• 소음진동
• /
• 제11권3호
• /
• pp.449-454
• /
• 2001

The shock performance of hard disk drives has been a serious issue for portable computers and AV application HDD. Focusing on the motion of an actuator, we investigated non-operational shock mechanism and studied several parameters that affect the shock performance by experimental analysis. It was found that there are two important factors fort the actuator to endure high shock revel. One is a shock transmissibility and the other is a beating between the arm blade and the suspension. To generalize the shock transmissibility, the concept of shock response spectrum was introduced. The shock response spectrum of the actuator system was obtained experimentally and compared with that of an analytical single degree of freedom model. It was found that there was a good agreement. The first bending natural frequency of the arm blade was found to be the most important factor for the low shock transmissibility. By applying the shock response spectrum and avoiding the beating, we could design an actuator of high shock performance.

• 한국군사과학기술학회지
• /
• 제8권3호
• /
• pp.73-82
• /
• 2005

This paper describes shock waveform synthesis methods for a shock response spectnlm over a short time interval with which intereference between parts within a test item is increased to perform a sufficient shock test for damage or malfunction which may be caused by the interference between parts, and a digital filter for obtaining a shock response history required for the shock waveform synthesis and a digital inverse filter for restoration by inversely using the digital filter. The time at which the maximax value occurs in the response history is detected in order to establish a delay time which is one of the parameters in the wavelet, on the condition that the natural frequency of SDOF system with a Q (quality factor) of 10 equals to the wavelet frequency of the zero delay wavelet input. A shock response spectrum over a short time interval and an abrupt change in the acceleration for an instant are illustrated as features of the synthesized waveform.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.493-498
• /
• 2005

Underwater explosion shock response analysis of a MIL-S-901D Standard Floating Shock Platform(SFSP) was performed using LS-DYNA/USA, and the accuracy of analysis results was examined through the comparison of them with the existing test results. Surrounding fluid as well as the SFSP was included In a three dimensional finite element model for the consideration of the cavitation effects of UNOEX shock wave. It was confirmed that the analysis results could predict accurately the shock behaviors of the SFSP, and the response characteristics according to heavy weight shock tests could be figured out well.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.805-811
• /
• 2016

Prior to installation in a navy ship, shipboard equipment should be qualified by shock test requirements. The multi-function console mounted on the elastic platform of the ship should also withstand given shock loads. In this study, both real shock test methods, as well as numerical computer simulations using the finite element method were used to verify structural durability under shock load conditions. First, we used domestic test facilities to perform possible shock tests, including an impact hammer test, a drop table test and a shaker shock test. Full model tests satisfying the shock response spectrum level were performed. Thereafter, an analytical model of the complex console structure was built by the finite element method. Finally, numerical results were verified by modal test results of the real product and an FEA analysis was also performed with a full model transient response analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.588-593
• /
• 2012

Nowadays, various forms of electro-optical rifle scope have been developed and used in order to enhance the accuracy of small arms. However, firing shock acceleration has characteristics of pyroshock having a big acceleration value with very short duration time, which the electro-optical scopes should be designed to sustain. In this paper, the firing shock acceleration, which is transmitted to the electro-optical scope, was measured and SRS (Shock Response Spectrum) analysis was performed by using the measured firing shock acceleration. Furthermore, a shock test condition using a drop-table shock tester, which can simulate the actual firing shock acceleration, was devised. The devised shock test condition will be utilized to test the electro-optical scope itself before attaching it to the small arms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.267-272
• /
• 2014

In this paper, we analyze the characteristics for the driving shock resistance of the military vehicle through the bump test. Prior to the experiment, theoretical analysis was performed by using the SRS(shock response spectrum) and VRS(vibration response spectrum) analysis method. And we estimated the characteristics for the driving shock resistance of the military vehicle. Bump test was performed using the acceleration sensor and the driving test at a different speed. We evaluated the characteristics for the driving shock resistance of the military vehicle based on the result. And predicted values were compared with the theoretical analysis. In addition, we evaluated the results of the theoretical prediction of the SRS and the VRS analysis. And we evaluate the suitability of the prediction method at military vehicle shock analysis.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.123-131
• /
• 2007

Extracellular stresses induce heat shock response and render cells resistant to lethal stresses. Heat shock response involves induction of heat shock proteins (Hsps). Recently the roles of Hsps in neurodegenerative diseases and cancer are attracting increasing attention and have accelerated the study of heat shock response mechanism. This review focuses on the stress sensing steps, molecules involved in Hsps production, diseases related to Hsp malfunctions, and the potential of proteomics as a tool for understanding the complex signaling pathways relevant to these events.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.1-11
• /
• 2003

For an accurate shock response analysis of a floating structure such as a naval surface ship subjected to an UNDEX(UNDerwater Explosion), the cavitation effects due to reflected wave at free surface and wetted structural surface should be considered. In this study, for the consideration of cavitation effects an effective method using LS-DYNA/USA and its theoretical background were presented. Through the application of the analysis of bulk cavitation phenomena in the free field, it could be confirmed that almost the same results were obtained between LS-DYNA/USA code and the analytical method. for the investigation of cavitation effects from the structural shock response characteristics, three dimensional UNDEX shock response analysis of an idealized ship model was also carried out It could be found that the cavitation Phenomena gave significant effects on the structural shock response characteristics, and especially that the shock loadings calculated at the installed location of shipboard equipment were underestimated in the case of no consideration of the cavitation effects, which might cause the severe mistake in its shock-resistance design.

• 한국추진공학회지
• /
• 제2권2호
• /
• pp.88-98
• /
• 1998

충격반응 스펙트럼 시험을 수행하기 위한 가진기의 파형이 웨이브레트들을 이온하여 시험규격에서 규정한 충격반응 스펙트럼을 만족하도록 합성된다. 웨이브레트의 매개변수는 중간주파수, 진폭, 반파의 개수, 지연시간 그리고 극성이다. 시험규격에서 규정한 충격반응 스펙트럼과 정합이 되도록 각 웨이브레트의 진폭은 반복하여 조절된다. 이렇게 합성된 파형은 가진기를 이용한 충격반응 스펙트럼 시험의 참조 가속도 파형으로 간주된다. 본 연구에서는 충격 지속시간을 길게 하여 첨두치가 작은 파형을 제안한다. 몇 가지 사례를 통하여 이 방법의 유용성이 확인되었다.

• 한국군사과학기술학회지
• /
• 제22권5호
• /
• pp.581-589
• /
• 2019

Guided missiles assembled with the bolted joint are subjected to various shock loading conditions while flying in the air and operating on the ground or platform. Especially, It is important to analyze the effect of the shock load on the structure because it affects the structure for a short duration time while its acceleration magnitude is quite large. In this study, mechanical shock tests on the structure with the bolted joint have been carried out to measure the acceleration changes of the structure against external shock loads by electrical exciter. Variation of dynamic characteristics of a structure with fastening methods and fastening forces has been investigated through Shock Response Spectrum analysis.