• 한국안전학회지
• /
• 제26권5호
• /
• pp.13-16
• /
• 2011

The vibration and shock of the opto-electronic protective device was induced mechanical failure or fail to work correctly. In order to identify the exciting frequency components of vibration and shock, vibration signals are measured and analyzed from the mechanical power press. In addition, the modal test for the opto-electronic protective device was performed to investigate the dynamic characteristics. Some FEM simulations were carried out and then anti vibration mount was made for opto-electronic protective device. Based on the results of simulations, some kind of rubber mounts were tested to demonstrate the reduction of vibration and shock. It was verified by the test that a considerable amount of vibration and shock were reduced.

• 한국소음진동공학회논문집
• /
• 제23권10호
• /
• pp.885-894
• /
• 2013

이 연구에서는 함정탑재 장비의 진동으로부터 기인되는 고체음의 저감을 목표로 새로운 형태의 복합형 마운트를 개발하였다. 수동형 마운트와 비접촉식 전자기식 작동기 또는 관성력형 작동기로 구성된 복합형 마운트가 우수한 성능을 보유한다는 선행연구 결과를 바탕으로 이 연구에서 개발된 복합형 마운트는 기존의 검증된 수동형 고무마운트와 전자기식 작동기를 비접촉식으로 결합한 형태이며, 내충격 성능을 고려하여 설계하였다. 먼저 장비로부터 유발된 진동이 외부로 전달되는 성분의 차단에 대해 복합형 마운트의 효과적인 구성요소 배치형식을 제안하였으며, 여러 설계인자를 고려한 초기 설계안을 제시하고, 마운트 설치 시 문제원인이 될 수 있는 내충격 성능을 고려한 최종 설계를 수행하였다. 설계된 복합형 마운트를 제작하고, 실험을 통해 성능을 검토하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.381-386
• /
• 2004

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.186-191
• /
• 2008

A lot of equipments installed in ships must be isolated for relaxing the shock, vibration and noise using the elastic mounts. Most of the elastic mounts are made of the rubber, however it is not easy to design the effective rubber mount. Because, in general, the rubber has a non-linear constitutive characteristics especially for a large deformation. So, there are many difficulties to estimate the accurate structural response of rubber which is the basis of the shape design of the mounts. In this study, the detailed non-linear viscoelastic large deformation finite element analysis method was dealt with. And to verify validity of the present analysis scheme, the results were compared with experiments.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.1-10
• /
• 2015

The light emitting diodes(LED) package of new structure is proposed to promote the reliability and lifespan by maximize heat dissipation occurred on the chip. We designed and fabricated the LED packages mixing the advantages of chip on board(COB) based on conventional metal printed circuit board(PCB) and the merits of Si sub-mount using base as a substrate. The proposed LED package samples were selected for the superior efficiency of the material through the sealant properties, chip characteristics, and phosphor properties evaluations. Reliability test was conducted the thermal shock test and flux rate according to the usage time at room temperature, high-temperature operation, high-temperature operation, high-temperature storage, low-temperature storage, high-temperature and high-humidity storage. Reliability test result, the average flux rate was maintained at 97.04% for each items. Thus, the Si sub-mount based LED package is expected to be applicable to high power down-light type LED light sources.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.141-147
• /
• 1999

Optical disk technology with a laser beam for data recording and retrieval is one of the most promising route for high density information storage in multimedia era. As the storage density and data transfer rates are increased, mechanical issues, mainly noise and vibration, become critical. Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber components with complex shape and under pre-deformed state. In this paper, non-linear large deformations of a rubber mount for optical disk drive were investigated using the finite element method. A tension test of rubber material was performed, to calculate a strain energy function. According to the pre-deformed state, the variation of rubber mount stiffness were calculated and the reliability of numerical results were checked by compared with the measuring the deflection values. Also, the effects of the pre-deformed rubber mount on the system dynamic characteristics were investigated and the relation between the static stiffness variation of rubber mount and the natural frequence variation of system was discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.440-441
• /
• 2013

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.216-218
• /
• 2005

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.275-281
• /
• 2015

Mounts for shipboard equipment in naval ships play an important role for vibration and shock suppression. New large-capacity resilient mounts, SDR-D30 and SDR-D45, have been developed. This paper involves performance tests for the mount which have maximum load of 30 kN and 45 kN, respectively. The performance tests have been carried out for several mounts based on military standards, such as MIL-M-19863D(SH), MIL-M-21693C(SH), MIL-M-17508F(SH), and MIL-S-901D(NAVY). The test items consist of deflection at upper rate load test, dynamic stiffness, uniformity, static load-deflection(axial, transverse and longitudinal), drift test, fatigue test, and shock test. From these performance tests, it is confirmed that the two mounts have good performances based on military standards.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.342-347
• /
• 2015

The launcher pod for missiles capable of carrying a range of different warheads has been designed to be mounted on the tracked vehicle of the hybrid weapon system (HWS). In the development of this launcher pod, its structure was designed to be resilient to damage caused by shock and vibration, as well as preventing assembly errors due to the spring-back of the main composite cover and interfacing parts. This study investigated the design of the newly developed launcher pod, with its hybrid composite-metal structure, through simulation and experiment. Both simulation and actual experiments showed that the structure of the launcher is resilient to vibration and shock. The launcher pod was also subjected to vibration and shock tests to verify its performance.