• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.389-396
• /
• 2003

직류진원 장치의 부하에 단락이 발생하는 경우 직류전원을 부하로부터 신속히 차단하고 재인가 가능한 새로운 방식의 ac/dc 컨버터를 제안하였다. 제안한 방식의 컨버터 출력전윈은 부하단락시 차단 및 정상상태로 회복시 직류전원을 재인가하여 정격출력전압으로 확립되는데 소요되는 시간이 각각 수백 $\mu\textrm{s}$ 이내에 이루어지는 특징이 있다. 또한 컨버터 출력필터 커패시터는 부하가 단락된 상태에서도 방전하지 않고 거의 정격출력전압을 유지할 수 있으므로 직류전원을 단락상태가 소멸된 정상부하에 재인가시 전압의 오버슈트 없이 신속한 부하전압 확립이 가능하다. 제안한 방식의 컨버터는 기존 방식에 비해 구조가 간단하고 소형경량화 가능한 장점이 있다. 제안한 회로방식에 대한 동작원리 설명 및 특성해석을 하였으며 실험을 통하여 그 유용성을 입증하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권2호
• /
• pp.119-122
• /
• 2020

With recent ESS (Energy Storage System) fire accident, the fault protection performance is becoming more important. However, there has never been any experiments with the protection performance on the faults in the ESS system level. In this study, the effect of AC ground fault and IGBT (Insulated Gate Bipolar mode Transistor) short-circuit failure on MW class ESS was performed experimentally for the first time in the world. First of all, the effect of the AC single line ground fault on battery was analyzed. Moreover, the transient voltage was investigated as a function of the battery capacity and the power level. Finally, the breaking capability and insulation performance of ESS were examined under PCS short-circuit fault condition. Through the tests, it was found that ESS protection system safely blocked the faulty current regardless of the faults, whereas the electronic parts such as IGBT and MC (Magnetic Contactor) were broken by the fault current. Also, the electrical breakdown in ESS resulted from the transient voltage during the protection process.

• 대한전기학회논문지
• /
• 제35권2호
• /
• pp.67-76
• /
• 1986

It is observed that an appreciable short-circuit current (Is) flows by the time variation of temperature without applying external field in M1(metal)-P(polymer)-M2(metal)system. In M1-P-M2(A1) system, Is flows in the direction from the electrode(A1) having a lower workfunction to the counter electrode(M1) during heating and its magnitude increases as the thickness of polymer is decreased and as the heating rate is raised. The sign of Is is reversed in lower temperature region (under glass transition temperature) when the direction of temerature variation is changed during heating and cooling. From these experimental results, we can sugest that Is flows in the external short-circuit during the space charge distribution formed around both interfacial surfaces (M1-P and P-M2) is continuously maintained in the non-equilibrium state but not in equilibrium state.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권11호
• /
• pp.572-576
• /
• 2006

As the increasing of capacity and technology of power facilities, rotating machines such as turbine generators and water turbines are getting higher at capacity but smaller in size. Thus the monitoring and diagnosis of generators for fault detection and protection has attracted intensive interest. Most of electrical faults of rotating machines appear in their windings. In case of an after-fault in high capacity rotating machines, the recovering cost is usually very expensive and additional time is necessary for returning in a normal situation. In this paper, the magnetic flux patterns in air-gap of a generator under various fault states as well as a normal state are simulated by a conventional FEM tool. These results are successfully applied to detection and diagnosis of the short-circuit condition in rotor windings of a high capacity generator.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.400-404
• /
• 2015

Various kinds of winding arrangements can be used to enable fault current limiters (FCL) to tolerate higher forces without resulting in a substantial increase in construction and fabrication costs. In this paper, a distributed winding arrangement is investigated in terms of its effects on the short-circuit forces in a three-phase FCL. The force magnitudes of the AC supplied windings are calculated by employing a finite element-based model in the time stepping procedure. The leakage flux and radial and axial force magnitudes obtained from the simulation are compared to those obtained from a conventional winding arrangement. The comparison shows that the distributed winding arrangement significantly reduces the radial and, especially, the axial force magnitudes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1005-1008
• /
• 2000

