• 제목/요약/키워드: Shock-induced Detonation

검색결과 20건 처리시간 0.026초

외부 충격에 의한 손상을 고려한 화약과 추진제의 폭발모델 개발 (Development of Explosion Model of Energetic Materials Considering Shock to Detonation Transition and Damage by External Impact)

  • 김보훈;여재익
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.97-99
    • /
    • 2012
  • A pressure-based BOIK model considering Shock to Detonation Transition(SDT) and damage due to external fragment or bullet stimuli impact on energetic materials and analytical approach for determination of free parameters are proposed. The rate of product mass fraction(${\lambda}$) consists of ignition term that represents the initiation due to shock compression and growth term that describes propagation of detonation wave and strain term representing the morphological deformation induced by external impact.

  • PDF

초음속 연소 탄체 가속기 내의 폭굉파 진행에 관한 수치해석 (Numerical Analysis of Detonation Wave Propagation in SCRam-Accelerator)

  • 최정열;정인석;이수갑
    • 한국연소학회지
    • /
    • 제1권1호
    • /
    • pp.83-91
    • /
    • 1996
  • A numerical study is carried out to examine the ignition and propagation process of detonation wave in SCRam-accelerator operating in superdetonative mode. The time accurate solution of Reynolds averaged Navier-Stokes equations for chemically reacting flow is obtained by using the fully implicit numerical method and the higher order upwind scheme. As a result, it is clarified that the ignition process has its origin to the hot temperature region caused by shock-boundary layer interaction at the shoulder of projectile. After the ignition, the oblique detonation wave is generated and propagates toward the inlet while constructing complex shock-shock interaction and shock-boundary layer interaction. Finally, a standing oblique detonation wave is formed at the conical ramp.

  • PDF

Three-Dimensional Numerical Analysis for Detonation Propagating in Circular Tube

  • Sugiyama, Yuta;Matsuo, Akiko
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.364-370
    • /
    • 2008
  • Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable and unstable pitch modes for the lower and higher activation energies, respectively. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of two modes. The maximum pressure history in the stable pitch remained nearly constant, and the single Mach leg existing on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the unstable pitch due to the generation and decay of complex Mach interaction on the shock front shape. The high frequency oscillation was self-induced because the intensity of the transverse wave was changed during propagation in one cycle. The high frequency behavior was not always the same for each cycle, and therefore the low frequency oscillation was also induced in the pressure history.

  • PDF

Mechanisms of Oblique Shock-Induced Combustion Instability

  • Choi, Jeong-Yeol;Jeung, In-Seuck
    • 한국연소학회지
    • /
    • 제7권1호
    • /
    • pp.23-30
    • /
    • 2002
  • Instability of oblique detonation waves (ODW) at off-attaching condition was investigated through a series of numerical simulations. Two-dimensional wedge of finite length was considered in $H_2/O_2/N_2$ mixtures at superdetonative condition. Numerical simulation was carried out with a compressible fluid dynamics code and a detailed hydrogen-oxygen combustion mechanism. Present result reveals that there is a chemical kinetic limit of the ODW detachment, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. Result also presents that ODW still attaches at a wedge as an oblique shock-induced flame showing periodically unstable motion, if the Rankine-Hugoniot limit of detachment is satisfied but the chemical kinetic limit is not. Mechanism of the periodic instability is considered as interactions of shock and reaction waves coupled with chemical kinetic effects. From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of the Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

  • PDF

에틸렌-공기 혼합물에서 벽면 온도 감소에 의한 연소폭발천이 현상 변화 (The change of deflagration to detonation transition by wall cooling effect in ethylene-air mixture)

  • 곽민철;김기홍;여재익
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.457-462
    • /
    • 2011
  • 본 연구에서는 에틸렌-공기 혼합물에서의 충격파에 의해 유도되는 화염폭발천이현상을 수치적 계산을 통하여 살펴본다. 연구에 사용된 모델은 점성력, 열전단, 몰질량 확산, 그리고 화학 반응을 고려한 Navier-Stokes 방정식으로 관 내부 유동을 해석하였다. 반복되는 압력파와 화염의 상호 작용에 의해 발생되는 화염의 불안정성에 의해 화염면이 증가하게 되는데 이를 통해 화학 반응률의 증가와 더불어 연소열의 상승하게 된다. 이러한 과정들이 반복되면서 발생할 수 있는 연소폭발천이 현상을 벽면 온도 조건의 변화(단열조건과 일정한 온도 조건)에 따라 어떻게 변화 되는지를 모델링하였다.

