• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2009

We suggest and evaluate a dynamic scheduling rule of machines and material handling systems for on-line operation in job shop type Flexible Manufacturing System. Alternating status should be able to take operation scheduling procedures and without delay in dynamic industrial environments effectively. The interaction(SPT-NS, SPT-QSNS, SPT-NUJ, EDD-NS, EDD-QSNS, EDD-NUJ, CR-NS, CR-QSNS, CR-NUJ) between machine operation scheduling and AGV dispatching rule were also studied in this research. The performance evaluation which was obtained from DSS compares the performance of Flow time, and Empty to loaded travel ratio. It is Compared with the best rules & two system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1099-1104
• /
• 1993

The real time control system for FMS(Flexible Manufacturing System) is implemented at this paper. To achieve this goal, the Colored and Timed Petri-Net model is constructed and used to simulate the real time operation of FMS. Using the Colored and Timed Petri-Net model, evaluating any kind of FMS plant is possible. On-line shceduler, intelligent dispatcher, real time monitor and the simulation model of shop floor are contructed using LAN communication, relational database system in this paper. Finally, this real time control system is applied to the FMS/CIM center at Seoul National University.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.493-497
• /
• 1991

A problem of analysis and design of asymptotically reliable serial production systems, closed with respect to the number of carriers that transport parts between operations, is addressed. A case study of a paint shop operation at a modern automobile assembly plant is described. The results obtained indicate that optimization of the system with respect to the number of carriers available and the capacity of the feedback buffer leads to a substantial improvement in the production rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.445-449
• /
• 1997

In order to provide a manufacturing system with efficiency and flexibility to cope with the changes in shop floor status, the integration of process planning and operations scheduling is required. In this paper,an integrated system of process planning and operations scheduling based on the concept of process net model is presented. The process net model includes the alternative process plans. The integrated system is applied for prismatic parts.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.370-375
• /
• 1992

This paper deals with the scheduling and simulation for FMC(Flexible Manufacturing Cells). In order to achieve CIM, there is a critical need to link factory level and machine level. The primary functions performed by this link for all jobs issued to the shop floor and cell include short-term scheduling and dynamic operational scheduling. Here, hierarchical control structure is introduced to define these functions. And Intelligent scheduling through expert module is adopted for efficiency of FMC operation. Computer simulation reveals that expert scheduling method is better than heuristics in various performance index.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.147-158
• /
• 1998

Work order and report of work performance are essential activities of work management in the shop floor. This study suggests the model for the communication methods and Information exchange systems which can enhance faultless accuracy about these informations in the client/server architecture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.461-462
• /
• 2010

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.3
• /
• pp.301-308
• /
• 2011

International Maritime Organization (IMO) proposed the Energy Efficiency Operation Indicator (EEOI) in 2005 and the Energy Efficiency Design Index (EEDI) in 2008 so as to address emission concern and regulation. Likewise, Ship Energy Efficiency Management Plan (SEEMP) and Greenhouse Gas (GHG) monitoring and management are also becoming an issue lately. This paper introduces the energy efficiency design index (operation indicator) monitoring system (EDiMS) software can continuously monitor $CO_2$, $NO_x$, $SO_x$, and PM values emitted from ship. The accurate inventory of ships GHG can be obtained from base of emission result during the engine shop test trial and the actual monitoring of shaft power and ship speed. In addition, the ability to store all exhaust emission and engine operation data can be applied as the useful tool of the inventory work of air pollution and ship energy management plan for the mitigation or reduction of ship emissions.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.146-156
• /
• 2014

This study investigated and analyzed the exhibition, education, operation, and regional linkage program around a case of the National Museum of Ethnology in Netherlands, Germany, Mexico, England, and Japan to suggest necessary directions when constructing the national museum of ethnology of Korea. Interview by visiting the site and email interview were conducted for the investigation and suggestions according to the analysis are as follows. 1) It is necessary for the exhibition program to suggest a comparison exhibition by continent, and to be specific, occupation, style of living, representational culture, religion and view of the world, relation of power, and development culture are essential for the culture contents. 2) The education program needs to be constructed based on the age and level, and specific education program was suggested in this study. 3) Managing library, restaurant, cafe, and museum shop is essential for the operation program, additional service operation was suggested to cover additional financial areas, and professional research workers and professor manpower are necessary. 4) The regional linkage program needs to be composed by considering special qualities of the country and region, and needs to satisfy the expected effect of the local community and local residents.