This paper presents a simple method to estimate short-circuit power dissipation and propagation delay for static CMOS logic circuits. Short-circuit current expression is derived by accurately interpolating peak points of actual current curves which is influenced by the gate-to-drain coupling capacitance. The macro model and its expressions estimating the delay of CMOS circuits, which is based on the current modeling expression, are also proposed after investigating the voltage waveforms at transistor output modes. It is shown through simulations that the proposed technique yields better accuracy than previous methods when signal transition time and/or load capacitance decreases, which is a characteristic of the present technological evolution.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5471-5478
• /
• 2012

본 논문에서는 SURF 알고리즘을 이용하여 PCB에 발생하는 불량 중 한 형태인 쇼트-서킷 불량을 탐지하는 기술을 제안한다. 제안하는 방법의 기본적인 절차는 SURF를 이용하여 샘플 영상과 입력된 영상에서 특징점 추출, 특징점 매칭 및 매칭 결과를 이용한 원근변환 수행, 검사 위치 관심영역 추출, 이진화 및 쇼트-서킷 추출, 결과 검증 순이다. 본 논문에서 제안하는 방식은 수작업으로 진행되는 후 공정의 특징 상, 검사하고자 하는 PCB의 놓여진 위치와 각도가 균일하지 않고 제각각으로 놓여 있는 경우에도 강건하게 쇼트-서킷 불량을 탐지하는 것에 중점을 두고 있다. 이 방법은 PCB가 놓여진 위치와 각도가 다양한 경우에도 불량을 탐지할 수 있음을 보이며, 탐지율 및 탐지시간 관점에서 기존의 수작업으로 검사하는 경우보다 우수함을 실험을 통하여 보인다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권6호
• /
• pp.267-272
• /
• 2002

This Paper deals with the short circuit tests of the three-Phase DC reactor type fault current limiter (FCL) in changing of turns ratio of transformers. The experiment of this paper is a preliminary step to develop the FCL's faculties for an application to high voltage transmission line. So, superconducting coil was made of Nb-Ti, low temperature superconductor, and the ratings of the power system of experimental circuit are 400V/7A class. A three-phase DC reactor type FCL consists of three transformers, six diodes, one superconducting coil and one cryostat. The important point of experimental analysis is transient period, the operating lagging time of circuit breaker. As the results of the experiment, the values are referred to the limitation rate about 77% and 90% when the turns ratio of transformer was 1:1 and 2:1 respectively.

• Journal of Welding and Joining
• /
• 제17권3호
• /
• pp.36-43
• /
• 1999

The effect of Si content in welding wires on spattering characteristics and droplet transfer phenomena was studied. In MAG welding using 80% Ar-20% $CO_2$ shielding gas, spattering characteristics and droplet transfer phenomena were varied with Si content of wire. With increasing Si content, the spattering ratio and the ratio of large size spatter $(d\geq1.0mm)$ were increased. The increase of Si content in molten metal made surface tension increase due to reduction of oxygen content, which resulted from deoxidizing action of silicon. The increase of surface tension resulted in unstable transfer phenomena and arc instability in both short circuit and spray region. With changing Si content of wire, spattering characteristics and droplet transfer phenomena was directly influenced by the variation of surface tension, compared with the effect of arc stability.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.626-634
• /
• 2018

These days, widespread use of sensitive loads and distributed generators makes static transfer switch (STS) an essential component in power circuits to achieve a good power quality for AC Grids. In case of a short-circuit fault, previous STS cannot break the fault current. However, the proposed STS has the capability of breaking it quickly as a circuit breaker. Also if there are power quality problems such as Sag/Swell, the proposed STS can quickly transfers the load to the good quality source. Furthermore it is proved that the transfer time of the proposed STS is within one half of period of 3-phase source frequency regardless of the type of load. It is anticipated that the proposed STS may be utilized to realize many stable and reliable AC grid systems.