• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.68-71
• /
• 2004

The experiments for NACA airfoils are conducted as the preliminary study for the aerodynamic characteristics of the transonic airfoil flow in the shock tube. The test section configurations were designed to use shock tube as simple and less costly experimental facility generating transonic flow at relatively high Reynolds numbers. Experiments at hot gas Mach numbers of 0.80, 0.82 and 0.84, Reynolds numbers of about $1.2\times10^6$ on airfoil chord length and angle of attack of $0^{\circ}\;and\;2^{\circ}$ were carried out by means of shadowgraph visualization method and static pressure measurements. Visualization results were compared with the corresponding results from the conventional transonic wind tunnel tests. The results of study showed that present shock tube facility is useful to study the proper performance characteristics in transonic Mach number range.

• 소음진동
• /
• 제11권2호
• /
• pp.241-248
• /
• 2001

The present paper describes experimental and computational work to augment the magnitude of the impulsive wave. An experiment was performed using a simple shock tube with an open end and numerical calculations were carried out to solve the unsteady, axisymmetric, inviscid, compressible governing equations. The control strategy applied was to alter the exit geometry of a straight tube to a sudden enlargement tube and a flare tube. The effects of the configurations of the tube exit on the magnitude of the impulsive wave were investigated over the range of the weak shock Mach number from 1.01 to 1.10. The results obtained were compared to those of the straight tube tests. The numerical result predicted the magnitude of the experimented impulsive waves with a good accuracy. The present passive control technique enabled the magnitude of the impulsive wave to augment by about 23 percent, compared to that of the straight tube of no control.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.11-16
• /
• 2006

충격파관을 이용하여 NACA와 이중쐐기 날개 주변의 천음속 유동에 대한 실험적 연구가 수행되었다. 벽면효과와 반사충격파의 영향을 최소화하기 위해 슬랏벽과 챔버를 가지는 실험부가 설계되었으며 이를 통해 충격과관을 비교적 높은 레이놀즈수의 천음속 유동을 발생시키는 간단하고 경제적인 풍동장치로 이용하고자 하였다. 열기류 마하수 0.80~0.84, 레이놀즈수 약 $1.2{\times}10^6$ 받음각 $0^{\circ}$ 와 $2^{\circ}$의 유동 조건에서의 천음속 날개 유동은 섀도우그래프법에 의해 가시화되었다. 날개 주변의 충격파 분포는 기존의 일반 천음속 풍동 실험의 결과와 비교되었다. 실험결과는 본 실험에 사용된 충격파관은 실험 마하수 범위와 날개에 대해 천음속 풍동으로서의 유효한 성능 특성을 나타내었다.

• Advances in materials Research
• /
• 제6권2호
• /
• pp.155-168
• /
• 2017

The terrorist attacks and dangers by bomb blast have turned into an emerging issue throughout the world and the protection of the people and structures against terrorist acts depends on the prediction of the response of structures under blast and shock load. In this paper, behavior of aluminum and unidirectionally reinforced E-Glass Epoxy composite plates with and without focal circular holes subjected to shock loading has been identified. For isotropic and orthotropic plates (with and without holes) the classical normal mode approach has been utilized as a part of the processing of theoretical results. To obtain the accurate results, convergence of the results was considered and a number of modes were selected for plate with and without hole individually. Using a shock tube as a loading device, tests have been conducted to composite plates to verify the theoretical results. Moreover, peak dynamic strains, investigated by experiments are also compared with the theoretical values and deviation of the results are discussed accordingly. The strain-time histories are likewise indicated for a specific gauge area for aluminum and composite plates. Comparison of dynamic-amplification factors between the isotropic and the orthotropic plates with and without hole has been discussed.

• 한국가시화정보학회지
• /
• 제22권3호
• /
• pp.13-20
• /
• 2024

The stability of platinum-carbon nanoparticles (Pt-C NPs) under shock wave loading conditions is examined in this work to evaluate its possible use in aeronautical applications. Our analysis of the optical, structural, and compositional features of Pt-C NPs was conducted using X-Ray diffraction Spectroscopy (XRD), Scanning Electron Microscopy with energy-dispersive X-ray Spectroscopy (SEM-EDS), and Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-DRS). No notable changes were noticed in the following parameters following shock wave exposure: absorbance spectra, band gap energies, surface morphology, microstrain, grain size, dislocation density, or reflectance profiles. These results demonstrate the strength of Pt-C NPs and prove that they are appropriate for demanding aerospace settings where dependability and longevity are critical.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2919-2924
• /
• 2011

