• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.174-180
• /
• 2020

With the removal of underwater obstacles in the Busan New Port, the water depth of the pier has been secured up to 17m, and the port authority is constantly responding to the trend of container vessels becoming larger. Also, in 2020, 24,000TEU class container ships are entering to the port, and it is planned to secure the depth in the port to 23 m later in line with this trend. Mega container ships must check in advance the factors to be considered depending on the situation at the time, and for this, it is judged that information sharing among stakeholders is necessary. In this paper, to understand the effect of the corresponding route because of the mega container ships, a transit safety evaluation was conducted based on statistical data on ship entry and departure and maneuver characteristics of corresponding ships. The result showed that the transit of the mega container ships has increased up to 8.4% comparing to the risk of 4,000TEU class container ships. Additionally, safety measures such as minimum safety depth and tug operation plans were presented by gathering opinions on operational characteristics from the perspective of pilotage for safe transit in the Busan New Port area. Through this, it is considered that it will be possible to contribute to the prevention of accidents when entering and leaving the Busan New Port.

• Journal of Navigation and Port Research
• /
• v.42 no.2
• /
• pp.97-106
• /
• 2018

Despite the development of safety measures and improvements in preventive systems technologies, maritime traffic accidents that involve ships carrying hazardous and noxious substances (HNS) continuously occur owing to increased amount of HNS goods transported and the growing number of HNS fleet. To prevent maritime traffic accidents involving ships carrying HNS, this study proposes an intuitive route risk assessment technique using risk contours that can be visually and quantitatively analyzed. The proposed technique offers continuous information based on quantified values. It determines and structures route risk factors classified as absolute danger, absolute factors, and influential factors within the assessment area. The route risk is assessed in accordance with the proposed algorithmic procedures by means of contour maps overlaid on electronic charts for visualization. To verify the effectiveness of the proposed route risk assessment technique, experimental case studies under various conditions were conducted to compare results obtained by the proposed technique to actual route plans used by five representative companies operating the model ship carrying HNS. This technique is beneficial not only for assessing the route risk of ships carrying HNS, but also for identifying better route options such as recommended routes and enhancing navigation safety. Furthermore, this technique can be used to develop optimized route plans for current maritime conditions in addition to future autonomous navigation application.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.105-110
• /
• 2012

Although reinforcement of work intensity caused by the recent prosperity of shipbuilding businesses and the steady increasing of results which produces orders has difficulties with heavy workload, unique work circumstance in shipbuilding industry where main and subcontractor do the job together is not easy to manage its safety systematically. According to KOSHA(Korea Occupational Safety & Health Agency), there were 2, 587 deaths of 95,806 disaster victims a year on average for late 6 years(2003-2008), therein 36,605 disaster victims and 646 death in manufacture where shipbuilding have 2,287 victims, 6.25% of total disaster victims and 45 deaths, 6.97%. Moreover it shows much higher accident rate in shipbuilding industry in Korea than well developed countries in this industry as Japan, Singapore, Taiwan and so it does about 3 to 10 times higher in case of death. Compared to Japan with a shipbuilding competition of orders received system, 2 times and 2.3 times higher for each and it is more than 2 times higher than accident rate of all domestic industries. These increasing of disaster result in a labor-management dispute and it is necessary that more positive efforts and investments because there occurs blind spot, neglected industry safety and health management by lack of them, Therefore this study, for the effective safety and health management of shipbuilding industry, attempts to analyze risk on kinds of ships and budget needed in safety management through classifying ships that are being made recently by three dominate major companies. For this, we carried out a survey and interview targeting experts related to shipbuilding industry and used AHP(Analytic Hierarchy Process) for result analysis. It is considered that cost of safety and health management will be spent more effectively on the results about risk on kinds of ships and budget needed in safety management in the study and that this study can contribute to decreasing disasters in shipbuilding industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.4
• /
• pp.141-152
• /
• 1984

