• 제목/요약/키워드: Short TE

검색결과 85건 처리시간 0.019초

T1, T2강조영상, FLAIR영상의 임상 적용 (T1-, T2-weighted, and FLAIR Imaging: Clinical Application)

  • 김재형
    • Investigative Magnetic Resonance Imaging
    • /
    • 제13권1호
    • /
    • pp.9-14
    • /
    • 2009
  • T1, T2강조영상, FLAIR (fluid attenuated inversion recovery) 영상기법은 뇌 MRI의 가장 기본적인 영상기법들이다. T1강조영상은 짧은 TR과 짧은 TE를 이용한 스핀에코 기법으로서 조직의 T1이완시간의 차이를 신호 차이로 반영하는 기법이다. 짧은 TR을 사용하면 조직 간에 종축 자기화의 회복 정도가 크게 차이나게 되며 이를 신호에 반영하는 것이다. T2강조영상은 긴 TR과 긴 TE를 이용한 스핀에코 기법으로서 조직의 T2이완시간의 차이를 신호 차이로 반영하는 기법이다. 긴 TE을 사용하면 조직 간에 횡축 자기화의 붕괴가 크게 차이나게 되며 이를 신호에 반영하는 것이다. FLAIR는 180도 반전펄스를 먼저 가하는 반전회복 (inversion recovery) 기법의 일종으로서 뇌척수액의 신호를 억제하기 위하여 2500 msec 정도의 반전시간을 적용한다.

  • PDF

스퍼터링에 의한 CdTe 박막 제조 조건이 CdTe/CdS 태양전지의 특성에 미치는 영향 (Effect of Sputtering Conditions for CdTe Thin Films on CdTe/CdS Solar Cell Characteristics)

  • 정해원;이천;신재혁;신성호;박광자
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권9호
    • /
    • pp.930-937
    • /
    • 1997
  • Polycrystalline CdTe thin films have been studied for photovoltaic application because of their high absorption coefficient and optimal band energy(1.45 eV) for solar energy conversion. In this study CdTe thin films were deposited on CdS(chemical bath deposition)/ITO(indium tin oxide) substrate by rf-magnetron sputtering under various conditions. Structural optical and electrical properties are investigated with XRD UV-Visible spectrophotometer SEM and solar simulator respectively. The fabricated CdTe/CdS solar cell exhibited open circuit voltage( $V_{oc}$ ) of 610 mV short circuit current density( $J_{sc}$ ) of 17.2 mA/c $m^2$and conversion efficiency of about 5% at optimal sputtering conditions.

  • PDF

n-Cds/n-CdTe/p-CdTe 태양전지의 분광반응도 (Spectral Response of the n-CdS/n-CdTe/p-CdTe Solar Cells)

  • 임호빈;김선재
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.248-250
    • /
    • 1987
  • Transparent CdS films with low electrical restivity on glass substrates were prepared by coating a CdS slurry which contained 10 wt.% $CdCl_2$, and sintering in a nitrogen atmosphere at $600^{\circ}C$ for 2hr. All-polycrystalline CdS/CdTe solar cells were fabricated by coating CdTe slurries, which contained 1.0 or 4.5 wt.% $CdCl_2$, on the sintered CdS films and sintering at $700^{\circ}C$ for various periods of sintering. The spectral responses of the sintered CdS/CdTe solar cells were measured and compared with theoretically calculated quantum efficiency. The spectral responses of the sintered CdS/CdTe solar cells in the short-wavelength region decreases with-increasing sintering time. The poor response in this region is attributed to the existence of the Cd-S-Te solid solution in the compositional junction. The decrease in the maximum response in the long-wavelength region as the sintering exceeds certain time appears to be caused by the increase in the depth of the buried homo junction and by the increase in the series resistance. The $CdCl_2$ in the CdTe layer during sintering enchances the interdiffusion of S, Te or donor impurities across the metallurgical Junction causing the formation of deeper n-p junction in the CdTe layer.

