• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.986-993
• /
• 2011

The role of brake is safely to transport passenger & cargo and stop vehicles at emergency in railway vehicle. Brake system reduces the speed by control command of electricity or air. mechanical methods to perform brake are disk brake & tread brake. This study targeted development of highly efficient sintered alloy brake shoe in railway vehicle whose high frictional coefficient, wear resistance, compatibility of the existing tread brake shoe & minimization of wheel's thermal damage and performed development of friction material's formulation, analysis of pressure distribution in wheel tread & brake shoe, optimum form design through analysis of heat flow.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.515-528
• /
• 1995

Slips and falls are the major causes of the pedestrian injuries in the industry and the general community throughout the world. With the awareness of these problems, the friction coefficients of the interface between floorings and footwear have been measured for the evaluation of slip resistant properties. During this measurement process, the surface texture has been shown to be substantially effective to the friction mechanism between shoe heels and floor surfaces under various types of walking environment. Roughness, either of the floor surface or shoe heels, provides the necessary drainage spaces. This roughness can be designed into the shoe heel but this is inadequate in some cases, especially a wear. Therefore, it is essential that the proper roughness for the floor surface coverings should be provided. The phenomena that observed at the interface between a sliding elastomer and a rigid contaminated floor surface are very diverse and combined mechanisms. Besides, the real surface geometry is quite complicate and the characteristics of both mating surfaces are continuously changing in the process of running-in so that a finite number of surface parameters can not provide a proper description of the complex and peculiar shoe - floor contact sliding mechanism. It is hypothesised that the interface topography changes are mainly occurred in the shoe heel surfaces, because the general property of the shoe is soft in the face of hardness compared with the floor materials This point can be idealized as sliding of a soft shoe heel over an array of wedge-shaped hard asperities of floor surface. Therefore, it is considered that a modelling for shoe - floor contact sliding mechanism is mainly depended upon the surface topography of the floor counterforce. With the model development, several surface parameters were measured and tested to choose the best describing surface parameters. As the result, the asperity peak density (APD) of the floor surface was developed as one of the best describing parameters to explain the ambiguous shoe - floor interface friction mechanism. It is concluded that the floor surface should be continuously monitored with the suitable surface parameters and kept the proper level of roughness to maintain the footwear slip resistance. This result can be applied to the initial stage of design for the floor coverings.

• Journal of the Korean Home Economics Association
• /
• v.24 no.3
• /
• pp.43-50
• /
• 1986

This study is toidentify what makes people uncomfortable when people wear new shoes and to gain fundamental data for establishing shoe sizes. Data materal from the 16 measurement investigation conducted on 796 college girl students shows the following. 1) More than 96% of the subjects have experienced footache when they wore new shoes. It is significant that 45.76% of the subjects answered shoe width, especially pump-lining part cause them to feel more pain in their feet than any other measurement elements. 2) According to multiple correlation analysis to know which parts of feet determine shoe size, both multiple correlation coefficient of feet length to other parts of foot and joint girth to other parts of foot show the highest of R=0.93. 3) According to the ANOVA-tested result of estimated function when both foot-length-joint girth and foot length-joint girth-foot width are independent variables in each case, the level of α〈0.001 is very significant. 4) The comparision between KS G3116 adult women's shoe size establishment table and my table in this study reveals that the cases of more increased joint girth measurements than standard joint girth measurements in KS G 3116 table are easy to find.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.85-95
• /
• 2004

The Purpose of this study was to find a phase of clothing in Korean proverb. The results of the analysis of this research was as follows： In the case of headgear, was expose that symbolize handsomeness, conduct of life, personality that display charm and position which is not usage as only head protection. Upper wear was expressing aspect and person's similarity, and was symbolizing conduct of life by meaning of dress and its ornaments according to a person that dress displays that change. Trousers(bottom wear) was expose that it means aspect or conduct of life(a 4 case, 40％) through site. Overcoat showed that overcoat that is clothes that is symbolizing wearer's situation, aspect and wear most on face because is involved with behavior that is not right in clothes usage is used by standard that foretell personality. Underwear can know that expressed being involved with right behavior, nature by the basic clothes. I was able to know that I express an attitude of a life or a form through shoe, and the accessories won an minor order but that I have a large influence on a character or the appearance of a person. Silk fabrics expresses Position, and hemp cloth expressed by symbol that display ability. Also, silk fabrics had meaning that hint person's background. Dress and its ornaments that is used in proverb by these result can know that have function as symbolic symbol that display Person's nature or situation, aspect that is wearing clothes that is not function as only simple clothes.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.455-457
• /
• 1999

In this paper, the wearing characteristics of current collecting shoes, interruption phenomena and contact resistances between collecting shoes and conductor rails are established as design parameters for development of the third rail current collector. An experimental analysis for established design parameters is performed as the materials of current collector shoe, contact force, sliding velocity and contact condition(dry/wet condition) between current collectors shoe and conductor rails. As a result of this study, the magnitude of contact force is in proportion to the amount of wear in the collecting shoe, but is in inverse proportion to the interruption and contact resistance between the collecting shoe and the conductor rail. And optimal values of design parameters are pre sented through analyzing the experimental results of the amount of wear, interruption and contact resistance.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.16-21
• /
• 2004

