• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.474-482
• /
• 2021

An average of two to three typhoons that occur in the Philippines or Taiwan pass through Korea each year owing to the influence of the geographical location and western winds. Because Jinhae Bay is known as Korea's representative typhoon refuge, it is filled with ships during typhoons and later becomes saturated with ships anchored to the surrounding routes. If a strong wind drags an anchored ship, a collision accident may occur because of the short distance between the ships. Therefore, a systematic anchoring safety management of Jinhae Bay is required. In this study, the minimum wind speeds of a dragging anchor based on the water depths of Jinhae Bay anchorages were investigated. When 7-9 shackles were given, the minimum wind speeds were 48-63, 46-61, and 39-54 knots at depths of 20, 35, and 50 m, respectively. As the water depth increased, the length of the cable laid on the sea bed became shorter than 5 m owing to the external force, and the minimum wind speed showed a significant difference of 4-8 knots. In addition, ships with high holding power anchors (AC-14 type) had higher minimum wind speeds than ships with conventional anchors (ASS type). Finally, it was confirmed that at a depth of 50 m, dragging easily occurred even when a high holding power anchor was applied.

• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.63-75
• /
• 2001

Species composition and community structure of the fouling found on the hulls of 28 ships traveling through 6 main shipping routes (SR)in the Far East Sea Basin were analyzed using statistical methods. Samples obtained during 1976-1990 expeditions of the Institute of Marine Biology were used for the analyses. These samples were taken from the ships anchored in the harbor by SCUBA diving and in dry-docks of the Vladivostok ship-repairing yard. Similar composition of the fouling communities occurred on the ships travelling the same SR. In five cases, fouling was dominated by different Cirripedia communities. And, in one case, a community of the mussel Mytilus trossulus was found. In most cases the results of the factor analyses showed extremely low level of the relationships among different animals and algal species in fouling communities. Each ocean-going ship had an original structure of the fouling. Spatially disconnected animal associations of tropical and boreal origin may simultaneously coexist at the same ship. This paper testified to the originality of the zone of anthropogenic substrata as a benthos concentrator in the pelagic regions of the world ocean. The fouling from different zones showed that each zone possesses peculiar features and regularities of the composition and relationships between organisms dwelling here.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.488-496
• /
• 2017

Emissions of pollutants from ship-based sources are controlled by the International Maritime Organization (IMO). Since pollutants emitted from ship may be dispersed to the land, controlling emissions from ships is necessary for efficient air quality management in Incheon, where exposure to ship-based pollution is frequent. It has been noted that the ratios of air pollutant emissions from coastal areas to inland areas are about 14% for NOx and 10% for SOx. The air quality of coastal urban areas is influenced by the number of ships present and the dispersion pattern of the pollutants released depending on the local circulation system. In this study, the dispersion of pollutants from ship-based sources was analyzed using the numerical California Puff Model (CALPUFF) based on a meteorological field established using the Weather Research and Forecasting Model (WRF). Air pollutant dispersion modeling around coastal urban regions such as Incheon should consider point and line sources emitted from both anchored and running ships, respectively. The total average NOx emissions from 82-84 ships were 6.2 g/s and 6.8 g/s, entering and leaving, respectively. The total average SOx emissions from 82-84 ships, entering and leaving, were 3.6 g/s and 5.1 g/s, respectively. The total average emissions for NOx and SOx from anchored ships were 0.77 g/s and 1.93 g/s, respectively. Due to the influence of breezes from over land, the transport of pollutants from Incheon Port to inland areas was suppressed, and the concentration of NOx and SOx inland were temporarily reduced. NOx and SOx were diffused inland by the sea breeze, and the concentration of NOx and SOx gradually increased inland. The concentration of pollutants in the area adjacent to Incheon Port was more influenced by anchored ship in the port than sea breezes. We expect this study to be useful for setting emission standards and devising air quality policies in coastal urban regions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.338-347
• /
• 2023

Jinhae Bay, characterized by frequent runaway ships and strong winds during typhoon attacks, poses a high risk of maritime accidents such as ship collisions and groundings. This study aims to determine a safe separation distance between ships in the Jinhae Bay anchorage, considering the unique environmental characteristics of the Korean sea area. Analysis revealed that an average of 100-200 ships anchor in the typhoon avoidance area in Jinhae Bay during typhoon attacks, with approximately 70% of ships experiencing anchor dragging owing to strong external forces exceeding 25 m/s wind speeds. In this study, we analyzed and presented the separation distances between ships during anchoring operations based on domestic and international design standards, separation distances between ships used as actual typhoon shelters in Jinhae Bay, and appropriate safe distances for ships drifting under strong external forces. The analysis indicated that considering the minimum criteria based on the design standards and emergency response time, a minimum safe distance of approximately 400-900 m was required. In cases where ample space was available, the separation distance was recommended to be set between 700 to 900 m. The findings of this study are anticipated to contribute to the development of guidelines for establishing safe separation distances between ships seeking refuge from typhoons in Jinhae Bay in the future.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.7-18
• /
• 2019

