• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.147-154
• /
• 2001

The underwater explosion shock test is performed for the evaluation of the shock-resistant capability which is a very critical factor considering the survivability of the battle ship. Some measured signals have impulsive noise and gaussian white noise because of the unstable power supply system and the transient movement of cables during the underwater explosion shock test. The advanced shock signal analysis method which remove the noise of measured signal using the threshold policy of the median filter and the orthogonal wavelet coefficients are proposed. It is verified that the signal-to-noise ratio was improved about 30㏈ by the numerical simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.117-122
• /
• 2001

The shock test of shipboard equipments is performed for the evaluation of the shock-resistant. capability by analyzing the maximum acceleration, the effective time duration and the shock response spectrum, etc. But some measured signals have impulsive noise and gaussian white noise because of the ambient noise, the acquisition equipment error and the transient movement of cables during the shock test. The improved transient signal analysis method which removes the noise of measured signal using the threshold policy of the median filter and the orthogonal wavelet coefficients is proposed. It was verified that the signal-to-noise ratio was improved about 30dB by the numerical simulation. And the shock response spectrum was extracted using the denoised shock response signal which was applied by this proposed method.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.4
• /
• pp.263-268
• /
• 2017

Objective: The purpose of this study was to show differences in impact variables between treadmills with (treadmills B, C, and D) and treadmills without a shock-absorbing function (treadmill A) to propose the development of a treadmill with improved or added shock-absorbing function to reduce impact shock. Method: Thirteen male students in their twenties who had habitual rear foot strike during running ran on four treadmills at 2.67 m/sec while ankle and neck acceleration data were collected. The magnitude of the ankle and neck acceleration peaks and peak positive ankle acceleration were calculated. The power spectral density of each signal was calculated to transform the ankle and neck accelerations in the frequency domain. Results: The peak positive ankle acceleration on treadmill B was significantly lesser than that on treadmills A and D, and that on treadmill C was significantly less than that on treadmill A (p < .01). Peak positive neck acceleration was not statistically different between the treadmills. The frequencies of the peak power of the ankle and neck acceleration signal within the lower and higher frequency ranges were not statistically different between the treadmills. The signal power magnitude of the ankle in higher frequency ranges on treadmill B was significantly less than that on treadmills A, C, and D (p < .01). The signal power magnitude of the ankle in higher frequency ranges was not statistically different between the treadmills. The signal power magnitudes of the neck acceleration signal within the lower and higher frequency ranges were not statistically significantly different between the treadmills. Conclusion: Our results indicate that the shock-absorbing function of a treadmill plays a role in reducing impact shock. Therefore, in future treadmill development, shock-absorbing function should be improved or incorporated to reduce impact shock to the body.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.342-348
• /
• 2018

The important issue of equipment installed in maritime weapon system is shock survivability against underwater explosion(UNDEX). If the shock survivability of equipment should not be guaranteed, the successful mission also could not be achieved. For that reason, the shock-resistance of each equipment under UNDEX environment should be demonstrated before deployment at combat field. However, the actual UNDEX test on the ocean is too expensive to conduct. Also, it has diverse dangerous factors. The main characteristic of UNDEX is a dual-pulse shock. The vertical shock test machine able to simulate dual pulse shock signal on the ground will be introduced in this paper. The dual-pulse shock signal presented in certain shock standard was achieved with this shock-test machine on the ground. The analytical procedure to set a test condition was verified by comparing simulation result with experiment result.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2015

Objective : The purpose of this study was to determine the differences in the head and tibial acceleration signal magnitudes, and their powers and shock attenuations between flat-footed and normal-footed running. Methods : Ten flat-footed and ten normal-footed subjects ran barefoot on a treadmill with a force plate at 3.22m/s averaged from their preferred running speed using heel-toe running pattern while the head and tibial acceleration in the vertical axis data was collected. The accelerometers were sampled at 2000 Hz and voltage was set at 100 mv, respectively. The peak magnitudes of the head and tibial acceleration signals in time domain were calculated. The power spectral density(PSD) of each signal in the frequency domain was also calculated. In addition to that, shock attenuation was calculated by a transfer function of the head PSD relative to the tibia PSD. A one-way analysis of variance was used to determine the difference in time and frequency domain acceleration variables between the flat-footed and normal-footed groups running. Results : Peaks of the head and tibial acceleration signals were significantly greater during flat-footed group running than normal-footed group running(p<.05). PSDs of the tibial acceleration signal in the lower and higher frequency range were significantly greater during flat-footed running(p<.05), but PSDs of the head acceleration signal were not statistically different between the two groups. Flat-footed group running resulted in significantly greater shock attenuation for the higher frequency ranges compared with normal-footed group running(p<.05). Conclusion : The difference in impact shock magnitude and frequency content between flat-footed and normal-footed group during running suggested that the body had different ability to control impact shock from acceleration. It might be conjectured that flat-footed running was more vulnerable to potential injury than normal-footed running from an impact shock point of view.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.443-451
• /
• 2015

This paper proposes a signal modelling method that can effectively detect the shock wave(SW) sound and muzzle blast(MB) sound from the gunshot of a small arm rifle. In order to localize a counter sniper in battlefield, an accurate detection of both shock wave sound and muzzle blast sound are the necessary keys in estimating the direction and the distance of the counter sniper. To verify the performance of the proposed algorithm, a real gunshot sound in a domestic military shooting range was recorded and analyzed. From the experimental results, the proposed signal modelling method was found to be superior to the comparative system more than 20% in a shock wave detection and 5% in a muzzle blast detection, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.65-71
• /
• 2005

Pyro-shock measurement system in launch vehicle is necessary to validate structural robustness and to prepare environmental qualification criteria for launch vehicle systems. This paper describes design, development and function test of prototype pyro-shock recorder to be employed on KSLV-I in the near future. Due to the limitation of telemetry transmission rate, pyro-shock recorder acquires and stores the shock sensor data with high sampling rate in short period and sends the data to the KSLV-I telemetry system with lower data rate. Signal conditioning in pyro-shock recorder is designed to enhance signal-to-noise ratio through proper placement of anti-aliasing filter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.487-488
• /
• 2009

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.5
• /
• pp.175-182
• /
• 2009

We extracted protein signal delivery path from protein interaction data, using location information and weight of protein. We obtained the protein interaction data by experimenting in two-hybrid system using Yeast. We simulated function's data of Hypotonic Shock comparing to signal delivery path provided in KEGG from the results. We measured process running period as well. In future, this research can be key to discover the origin of various genetic diseases and develop treatment.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.66-74
• /
• 2003

In non-contact underwater explosion shock test of a real naval ship, measurement of shock loadings and responses should require onboard system to be able to safely trigger an explosive and to simultaneously and successfully measure scores of shock signals in the deteriorated environment. For this purpose, we have developed a shock-hardened measurement system resistible to 170g peak acceleration having 4 msec duration by resiliently mounting general purpose measurement instruments in racks. The system can simultaneously measure and record 200 signals to evaluate shock leadings and responses of the test ship by triggering an explosive and measurement instruments at the same time. We prove the performance of the developed system by introducing the signal acquisition results from of a real ship underwater shock test, firstly performed in Korea.