• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.308-315
• /
• 2015

본 연구는 3D 프린터를 이용하여 통풍이 원활하고 위생적이며 선명한 방사선영상을 구할 수 있는 그물형 손목 부목을 제작하고자 하였다. 스캐너는 의료용 다중단층영상장치(MDCT)를 이용했으며, 3D 프린터 기기는 용융 적층 조형술(fused deposition modeling, FDM)의 프린팅 방식을 이용했다. 소재는 분해성 플라스틱 (poly lactic acid, PLA)을 사용하였다. 손목의 3 차원 볼륨렌더링은 MDCT에서 획득된 단층영상으로 구현하였다. 구현된 손목 3 차원 영상을 바탕으로 가상의 그물형 부목 모형을 디자인하고 출력하였다. 그 결과 3D 프린터로 출력된 부목이 기존 부목보다도 우수한 방사선 손목영상을 획득할 수 있었으며 가려움증 및 비위생적인 단점을 개선하고 부목 해체 작업이 용이하였다. 결론적으로 본 연구에서 모델링된 3D 부목 모형은 향후 3D 프린팅 부목 제작에 기초자료로 활용할 수 있으며 환자들의 실생활에 도움을 줄 것으로 기대한다.

• 대한간호학회지
• /
• 제23권1호
• /
• pp.56-67
• /
• 1993

The purpose of this study was to compare the circumference and skinfold thickness of upper and lower limb and the leg strength of the casted limb with those of the normal limb after removal of a leg cast. The subjects for the study were orthopedic patients who had had long and short leg casts or splints due to tibial, fibulal, metatarsal, calcaneus fracture or ankle sprains. The subjects were divided into two groups, those who had the cast on for less than 40 days and those for over 41 days. Circumference and skinfold thickness of the upper and lower limb on the side on which the cast was ap-plied were compared with those of the contralateral side after removal of the cast. Circumference and skinfold thickness of the upper and lower limb, and leg strength for those in a cast for under 40 days were compared with those of over 41 days for both the side to which cast was applied and the contralateral side. Measurements were made after removal of the cast. Skinfold thickness was measured by fat caliper, circumference was measured by tape and lower extremity strength was determined with flat foot pressing on an electronic digital health meter in the sitting position. The results can be summarized as follows : 1. The circumference of the upper and lower leg on the side on which the cast was applied, when measured after the cast was removed, were significantly less than those of the normal side, 93.88%, 93.11% each. 2. Skinfold thickness of the quadriceps and gastrocnemius on the side on which the cast was applied were significantly less than those of the normal side when measured after removal of the cast, 85.98%, 82.85% respectively. 3. Leg strength on the side where the cast was applied was significantly 1ss than that on the normal side, 60.20%. 4. There was no difference in the circumference of upper and lower limbs, skinfold thickness or leg strength on the side where the cast was applied between the group which had the cast applied for under 40 days and the group that had it applied for over 41 days. 5. The circumference of the upper arm and lower leg on the normal side for the group that had the cast applied for over 41 days was significantly greater than the group that had the cast application for under 40 days. T ere was no difference between the two groups in the circumference of the forearm and upper leg, skinfold thickness and leg strength in the normal side. From these results, it may be concluded that muscle atrophy was apparent in the casted limb compared to the normal limb, and the circumference of the upper arm and lower leg, and leg strength on the normal side increased after removal of the cast in the group which had the cast on for more than 41 days.

• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.317-326
• /
• 1998

시계열자료의 분해능력이 뛰어난 wavelet 변환을 사용하여 물소비특성을 분석하였다. Wavelet 변환의 기저함수로는 물수요량의 경우 Coiflets5 함수, 기온측정치의 경우 Coiflets3 함수를 사용하였으며 해석결과 212 scale에서 목표된 장기간에 걸친 변화추이는 hyperbolic tangent 함수의 형태로 전기간에 걸처 꾸준한 증가세를 보였다. 또한 절기혹은 경기주기와 밀접한 관련이 있을 것으로 생각되는 추가수요가 6월과 12월말을 정점으로 발생하였으며 이 추가 수요량은 하절기의 경우 $1,700\;\textrm{cm}^3/hr$, 동절기의 경우 $500\;\textrm{cm}^3/hr$ 정도인 것으로 관측되었다. 정수장 생산량 시계열자료에 내재한 주기성분은 주기가 각각 3.13day, 33.33 hr, 23.98hr와 12hr인 것으로 규명되었다. 진폭은 주기가 23,98hr인 성분이 가장 큰 것으로 밝혀졌으며 2i[i = 1,2,…12] scale에서 목도된 단주기성분들은 Gaussian PDF를 따르는 것이 확인되엇다. 잔차성분의 상호독립성, 자색파여부와 FPE의 최소화를 기준으로 할 경우 물수요량의 최적예측모형으로는 기온을 입력자료로한 다원 AR[32, 16, 23]과 다원 ARM [20, 16, 10, 23]인 것으로 판단된다.