Purpose: To investigate the characteristics of the patients and therapeutic shoes for diabetic patients. Materials and Methods: Forty two diabetic patients who had their own therapeutic shoes which were prescribed somewhere else were studied from March 2003 to December 2003. There were 27 males and 15 females, and the mean age was 62.1 years (range, 49-72 years). Duration of diabetes was average 14 years (range, $6{\sim}30$ years), all had type 2 diabetes. Sensation was examined with 5.07 nylon monofilament. The route of purchasing the shoes, compliance to the prescribed shoes were investigated by interview. The shape of shoe, stiffness of upper, conformity of insole to the shape of the foot were recorded. In-shoe plantar pressure was measured in 15 patients. Results: Eighteen patients were insensate to the monofilament. Seven patients did not wear the therapeutic shoes, and only 18 of 35 patients were wearing the therapeutic shoes more than 6 hours a day. The shoes of 17 patients were prescribed by medical doctor and the rest were purchased by the recommendation of acquaintances or advertisement. Ulcer recurred in four of five patients to whom the shoe was prescribed by medical doctor and the cause of three recurrences were evident by just observing the foot and shoe. The therapeutic shoes were made from 11 different makers. Eight shoes were adequate for diabetic patients with respect to the material, shape of insole, type of shoe. In-shoe plantar pressure was examined in 15 patients and was less than 300 kPa in all patients. Conclusion: The therapeutic shoes for the diabetic patients need to be prescribed by medical doctor for selective patients with neuropathy or previous history of ulcer and follow-up examination is important to monitor the compliance of the patients and adequacy of the shoes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.117-130
• /
• 2018

As women wear shoes for a long time due to aesthetic elements and working environment, many women experience discomfort and deformation in their feet due to their shoes and the production of comfortable shoes is becoming an important issue. The purpose of this study is to investigate the factors affecting the grip of shoes by foot type, shoe design, and wearing attitude of shoes. Through this, we suggest solutions for foot discomfort due to wearing shoes and help to prevent foot related diseases. The study results are as follows; first, a wide foot, square-type, and high or low arch (hollow foot or flat foot) among foot shapes influenced the fatigue and pain of feet, and big feet over 250mm-long, wide feet, square-type feet, and high-arch feet (hollow foot) had an influence on distortion and side effects. Second, among the characteristics of wearing shoes influencing foot discomfort, the higher the shoe heels were, the narrower the surface covering the feet was (pumps and mule), and the shoes with high front heels and narrow back heel area, the shoe wearer had a higher possibility of experiencing fatigue and pain and even had not only fatigue and pain but also side effects when she wore pointed shoes. Third, a shoe wearer experiences fatigue and pain if she wears shoes for a shorter period of time, stay stood while wearing shoes for a short time, and wears shoes that are bigger or smaller than the actual shoe size. Fourth, fatigue and pain experiencers and distortion and side effects experiencers all responded that they change into other shoes to deal with foot discomfort and that they directly massage their feet.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.465-474
• /
• 2015

Objective : A study and development of Korean Bobsleigh athletes's shoe which considers their physical condition has yet to be completed. So this study examines the effects of running shoes used by athletes based on plantar pressure and sprint time in order to provide raw data for the development of bobsleigh shoes suitable for Koreans. Method : The study selected seven bobsleigh athletes as subjects and selected three pairs of spiked running shoes from three companies, which will be referred to as Company N (Type A), Company A (Type B), and Company M (Type C). To analyze sprint time and plantar pressure for each shoe, the subject of the study were instructed to wear the selected shoes and to drag a sled at maximum sprint for 15 meters for 15 meters for in each condition that would be in real bobsleigh competitions. Results : The average sprint intervals for each athlete in each pair of shoes revealed Type C produce the fastest sprint in the order of Type C < Type A< Type B. Shoe Type C also had the largest contact area in order of Type C > Type B > Type A (p<.01). None of the three shoe types seem to yield a distinct advantage in terms of maximum average pressure or maximum pressure. Conclusion : In the future, functional analysis should be carried out by comparing the material properties, hardness, and toe spring of shoes based on the Type C shoe from Company M in order to develop bobsleigh shoes suitable for Koreans.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.30-35
• /
• 2014

The pumps of electro-hydrostatic actuators operate most frequently in boundary lubrication speed range, as they compensate for the position control errors as a control element. When conventional swash plate type piston pumps are applied to electro-hydrostatic actuators, the frictional power losses as well as the wear rate of sliding components, such as piston shoes can increase drastically under the boundary friction condition. In this paper, the power losses of the piston shoes were investigated which were engendered by a frictional solid-to-solid contact and leakage flow rate of their hydrostatic bearing. In order to reduce them, DLC-coating was applied to the swash plate and the ball joint of pistons along with its effects were demonstrated. In addition, it was also shown that the wear rate of the piston shoes could be markedly reduced using the DLC-coated swash plate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1019-1025
• /
• 2022

In recent years, the number of foot disease patients due to bad walking habits and living environment is increasing. We examine how patients with mild foot disease according to shoe design characteristics affect satisfaction and purchase intention when purchasing orthopedic shoes. The design characteristics of shoes consisted of functionality, convenience, and aesthetics. It was found that aesthetics had an effect on purchasing orthopedic shoes. Even if the factors of functionality and convenience have little effect, if the aesthetic is high, purchase intention and satisfaction are affected. Various elements are required for design according to the frequency of participation in social activities for each mild foot disease and the purpose of wearing it. It is expected that the development of useful orthopedic shoe designs that patients with mild foot disease can wear in their daily life will lead to practical application and satisfaction by further supplementing the characteristic factors of orthopedic shoe design identified through the research results.