  • PDF

파이로테크닉 착화기의 충격파 전달에 의한 폭굉 반응 해석 (Hydrodynamic Analysis on Shock-induced Detonation in Pyrotechnic Initiator)

  • 김보훈;강원규;장승교;여재익
    • 한국추진공학회지
    • /
    • 제20권5호
    • /
    • pp.19-30
    • /
    • 2016
  • 파이로테크닉 착화기의 충격파 전달에 의한 폭굉 반응을 해석하기 위하여 고폭약의 폭압 발달 및 비반응 물질의 압력 감쇠 현상을 연동하여 모사할 수 있는 하이드로다이나믹 솔버를 구성하였다. 본 연구에서는 소량의 시약으로 기폭 판단이 가능한 SSGT의 시험 및 전산모사를 수행하여 97.5% RDX로 구성된 수폭약의 충격에 대한 점화 민감도를 정량화하였다. 파이로테크닉 착화기를 형상화 한 여폭약(HNS+HMX) - 격벽(STS) - 수폭약(RDX)으로 구성된 TBI 화약 트레인을 고려하여 충격파 전달을 해석함으로써 반응 및 비반응 물질 간 상호작용에 의한 임계 격벽 두께 및 기폭 압력 간의 관계를 규명하고, 소형 파이로 착화기의 작동특성을 검증하였다.

쐐기 및 원추 주위의 불안정한 충격파 유도연소 해석 (Analysis of Unstable Shock-Induced Combustion over Wedges and Conical Bodies)

  • Jeong-Yeol Choi
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
    • /
    • pp.32-33
    • /
    • 2003
  • Mechanism of a periodic oscillation of shock-induced combustion over a two- dimensional wedges and axi-symmetric cones were investigated through a series of numerical simulations at off-attaching condition of oblique detonation waves(ODW). A same computational domain over 40 degree half-angle was considered for two-dimensional and axi-symmetric shock-induced combustion phenomena. For two-dimensional shock-induced combustion, a 2H2+02+17N2 mixture was considered at Mach number was 5.85with initial temperature 292 K and initial pressureof 12 KPa. The Rankine-Hugoniot relation has solution of attached waves at this condition. For axi-symmetric shock-induced combustion, a H2+2O2+2Ar mixture was considered at Mach number was 5.0 with initial temperature 288 K and initial pressure of 200 mmHg. The flow conditions were based on the conditions of similar experiments and numerical studies.[1, 3]Numerical simulation was carried out with a compressible fluid dynamics code with a detailed hydrogen-oxygen combustion mechanism.[4, 5] A series of calculations were carried out by changing the fluid dynamic time scale. The length wedge is varied as a simplest way of changing the fluid dynamic time scale. Result reveals that there is a chemical kinetic limit of the detached overdriven detonation wave, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. At the off-attaching condition of ODW the shock and reaction waves still attach at a wedge as a periodically oscillating oblique shock-induced combustion, if the Rankine-Hugoniot limit of detachment isbut the chemical kinetic limit is not.Mechanism of the periodic oscillation is considered as interactions between shock and reaction waves coupled with chemical kinetic effects. There were various regimes of the periodicmotion depending on the fluid dynamic time scales. The difference between the two-dimensional and axi-symmetric simulations were distinct because the flow path is parallel and uniform behind the oblique shock waves, but is not behind the conical shock waves. The shock-induced combustion behind the conical shockwaves showed much more violent and irregular characteristics.From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

