Browse > Article
http://dx.doi.org/10.12989/amr.2017.6.2.155

Aluminum and E-glass epoxy plates behavior subjected to shock loading  

Muhit, Imrose B. (School of Civil and Environmental Engineering, Chung-Ang University)
Sakib, Mostofa N. (Institute of Water and Flood Management, Bangladesh University of Engineering and Technology)
Ahmed, Sheikh S. (Department of Civil Engineering, University of Asia Pacific)
Publication Information
Advances in materials Research / v.6, no.2, 2017 , pp. 155-168 More about this Journal
Abstract
The terrorist attacks and dangers by bomb blast have turned into an emerging issue throughout the world and the protection of the people and structures against terrorist acts depends on the prediction of the response of structures under blast and shock load. In this paper, behavior of aluminum and unidirectionally reinforced E-Glass Epoxy composite plates with and without focal circular holes subjected to shock loading has been identified. For isotropic and orthotropic plates (with and without holes) the classical normal mode approach has been utilized as a part of the processing of theoretical results. To obtain the accurate results, convergence of the results was considered and a number of modes were selected for plate with and without hole individually. Using a shock tube as a loading device, tests have been conducted to composite plates to verify the theoretical results. Moreover, peak dynamic strains, investigated by experiments are also compared with the theoretical values and deviation of the results are discussed accordingly. The strain-time histories are likewise indicated for a specific gauge area for aluminum and composite plates. Comparison of dynamic-amplification factors between the isotropic and the orthotropic plates with and without hole has been discussed.
Keywords
aluminum; blast; composite plate; dynamic-amplification factor, epoxy plate; isotropic plate; orthotropic plate; shock load; shock tube;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Pack, D.C. (1957), "The reflection and transmission of shock waves I: The reflection of a detonation wave at a boundary", Philosoph. Mag., 2(14), 182-188.   DOI
2 Rajamani, A. and Prabhakaran, R. (1977a), "Dynamic response of composite plates with cut-outs, part I: Simply-supported plates", J. Sound Vibr., 54(4), 549-564.   DOI
3 Rajamani, A. and Prabhakaran, R. (1977b), "Dynamic response of composite plates with cut-outs, part II: Clamped-clamped plates", J. Sound Vibr., 54(4), 565-576.   DOI
4 Rajamani, A. and Prabhakaran, R. (1980), "Response of composite plates to blast loading", Exper. Mech., 20(7), 245-250.   DOI
5 Ramajeyathilagam, K., Vendhan, C.P. and Rao, V.B. (2000), "Non-linear transient dynamic response of rectangular plates under shock loading", J. Imp. Eng., 24(10), 999-1015.   DOI
6 Reddy, J.N. (1983), "Geometrically nonlinear transient analysis of laminated composite plates", AIAA J., 21(4), 621-629.   DOI
7 Redekop, D. (1994), "Dynamic response of a toroidal shell panel to blast loading", Comput. Struct., 51(3), 235-239.   DOI
8 Redekop, D. and Azar, P. (1991), "Dynamic response of a cylindrical shell panel to explosive loading", J. Vibr. Acoust., 113(3), 273-278.   DOI
9 Shabana, A.A. (1996), Forced Vibration, Theory of Vibration: An Introduction, Springer, New York, U.S.A.
10 Shim, C., Lee, P. and Chang, S. (2001), "Design of shear connection in composite steel and concrete bridges with precast decks", J. Constr. Steel Res., 57(3), 203-219.   DOI
11 Yun, N.R., Park, S.D., Muhit, I.B. and Shim, C.S. (2014), "Impact tests on aluminum foams", Proceedings of the 4th International Technical Conference, Seoul, Korea, November.
12 Shim, C., Yun, N., Yu, R. and Byun, D. (2012), "Mitigation of blast effects on protective structures by aluminum foam panels", Metal., 2(2), 170-177.   DOI
13 Turkmen, H.S. (1998), "Dynamic response of laminated composite panels subjected to blast loading", Ph.D. Dissertation, Istanbul Technical University.
14 Turkmen, H.S. (2002), "Structural response of laminated composite shells subjected to blast loading: Comparison of experimental and theoretical methods", J. Sound Vibr., 249(4), 663-678.   DOI
15 UFC (2008), Structures to Resist the Effects of Accidental Explosions, Unified Facilities Criteria, United States Army, US Government Printing Office, Washington, U.S.A.