The Chosun Dynasty established and implemented measures to prevent Japanese invasion into the southern coast. To this end, the number of naval vessels and the number of ships were increased, and a shipyard(船所) was constructed to protect the safety of the vessels. The shipyard is a port facility where military vessels are anchored and repaired, as well as public facilities that are needed for military training on public and land, as well as facilities for storing supplies and equipment needed for ships on land and defense at the port entrance. Despite being such an important facility for national defense, Shipyard has not been noticed. Studies have shown that the position of shipyard is divided into the riverside type and the riverbank type, which is due to the topographical features of Korea. The repair cycle of naval vessels, the carrying out of Yeonhun(prevent the water from decaying the part of the ship, a raw tree was burned to smoke) and the place of sea training also affected the construction of the Gul River(掘江). The space structure of shipyard is divided into port entry facilities for monitoring and controlling at the entrance to the harbor, border facilities for folding and repairing military vessels, and land facilities for holding land exercises and administrative work of military vessels and military equipment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.27-36
• /
• 2012

The mobile harbor is a new concept system to solve the problems of a port. These problems are that container ships cannot be anchored at the dock because they have become larger or the waiting times of anchoring the ships are increased due to heavy container traffic. A new system is designed to carry out the loading and unloading of containers between the mobile harbor and the container ship using the mobile harbor crane at sea. The crane plays an important role when transferring the containers. In this research, various types of the mobile harbor crane are proposed and structural optimization for each type of the crane is carried out. The loading conditions consider the rolling and pitching conditions of the unstable sea state and the wind force are considered. The constraints are mainly the regulations made by the Korean Register of Shipping. The structure of the crane is optimized to minimize the mass while various constraints are satisfied.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.27-41
• /
• 2017

In this study, geomorphological and geological research has been carried out to estimate the possibility of ancient port location near Hwaseong Dangseong. Geomorphological characteristics around Eunsupo were analyzed through comparison of past and present topographic maps and field survey. Grain size, age dating, and geochemical analysis on surface sediments and borehole sediments were performed. Through the geomorphological characteristics analysis, it was interpreted that Eunsupo area was submerged in seawater especially at high tide in the past, and that ships could approach to the inside of the area through the tidal channel which were developed in the area. It is also assumed that ships were anchored at a low elevation point in the area. The paleo-environmental change in the area was analyzed based on the classification of sedimentary environment using grain size distribution of surface and borehole sediments and geochemical analysis. It was confirmed that the geomorphological interpretation for the possibility of ancient port location coincided well with the paleo-environmental change interpreted through sediment analysis. This study is a basic study for estimating ancient port location, and it is expected that more accurate paleo-environmental changes will be restored through detailed geomorphological survey and additional borehole analysis in the future research.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.49-60
• /
• 2019

Recently the concentration of fine dust and ultra fine dust becomes so bad, which seriously threatens the health and even the life of people. So, government started to investigate several ways to reduce the amount of fine dust and ultra fine dust. From a few years ago it has been known that ships anchored at port emit a lot of pollution and seriously affect air quality of neighboring cities. To reduce the pollution emitted by ship AMP (Alternative Maritime Power Supply) has been proposed, which uses the electricity instead of bunker C oil or diesel. Many developed countries already installed AMP to improve air quality in port area. Korea is in the stage of planning to install AMP at port. However, there are many complicated problems to be handled before AMP installation. Due to huge initial cost and long period of construction ship owner and habour operating company are reluctant to AMP installation. And there are serious technological difficulties in constructing AMP in existing harbour. Lack of AMP core technology and operational difficulties of AMP are also big challenges to be conquered. In this study SWOT/AHP method is used to find strategic and efficient ways to handle above complicated challenges and then to vitalize the AMP installation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.350-357
• /
• 2015

Many countries have been developing and operating an underwater surveillance system in order to protect their oceanic environment from infiltrating hostile marine forces which intend to lay mines, conduct reconnaissance and destroy friendly ships anchored at the harbor. One of the most efficient methods to detect unidentified submarine approaching harbor is sensing variation of magnetism of target by magnetic sensors. This measurement system has an advantage of high possibility of detection and low probability of false alarm, compared to acoustic sensors, although it has relatively decreased detection range. The contents of this paper mainly cover the analysis of possible effectiveness of magnetic sensors. First of all, environmental characteristics of surveillance area and magnetic information of simulated targets has been analyzed. Subsequently, a signal processing method of separating target from geomagnetic field and methods of estimating target location has been proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.822-831
• /
• 2021

Although programs have been developed to evaluate the risk of dragging anchors, it is practically difficult for VTS(vessel traffic service) operators to calculate and evaluate these risks by obtaining input factors from anchored ships. Therefore, in this study, the gross tonnage (GT) that could be easily obtained from the ship by the VTS operators was set as an independent variable, and linear and nonlinear regression analyses were performed using the input factors as the dependent variables. From comparing the fit of the polynomial model (linear) and power series model (nonlinear), the power series model was evaluated to be more suitable for all input factors in the case of container ships and bulk carriers. However, in the case of tanker ships, the power supply model was suitable for the LBP(length between perpendiculars), width, and draft, and the polynomial model was evaluated to be more suitable for the front wind pressure area, weight of the anchor, equipment number, and height of the hawse pipe from the bottom of the ship. In addition, all other dependent variables, except for the front wind pressure area factor of the tanker ship, showed high degrees of fit with a coefficient of determination (R-squared value) of 0.7 or more. Therefore, among the input factors of the dragging anchor risk assessment program, all factors except the external force, seabed quality, water depth, and amount of anchor chain let out are automatically applied by the regression analysis model formula when only the GT of the ship is provided.