  • PDF

$Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$계 박막형 열전발전 소자의 제작과 작동 특성 (Fabrication and Performance of $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ Thin Film Thermoelectric Generators)

  • 김일호;장경욱
    • 한국진공학회지
    • /
    • 제15권2호
    • /
    • pp.180-185
    • /
    • 2006
  • [ $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ ]계 박막형 열전발전 소자에 의해 volt 단위의 비교적 고전압에서 microwatt 수준의 출력을 발생시킬 수 있었다. 최대 출력은 온도차와 2차 함수적인 관계가 있었고, 주어진 온도차에서 판형 모듈의 적층수에 비례하여 증가하였다. 판형 모듈의 적층수와 직렬/병렬 연결 조합의 변화에 의해 출력 전압과 전류를 조절할 수 있었다. 온도차에 대한 개회로 전압과 폐회로 전류의 변화는 직선성을 보였다. 개회로 전압은 직렬 연결의 경우 판형 모듈의 수에 의존하였지만, 병렬 연결의 경우에는 의존하지 않았다. 반면, 폐회로 전류는 직렬연결의 경우 판형 모듈의 적층수와 무관하게 일정한 값을 나타내었고, 병렬 연결의 경우 판형 모듈의 적층수에 비례하여 증가하였다.

Echo time에 따른 MR spectrum의 SNR: 1.5T와 3.0T비교 (Signal to Noise Ratio of MR Spectrum by variation echo time : comparison of 1.5T and 3.0T)

  • 김성길;이규수;임채평
    • 한국방사선학회논문지
    • /
    • 제5권6호
    • /
    • pp.401-407
    • /
    • 2011
  • TE를 변화시킨 정상인 대뇌의 MR spectrum에서 주요 대사물질의 면적과 SNR을 측정하여 PRESS 펄스파형과 STEAM 펄스파형 그리고 1.5T와 3.0T간의 자장세기에 따른 spectrum 간의 차이를 알아보고자 하였다. Phantom 실험을 통하여 적절한 TR을 정한 후, 정상인 지원자 10명(3.0T 5명, 1.5T 5명 ; 남 22~30세 : 평균 26세)을 대상으로 단일용적기법의 STEAM과 PRESS 기법을 시행하였다. 사용된 장비는 3.0T MR scanner(Magnetom Trio, SIEMENS, Germany)와 1.5T MR scanner(Signa Twinspeed GE, USA)이였다. 영상변수는 TR은 2000ms, TE는 30ms, 40ms, 50ms, 60ms, 90ms, 144ms, 288ms, NA는 96, 용적 크기는 $20{\times}20{\times}20mm3$로 하였으며, spectrum 획득시간은 3분 20초였다. 획득한 데이터는 후처리과정을 통하여 PRESS와 STEAM, 그리고 1.5T와 3.0T system 간의 NAA, Cho, Cr 등의 단순면적값과 SNR을 비교하였다. 또한 육안적 관찰을 통하여 각 대사물질들의 관찰정도를 비교하였다. 1.5T와 3.0T MR spectrum을 분석한 결과, STEAM과 PRESS의 주요 대사물질의 단순 면적값과 SNR은 TE가 증가함에 따라 감소하는 경향을 보였으며, PRESS는 STEAM보다 1.5T에서 1.4배, 3.0T에서 1.3배 높은 SNR을 보였다. 자장의 세기에 따른 SNR 비교에서는 TE가 30ms에서 3.0T가 1.5T보다 약 2배 정도 높은 SNR을 보였으나 TE값이 증가함에 따라 3.0T에서의 SNR 감소율이 1.5T에서의 SNR 감소율보다 커서 TE가 90ms 이상부터는 큰 차이가 없었다. 반면 3.0T의 spectrum에서는 1.5T에서 구분할 수 없었던 ${\alpha}$-Glx, ${\beta}{\cdot}{\gamma}$-Glx, NAA complex등 작은 대사물질들을 보다 정확히 감별 할 수 있었고 short TE의 PRESS일 때 short TE의 STEAM보다 작은 대사물질들이 잘 관찰 되었다. 3.0T spectrum의 해상도와 SNR이 1.5T spectrum에 비하여 우수함을 알 수 있었다. 그러나 90ms이상의 long TE에서는 3.0T와 1.5T spectrum간의 SNR은 차이가 없었다. 따라서 고자장하에서의 자기공명분광법은 30ms 이하의 짧은 TE를 이용한 PRESS 펄스 파형을 사용하는 것이 임상적으로 유용하게 사용될 수 있을 것이라 사료된다.