16 Upadhyay, A.K., Pandey, R. and Shukla, K.K. (2011), "Nonlinear dynamic response of laminated composite plates subjected to pulse loading", Commun. Nonlin. Sci. Numer. Simulat., 16(11), 4530-4544.   DOI
17 Uyaner, M. and Kara, M. (2007), "Dynamic response of laminated composites subjected to low-velocity impact", J. Compos. Mater., 41(24), 2877-2896.   DOI
18 Wang, Y., Xu, C., Wan, Y., Li, J., Yu, H. and Ren, L. (2016), "A modal approach for the efficient analysis of a bionic multi-layer sound absorption structure", Steel Compos. Struct., 21(2), 249-266.   DOI
19 Wiernicki, C.J., Liem, F., Woods, G.D. and Furio, A.J. (1991), "Structural analysis methods for lightweight metallic corrugated core sandwich panels subjected to blast loads", Naval Eng. J., 103(3), 192-202.   DOI
20 Abdelhak, Z., Hadji, L., Daouadji, T. and Bedia, E. (2015), "Thermal buckling of functionally graded plates using an-order four variable refined theory", Adv. Mater. Res., 4(1), 31-44.   DOI
21 Ancy, A. and Parvathy, U. (2016), "Thermal buckling behaviour of functionally graded plates", Appl. Mech. Mater., 857, 279-284.   DOI
22 Aslan, Z., Karakuzu, R. and Sayman, O. (2002), "Dynamic characteristics of laminated woven E-glassepoxy composite plates subjected to low velocity heavy mass impact", J. Compos. Mater., 36(21), 2421-2442.   DOI
23 Bathe, K.J. and Wilson, E.L. (1986), Numerical Methods in Finite Element Analysis, Englewood Cliffs, Prentice-Hall.
24 Daouadji, T.H., Benferhat, R. and Adim, B. (2016), "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load", Adv. Mater. Res., 5(2), 107-120.   DOI
25 Carvalho, A. and Soares, C.G. (1996), "Dynamic response of rectangular plates of composite materials subjected to impact loads", Compos. Struct., 34(1), 55-63.   DOI
26 Daniel, A.J. and Dubey, R.N. (2015), "Finite element simulation of earthquake resistant brick masonry building under shock loading", Adv. Struct. Eng., 1027-1038.
27 Daouadji, T.H. and Adim, B. (2016), "An analytical approach for buckling of functionally graded plates", Adv. Mater. Res., 5(3), 141-169.   DOI
28 Dewey, J.M. (2001), Expanding Spherical Shocks (Blast Waves), Handbook of Shock Waves, Academic Press, Burlington, 441-481.
29 Dhiraj, V.S., Jadvani, N. and Kalita, K. (2016), "Stress and strain analysis of functionally graded plates with circular cutout", Adv. Mater. Res., 5(2), 81-92.   DOI
30 Ebrahimi, F., Ehyaei, J. and Babaei, R. (2016), "Thermal buckling of FGM nanoplates subjected to linear and nonlinear varying loads on Pasternak foundation", Adv. Mater. Res., 5(4), 245-261.   DOI
31 Gupta, A.D., Gregory, F.H., Bitting, R.L. and Bhattacharya, S. (1987), "Dynamic analysis of an explosively loaded hinged rectangular plate", Comput. Struct., 26(1-2), 339-344.   DOI
32 Hebali, H., Bakora, A., Tounsi, A. and Kaci, A. (2016), "A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates", Steel Compos. Struct., 22(3), 473-495.   DOI
33 Hosseini, S.A., Abolbashari, M.H. and Hosseini, S.M. (2016), "Generalized coupled non-Fickian/non-Fourierian diffusion-thermoelasticity analysis subjected to shock loading using analytical method", Struct. Eng. Mech., 60(3), 529-545.   DOI
34 Kazanci, Z. and Mecitoglu, Z. (2006), "Nonlinear damped vibrations of a laminated composite plate subjected to blast load", AIAA J., 44(9), 2002-2008.   DOI
35 Kumari, E. and Singha, M. (2017), "Nonlinear response of laminated panels under blast load", Proc. Eng., 173, 539-546.   DOI
36 Librescu, L. and Nosier, A. (1990), "Response of laminated composite flat panels to sonic boom and explosive blast loadings" AIAA J., 28(2), 345-352.   DOI
37 Librescu, L., Oh, S.Y. and Hohe, J. (2004), "Linear and non-linear dynamic response of sandwich panels to blast loading", Compos. Part B: Eng., 35(6-8), 673-683.   DOI
38 Liou, W., Tseng, C. and Chao, L. (1996), "Stress analysis of laminated E-glass epoxy composite plates subject to impact dynamic loading", Comput. Struct., 61(1), 1-11.   DOI
39 Louca, L.A., Pan, Y.G. and Harding, J.E. (1998), "Response of stiffened and unstiffened plates subjected to blast loading", Eng. Struct., 20(12), 1079-1086.   DOI
40 Mazek, S.A. and Wahab, M.M. (2015), "Impact of composite materials on buried structures performance against blast wave", Struct. Eng. Mech., 53(3), 589-605.   DOI
41 Moradipour, P., Chan, T.H. and Gallag, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., 54(1), 105-119.   DOI
42 Olson, M.D. (1991), "Efficient modelling of blast loaded stiffened plate and cylindrical shell structures", Comput. Struct., 40(5), 1139-1149.   DOI
43 Houlston, R. and Desrochers, C.G. (1987), "Nonlinear structural response of ship panels subjected to air blast loading", Comput. Struct., 26(1-2), 1-15.   DOI
44 Houlston, R., Slater, J.E., Pegg, N. and Desrochers, C.G. (1985), "On analysis of structural response of ship panels subjected to air blast loading", Comput. Struct., 21(1-2), 273-289.   DOI
45 Kalnins, A. and Dym, C.L. (1976), Vibration: Beams, Plates, and Shells, Stroudsburg, Dowden, Hutchinson & Ross.
46 Needham, C.E. (2012), Blast Waves, Springer-Verlag Berlin and Heidelberg GmbH & Co. KG, Berlin, Germany.