• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.768-773
• /
• 2009

Measuring method being applied for off-shore works is performed by using data logger or manual measuring instrument with wiring the cable connected from the sensor up to the position where measuring is allowed.(upper part of embankment or marine structure) Measuring management by using existing measuring method may be acceptable on the condition that the ground deformation volume(vertical, horizontal) is generally minimal and the site condition is good. But loss of measuring instrument, sensor cable failure or cutting is taken place frequently due to significant change of ground behavior caused by an external force change(embankment, excavation) under very soft ground condition(N value below 0-4). In case of the marine works, in particular, loss rate of measuring instrument is highly represented due to the factors of working barge anchoring, constructional interference and natural disaster. In order to solve these problems, measuring management was performed with employing underground wireless system at the immersed tunnel site. Measuring data was obtained freely under the marine environment by using underground wireless communication and cable cutting potential by ground behavior could be reduced. Measuring cost savings and its installation convenience were maximized by way of off-shore tower installation or cabling and by minimizing constructional interference of off-shore working barge. This case of measuring management was accomplished successfully.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1987.07a
• /
• pp.235-243
• /
• 1987

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.613-627
• /
• 2010

Ships and off-shore plants have very long lifecycles. Design data of ships and off-shore plants are used as master data in the subsequent phases after the design phase. Therefore, it is an important issue how to convert native design data generated from commercial shipbuilding CAD systems into neutral data with the use of international industrial data standards. International standard-based exchange of ship outfitting and off-shore plant data needs the construction of a library for specifications data of equipment and materials and the provision of external referencing mechanism for retrieving data stored in the library. This paper proposes an approach to construct a specifications data library with the use of ISO 15926 process plants. This library is used for providing specifications data through external referencing when translating ship outfitting data from TRIBON system into ISO 10303 STEP AP 227-formed data.

• Journal of Fisheries and Marine Sciences Education
• /
• v.15 no.2
• /
• pp.166-175
• /
• 2003

In order to offer fundamental data for the standard of comfilation of the budget on the compensation money for the reduction of fishing baot and index of investigation for computation on the average earnings of reduction of fishing boat, the fluctuation of actual outputs, expenses, earnings and the difference by type of coastal and off-shore fishery was investigated and analyzed. The results are as follows : 1. The average ouput money by large powered purse seine fishery was much with about 3,510 million won, but the average output money by off-shore gill nets fishery was little with about 8.4 million won. 2. The average catch by large powered purse seine fishery was many with about 296,000 M/T, but the average catch by eastern sea danish seine fishery was few with 4,600 M/T. 3. The average expense by large powered purse seine fishery was much with about 3,360 million won, but the average expense by diving fishery was little with 6.3 million won. 4. The average earning by large powered purse seine fishery was much with about 240million won, the average earning by offshore long line fishery was little with 18 million won. 5. The average earning rate by diving fishery was much with 31.62%, but the average earning rate by large powered purse seine fishery was little with 7.30%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.2
• /
• pp.277-286
• /
• 2013

Cross-shore sediment transport is very important factor in the design of coastal structures, and the beach profile is mainly affected by a number of parameters, such as wave height and period, beach slope, and the material properties of the bed. In this study cross-shore sediment movement was investigated using a physical model and various offshore bar geometric parameters were determined by the resultant erosion profile. The experiments on cross- shore sediment transport carried out in a laboratory wave channel for initial base slopes of 1/8, 1/10 and 1/15. Using the regular waves with different deep-water wave steepness generated by a pedal-type wave generator, the geometrical of sediment transport rate and considerable characteristics of beach profiles under storm conditions and bar parameters affecting on-off shore sediment transport are investigated for the beach materials with the medium diameter of $d_{50}$=0.25, 0.32, 0.45, 0.62 and 0.80 mm. Non-dimensional equations were obtained by using linear and non-linear regression methods through the experimental data and were compared with previously developed equations in the literature. The results have shown that the experimental data fitted well to the proposed equations with respect to the previously developed equations.

• The Journal of Fisheries Business Administration
• /
• v.21 no.2
• /
• pp.1-54
• /
• 1990

• Journal of Korea Fishing Vessel Association
• /
• v.71
• /
• pp.24-36
• /
• 1998

• Explosives and Blasting
• /
• v.11 no.3
• /
• pp.4-19
• /
• 1993

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.139-148
• /
• 2002

As the Busan harbor is getting susceptible to oil Pollution. the authors analyze the historical records of oil spill accidents and investigate the shoreline features. In addition. we evaluate the response capabilities and compute the required stockpiles of marine oil spill response with the worst case scenario in this area. As a result, it is shown that the recommendable oil spill response is to contain and mechanically recover all oils at sea surface in winter. while chemical dispersants can be used in summer with mechanical containment and recovery, and it is also found that off-shore booms of 3,000m and off-shore skimmers of 986MT/hour recovery rate should be stockpiled with 10,000∼60,000 liters of concentrate chemical dispersant and small amount of synthetic organic sorbents for possible use.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.817-825
• /
• 1998

A three-dimensional ecosystem model is applied to the Suyoung Bay, located at the southeastern part of Korea, to study of the material distribution in the time scale of several tens days. The model has included of the DIN(Dissolved Inorganic Nitrogen), DIP(Dissolved Inorganic Phosphate), phytoplankton, zooplankton and detritus, and also was coupled with the physical processes. The spatial distribution of chlorophyll-a and primary productivity in the model is determined by the physical and chemical-biological parameters. The horizontal distributions of the DIN, DIP and chlorophyll-a are decreased from the coast to the off-shore, though the nutrients show some more complicated pattern than the chlorophyll-a. The nutrient contents in the off-shore are low, and thus a relatively low productivity(chlorophyll-a) are presented. On the whole, the distribution of the results of model are smoother than the observed ones and some small scale variation in the observed data cannot be reproduced by the model due to the resolution limits of model. However, the basic pattern and the quantitavities has been reproduced by the model well.