• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.985-990
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.798-803
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband sound from a leak location and this sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.327-332
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than loom.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.612-620
• /
• 2015

Short-range detection of chemical agents deposited on ground surface using a standoff Raman system employing a pulsed laser at 248 nm is described. Mounted in a vehicle such as an NBC reconnaissance vehicle, the system is protected against toxic chemicals. As most chemicals including chemical warfare agents have unique Raman spectra, the spectra can be used for detecting toxic chemicals contaminated on the ground. This article describes the design of the Raman spectroscopic system and its performance on several chemicals contaminated on asphalt, concrete, sand, etc.

• 한국ITS학회 논문지
• /
• 제10권3호
• /
• pp.79-84
• /
• 2011

본 논문에서는 ITS 응용을 위한 Alamouti 기법을 이용한 효과적인 차량 검출 성능을 분석하였다. 차량 검출은 DSRC (Dedicated Short Range Communication) 기반의 하이패스 환경에서 실험하였다. 시스템 성능으로는 비트 에러 확률로 실험 결과 값에 대하여 분석하였으며, 실험환경은 진입차량의 속도를 60km/h로 가정하여 DSRC 기반의 변조방식인 ASK 기법 을 적용하여 실험하였다. 또한 적용된 채널은 Rician 채널을 적용하여 LOS (Line of Sight)환경을 고려하며 실험을 하였다. 또한 사용된 반송파 주파수는 일본 DSRC 시스템 하향링크를 참고하여 5.8GHz를 적용하였다. 실험결과로 안테나가 2개일 경우와 Alamouti 기법을 적용할 때의 검출성능을 각각 나타내었으며, Alamouti 기법을 적용할 때 성능이 보다 개선되었음을 본 실험을 통해 알 수 있었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.208-212
• /
• 2003

An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the conceptual design results of the multi-mode pulsed Doppler radar system testbed model for helicopter. Due to the inherent flight nature of the hovering vehicle which is flying in low-altitude and low speed, as well as rapid maneuvering, the moving clutters from the platform should be suppressed by using a special MTD (Moving Target Detector) processing. For the multi-mode radar system model design, the flight parameters of the moving helicopter platform were assumed: altitude of 3 Km, average cruising velocity of 150knots. The multi-mode operation capability was applied such as short-range, medium-range, and long-range depending on the mission of the vehicle. The nominal detection ranges is 30 Km for the testbed experimental model, but can be expanded up to 75 Km for the long range weather mode. The detection probability of each mode is also compared in terms of the signal-to noise ratio of each mode, and the designed radar system specifications ate provided as a design results.

• 대한전자공학회논문지TC
• /
• 제48권9호
• /
• pp.59-64
• /
• 2011

초광대역 레이더는 높은 분해 능력으로 인해 단거리 차량용 레이더로 주목받고 있다. 차량으로부터 반사된 레이더 신호는 "clutter"라는 원하지 않는 반사 신호를 갖게 되어, 목표물을 검출하는데 어려움을 갖게 된다. 그러므로 목표물에서 반사된 신호로부터 보다 확실하게 검출하기 위하여 레이더 검출기를 개발할 필요가 있다. 본 논문에서는 log-normal clutter 환경에서 다양한 평균과 분산에서 최적인 검출기를 구하였다. 비동기 방식의 검출기로 자승 검출기와 선형 검출기, 로그 검출기 등을 분석하였다. 본 논문에서는 컴퓨터 시뮬레이션을 통해 검출기의 성능을 분석하여, 차량용 레이더로 최적인 검출기를 구하였다.

• ETRI Journal
• /
• 제32권5호
• /
• pp.827-830
• /
• 2010

For an adaptive cruise control (ACC) stop-and-go system in automotive applications, three radar sensors are needed because two 24 GHz short range radars are used for object detection in an adjacent lane, and one 77 GHz long-range radar is used for object detection in the center lane. In this letter, we propose a single sensor-based 24 GHz radar with a detection capability of up to 150 m and ${\pm}30^{\circ}$ for an ACC stop-and-go system. The developed radar is highly integrated with a high gain patch antenna, four channel receivers with GaAs RF ICs, and back-end processing board with subspace based digital beam forming algorithm.

• Journal of Astronomy and Space Sciences
• /
• 제35권4호
• /
• pp.279-286
• /
• 2018

Radar sensors are used for space situational awareness (SSA) to determine collision risk and detect re-entry of space objects. The capability of SSA radar system includes radar sensitivity such as the detectable radar cross-section as a function of range and tracking capability to indicate tracking time and measurement errors. The time duration of the target staying in a range cell is short; therefore, the signal-to-noise ratio cannot be improved through the pulse integration method used in pulse-Doppler signal processing. In this study, a method of improving the signal-to-noise ratio during range migration is presented. The improved detection performance from signal processing gains realized in this study can be used as a basis for comprehensively designing an SSA radar system.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.883-889
• /
• 2009

근거리 운용 레이더는 여러 대의 레이더가 좁은 반경 내에서 동시에 운용되어야 하는 시스템으로 레이더간 간섭 배제가 매우 중요하다. 기본적으로 채널 주파수 분리를 통해서 간섭을 줄이고 있으나, 실제 구현상의 문제로 인하여 완벽하게 간섭을 배제하기가 쉽지 않다. 이에 근거리 운용 레이더에서 펄스간 코딩은 간섭을 원천적으로 배제하기 위하여 사용되었다. 본 논문에서는 펄스간 코딩의 개념, 적용 방안 및 실제 시험 결과를 제시하고자 한다.