  • PDF

선형화약 파이로 충격파 전파 예측을 위한 다채널 동시 레이저 충격파 센싱 시스템 개발 (Development of Multi-channel Simultaneous Laser Shock Sensing System for Linear Explosive-induced Pyroshock Propagation Prediction)

  • 장재경;;이정률
    • 한국추진공학회지
    • /
    • 제19권5호
    • /
    • pp.46-51
    • /
    • 2015
  • 선형 화약 폭발의 전파 특성예측을 위해 다채널 동시 충격파 센싱 시스템을 개발하였다. 개발된 시스템은 펄스 레이저를 이용하여 초당 1000점에서 충격파 생성이 가능하며, 접촉식 센서를 이용하여 15개 채널에서 동시에 충격파 획득이 가능하다. 특히, 선형 화약의 폭파 시간에 상응한느 각 채널의 시간 지연을 사용자 요구에 따라 적절하게 적용할 수 있는 능력을 갖춤으로써 다양한 선형 화약의 폭발에 의한 충격파 전파를 예측할 수 있을 것으로 기대된다.

극초음속 추진과 관련된 초음속 연소 현상의 수치적 검증 (Computational Validation of Supersonic Combustion Phenomena associated with Hypersonic Propulsion)

  • 최정열;정인석;윤영빈
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1998년도 춘계 학술대회논문집
    • /
    • pp.117-122
    • /
    • 1998
  • A numerical study is carried out to investigate the transient process of combustion phenomena associated with hypersonic propulsion devices. Reynolds averaged Navier-Stokes equations for reactive flows are used as governing equations with a detailed chemistry mechanism of hydrogen-air mixture and two-equation SST turbulence modeling. The governing equations are discretized by a high order accurate upwind scheme and solved in a fully coupled manner with a fully implicit time accurate method. At first, oscillating shock-induced combustion is analyzed and the comparison with experimental result gives the validity of present computational modeling. Secondly, the model ram accelerator experiment was simulated and the results show the detailed transient combustion mechanisms. Thirdly, the evolution of oblique detonation wave is simulated and the result shows transient and final steady state behavior at off-stability condition. Finally, shock wave/boundary layer interaction in combustible mixture is studied and the criterion of boundary layer flame and oblique detonation wave is identified.

  • PDF

On the Use of Standing Oblique Detonation Waves in a Shcramjet Combustor

  • Fusina, Giovanni;Sislian, Jean P.;Schwientek, Alexander O.;Parent, Bernard
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.671-686
    • /
    • 2004
  • The shock-induced combustion ramjet (shcramjet) is a hypersonic airbreathing propulsion concept which over-comes the drawbacks of the long, massive combustors present in the scramjet by using a standing oblique detonation wave (a coupled shock-combustion front) as a means of nearly instantaneous heat addition. A novel shcramjet combustor design that makes use of wedge-shaped flameholders to avoid detonation wave-wall interactions is proposed and analyzed with computational fluid dynamics (CFD) simulations in this study. The laminar, two-dimensional Navier-Stokes equations coupled with a non-equilibrium hydrogen-air combustion model based on chemical kinetics are used to represent the physical system. The equations are solved with the WARP (window-allocatable resolver for propulsion) CFD code (see: Parent, B. and Sislian, J. P., “The Use of Domain Decomposition in Accelerating the Convergence of Quasihyperbolic Systems”, J. of Comp. Physics, Vol. 179, No. 1,2002, pages 140-169). The solver was validated with experimental results found in the literature. A series of steady-state numerical simulations was conducted using WARP and it was deter-mined by means of thrust potential calculations that this combustor design is a viable one for shcramjet propulsion: assuming a shcramjet flight Mach number of twelve at an altitude of 36,000 m, the geometrical dimensions used for the combustor give rise to an operational range for combustor inlet Mach numbers between six and eight. Different shcramjet flight Mach numbers would require different combustor dimensions and hence a variable geometry system in or-der to be viable.

  • PDF