자동서랍함용 완충기는 서랍을 여닫을 때 충격을 흡수하고 속도를 조절하는 역할을 해 준다. 완충기 튜브는 완충기의 구성품을 에워 쌓고 있는 원통 모양의 케이스이며 아세탈 재질로 되어있다. 본 연구는 사출 성형 공정에서 제작된 완충기 튜브의 품질 안정성을 평가하는 데 목적이 있다. 완충기 튜브는 4 캐비티 냉각장치를 갖춘 사출 성형공정에서 제작된다. 본 연구에서는 완충기 튜브의 품질 안정을 판단하기 위해 분석과 시험이 수행되었다. 분석과 시험은 컴퓨터 시뮬레이션을 통한 품질 분석과 연구된 튜브에 대한 외산품과의 성능 비교 시험이다. 사출 압력은 87.6 MPa로, 전체 휨량은 0.07~1.0 mm로 계산하였다. 연구된 튜브와 외산품을 비교해 볼 때 튜브의 최대 압축-하중은 231 kgf, 구간별 변위-하중은 0.05 kgf, 그리고 또 튜브 내경의 표면거칠기(Ra)는 $0.02\;{\mu}m$ 향상되었다. 결과적으로 사출 성형 공정에서 제작되어지는 연구된 튜브의 품질은 안정되었고 성능이 우수함을 알 수 있었다.

• 천문학회보
• /
• 제37권2호
• /
• pp.101.1-101.1
• /
• 2012

Building a relativistic magnetohydrodynamic (RMHD) code based on upwind schemes has been a challenging project, because of the absence of analytic expressions of eigenvalues and eigenvectors. We found analytic expressions of eigenvalues and eigenvectors for adiabatic RMHD flows which are relatively simple and manageable. Especially, our eigenvectors can handle all degenerate points. Using these analytic forms, we built a code based on the total variation diminishing (TVD) scheme, and successfully performed one-dimensional shock tube tests.

• 오토저널
• /
• 제13권3호
• /
• pp.32-42
• /
• 1991

In SI engine research the pressure data in cylinder is the most important fundamental ones leading to engine efficiencies and performances. It is, therefore, necessary to obtain accurate pressure data and yet it is often impossible to install a reliable data producing, flush-mounted type pressure transducer in a cylinder of small and medium size multicylinder SI engines. When flush mounting the transducer is not possible, the spark-plug type pressure transducer is commonly used as an alternative. In this case, the transmission tube of spark-plug type pressure transducer introduces distortions in the pressure signal. Efforts were made to understand the dynamic characteristics of spark-plug pressure transducer by shock tube tests and real engine experiments. In engine experiment the cylinder pressure data were simultaneously obtained by both flush mounted and spark-plug type pressure transducers of certain transmission tube geometry. Those pressure data collected by spark-plug type pressure transducer were tested for correction to flush mounted ones by the application of transfer function. As a result of the calibration the IMEP difference between F/M data and improved S/P data was shown to be corrected about 75-98% from the original ones.

• 천문학회지
• /
• 제27권1호
• /
• pp.13-29
• /
• 1994

We have constructed a 3-dim hydrodynamics code called BTSPH. The fluid dynamics part of the code is based on the smoothed particle hydrodynamics (SPH), and for its Poisson solver the binary tree (BT) scheme is employed. We let the smoothing length in the SPH algorithm vary with space and time, so that resolution of the calculation is considerably enhanced over the version of SPH with fixed smoothing length. The binary tree scheme calculates the gravitational force at a point by collecting the monopole forces from neighboring particles and the multipole forces from aggregates of distant particles. The BTSPH is free from geometric constraints, does not rely on grids, and needs arrays of moderate size. With the code we have run the following set of test calculations: one-dim shock tube, adiabatic collapse of an isothermal cloud, small oscillation of an equilibrium polytrope of index 3/2, and tidal encounter of the polytrope and a point mass perturber. Results of the tests confirmed the code performance.

• 천문학회보
• /
• 제36권1호
• /
• pp.55.2-55.2
• /
• 2011

Many astrophysical high energy phenomena involve relativistic flows. We describe codes for adiabatic and isothermal flows in relativistic regimes. For adiabatic flows, we employ an equation of state (EOS) which is simple and yet approximates very closely the EOS of the single-component perfect gas. For isothermal flows, we use an EOS of constant sound speed. We present the eigenstructures of relativistic hydrodynamics which can be used to build numerical codes, and discuss the calculation of primitive variables from conservative ones for both adiabatic and isothermal flows. The shock tube tests show differences between the two flows.