Through case studies of previous VHW program and review articles about the state of medical volunteer and medical mission, we developed the VHW training program. Pilot test of the program was carried out in Tugeugarao city, Phillipines on July, 2008. The subject were 32 persons from 15 villages around Tuguegarao city. After training we surveyed regarding the satisfaction of training and the degree of getting knowledge and skills. Results: Through article review, we got the common subjects of previous VHW training program and the limitations of overseas medical volunteer and medical mission. We developed VHW training program aiming to community health promotion through community participation and community change. The main text was "Where There Is No Doctor" of Hesperian Foundation. The program executed through 1 day intensive lecture and practice. The satisfaction of the program was 8.95±1.70 on 10 point rating scale. Conclusions: We strongly expect VHW training program can be available as new model of short overseas medical volunteer as well as medical mission if we could systemize it with the confirming subject before training , management after training and continuous support through connection with the field.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.136-138
• /
• 2006

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. Ion migration phenomena has been observed in the field of exposing the specific environment and using for a long time. Also as the RoHS restriction was started in July 1st, 2006, Pb-free solder was utilized in electronics assemblies. In this case, it is very important to compatible between components and printed circuit board(PCB), thus surface treatment materials of PCB was changed to Sn, Sn-3.0Ag-0.5Cu, Cu. Therefore these new application become to need to reevaluate the sensitivity about electrochemical ion migration. This study was evaluated the occurrence time of electrochemical ion migration using by water drop test. We utilized PCB(printed circuit board) having a comb pattern as follows 0.1, 0.318, 0.5, 1.0 mm pattern distance. Sn-3.0Ag-0.5Cu and Sn-37Pb were electroplated on the comb pattern. 6.5V and 15.0V were applied in the comb pattern and then we measured the electrical short time causing by occurring the ion migration. In these results, we evaluate the sensitivity and derived the prediction models of ion migration occurrence time depending on the pattern materials, applied voltage and pattern spacing of PCB conductor.