고순도 $TeO_2$ 유리 구조의 중성자 회절 연구 (Neutron diffraction study on the structure of pure $TeO_2$ glass)

  • ;김세훈
    • 한국결정성장학회지
    • /
    • 제5권2호
    • /
    • pp.189-196
    • /
    • 1995
  • 중성자 회절에 의해 고순도 $TeO_2$ 유리의 단범위 구조를 조사하였다. $Te{\cdot}O$의 결합길이$d_{Te-O}$)와 산소원자를 둘러싼 Te 원자의 배위수($N_{Te-O}$)를 결정하기 위해 고해상도 RDF 곡선의 $Q_{max}$ = 20, 23, 25, 28, 30의 첫 번째 peak를, pairdistribution함수 모두 Gaussian 형식을 따른다는 가정하에 least-squae법으로 peak 분리를 했다. 이 결과를 토대로, 고순도$TeO_2$유리는 하나의 Te 원 자에 4개의 산소가 배위되어 있는$TeO_4$의 단위구조로 이루어져 있으며, 각 2개의 산소원자는 평균 결합길이가 각각 1.916 $\AA$과 2.123 $\AA$으로 Te 원자에 결합하고 있는 것으로 밝혀졌다.

  • PDF

Te-Se 칼코게나이드박막의 열화에 관한 연구 (A study on the degradation of Te-Se chalcogenide thin films)

  • 정홍배;이영종;김영호;이중기;송준석
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제1권1호
    • /
    • pp.62-69
    • /
    • 1988
  • Te-thin films were highly proper material for optical recording media, but has the demerit of short archival life time due to the unstability to humidity. In order to restrain the degradation, Te$_{100-x}$Se$_{x}$ alloys adding Se stable for the humidity were fabricated. Primarily, to measure the degradation rate with varing the composition of Se to x=5, 10, 14, 25 at.% at Te$_{100-x}$ Se$_{x}$, the change of light transmittance was used in various temperature-humidity environments. As the results, it was showed that Se$_{86}$Te$_{14}$ thin was the most proper composition for the improvement of degradation restraint.int.int.

  • PDF

W밴드 radial 전력 결합기용 TE10-TEM 모드 변환기 설계 (Design of TE10 to TEM mode convertor for W-band radial power combiner)

  • 김영곤;용명훈;류한춘;권세훈;우선걸
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권6호
    • /
    • pp.41-46
    • /
    • 2023
  • 본 논문에서는 W밴드 radial 전력 결합기용 TE10-TEM 모드 변환기에 대한 설계 방법을 제안하였다. 제안한 구조는 일반적으로 이용 가능한 핀을 이용하여 TEM 모드를 구현하도록 하였으며 2단의 임피던스 변환부 및 back-short 구조를 이용하여 TE10 모드에서 TEM 모드로 자연스럽게 변환되도록 설게 하였다. 제안한 모드 변환기의 핀 구조가 하우징에 접합되어 진동 및 충격의 환경이 성능에 영향 없도록 하였다. 제안한 구조의 back-to-back 특성은 92.5~97.7 GHz 대역에서 삽입손실 1.55 dB 이하 및 10 dB 이상의 반사손실을 가짐을 확인하였다. 제안한 모드 변환기를 이용하여 높은 출력 및 안정적인 환경조건을 요구하는 초소형 레이다 및 다양한 응용 분야에 적용이 가능하리라 판단된다.

Cross-Domain Text Sentiment Classification Method Based on the CNN-BiLSTM-TE Model

  • Zeng, Yuyang;Zhang, Ruirui;Yang, Liang;Song, Sujuan
    • Journal of Information Processing Systems
    • /
    • 제17권4호
    • /
    • pp.818-833
    • /
    • 2021
  • To address the problems of low precision rate, insufficient feature extraction, and poor contextual ability in existing text sentiment analysis methods, a mixed model account of a CNN-BiLSTM-TE (convolutional neural network, bidirectional long short-term memory, and topic extraction) model was proposed. First, Chinese text data was converted into vectors through the method of transfer learning by Word2Vec. Second, local features were extracted by the CNN model. Then, contextual information was extracted by the BiLSTM neural network and the emotional tendency was obtained using softmax. Finally, topics were extracted by the term frequency-inverse document frequency and K-means. Compared with the CNN, BiLSTM, and gate recurrent unit (GRU) models, the CNN-BiLSTM-TE model's F1-score was higher than other models by 0.0147, 0.006, and 0.0052, respectively. Then compared with CNN-LSTM, LSTM-CNN, and BiLSTM-CNN models, the F1-score was higher by 0.0071, 0.0038, and 0.0049, respectively. Experimental results showed that the CNN-BiLSTM-TE model can effectively improve various indicators in application. Lastly, performed scalability verification through a takeaway dataset, which has great value in practical applications.