Nowadaty, To keep pace with the mass transportation carried out by vessels in the international trade, the Korean government is trying to make a rapid progress to be a higher ranked shipping country to the world through the shipping increase. For the effective management of international trade by vessels and the safe operation of vessels, it is indispensable for ships radio communication to be effective and smooth. Therefore, to enhance the efficiency of ships radio communication is one of the primary factors to be solved for the econimics of shipping management. The reserch area is not only limited to the ships radio communication on the North Pacific Ocean but limited to the ships radio communication which is one of the chiefest methods of communications. From the research for the efficient methods of ships radio communication, the following results are obtained. (1) The operator on ships radio communication should have the knowledge of specific know-how and wide experience in the operation of ships radio communications. (2) The operator should abopt the radio propagation prediction made by the Ministry of Communications to use the best ionosphere reflection in the short wave communications. (3) The increase the radio officer of 1 to 2 in order to contrive the safety at sea and to keep the ships radio communication fare low. (4) The owner should pay their attentions to the education and employment of radio officer. (5) The authorities concerned on the ships radio communication should estabilish the effective and consistent policy for the ships radio officers.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.242-249
• /
• 2017

In order to develop an HNS safety management system to assess and visualize hazard levels via an automated method, we have conceptualized and configured a sample system. It is designed to quantify the risk of a vessel carrying HNS with a matrix method along navigational route and indicate hazards distribution with a contour map. The basic system which provides a visualized degree of hazards in real time has been introduced for the safe navigation of HNS ships. This is useful not only for decision making and circumstantial judgment but may also be utilized for HNS safety management with a risk base. Moreover, this system could be extended to address the navigational safety of marine traffic as well as of autonomous vessels in the near future if the sensors used are connected with IoT technology.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.69-73
• /
• 2007

The recent huge maritime casualties and their environmental impacts showed that human error in ship navigation is one of the primary causes leading to accidents. In order to reduce maritime accidents and human errors in ship navigation, it is very important and urgent to improve the skills of navigators and develop advanced navigation support system for ship operations. For example, a SCMS(Ship Control and Management System), INS(Integrated Navigation System) and PCS(propulsion Control System) which are considered as a ship automation system was operated in ship. Furthermore, the most recent automation ships collision incidents warn us that only making automation ships alone is not sufficient for improving ship safety. Effective interaction between officer and ship automation system is essential for safety. In this paper, the interactive relationship between officer and the ship automation system was studied, then the research result for reducing maritime casualties will be presented.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.19-22
• /
• 2005

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.420-428
• /
• 2019

Although marine structures are a risk factor interfering with the passage of ships, there are no obvious guidelines on the required safety distance between ships and marine structures under regulations and laws. In this study, the width of the shipping route width was set based on the AIS data to analyze the separation distance between marine structures and ships, and the ships were classified by the length of each ship. By analyzing the distribution at marine structures, this study confirmed that the ships' traffic volume was in the form of normal distribution. To statistically analyze the separation distance between the traffic distribution results and the normal distribution of ships in this study, the traffic pattern analysis around the marine structures was performed. As a result, the traffic pattern was different by length and the recommended safety distance for each length is presented accordingly. Referring to the IMO (International Maritime Organization) the standard turning circle and reference of safety separation distance between ships and offshore wind turbines of the CESMA (Confederation of European Shipmasters' Associations) and P IANC (World Association for Waterborne Transport Infrastructures), the analysis was conducted on ships that did not follow the set distance among the AIS data by setting the distance within the recommended ship safety distance to 5-7 overall length. As a result, the 5.5 length over all of the safety recommendations were selected as appropriate, and based on the above results, the two cases recommending ship safety distance were proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.161-167
• /
• 2002

This paper describes the types and features of amphibious ships which have been constructed and commissioned. The characteristics of hull form design also are studied. Design constraints due to general arrangement and the satisfaction of requirements are investigated. We represent the design concept of hull form based on the design data of the worldwide amphibious ships and our experiences.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.81-87
• /
• 2002

High speed naval ships are configured with open shafts The shafts, bearings, and propellers are supported by shaft struts. Proper design of struts involves issues of structural, vibration, and hydrodynamic analysis and design. Strut arm cavitation in high speed occurs because of a misalignment of the strut arm with the local incident flow. Proper selection of the strut section can minimize the generation of cavitation. This paper describes issues in the design struts and notices based on the design of Patrol Craft and Amphibious Ship.