• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.236-242
• /
• 2018

Damage due to ice collision is the most serious threat for the structural safety of ships operating in arctic region. Since such hull damages are usually caused by the collision of floating ice at excessive voyage speed of ships, the authorities responsible for the shipping at arctic sea are required to provide the speed limit for safe voyage, so-called safe speed. In countries near arctic ocean, such as Canada and Russia, empirical methods to determine the safe speed of ships based on their long experience of arctic voyage have been established and applied them in the real arctic navigation. However, in Korea, it is not easy to accumulate the arctic voyage experience and related technical database, so it seems to be a realistic approach to adopt a safe voyage speed estimating method in arctic sea based on the ice collision simulation technology using the nonlinear finite element analysis. The aim of this study is to develop a technique for estimating the safe voyage speed of vessels operating at arctic sea through the ice collision analysis, In order to achieve this goal, the standard procedure of the ice collision analysis is dealt with and example analysis was carried out and the results were considered. To investigate the validity of developed method, POLARIS system proposed by IMO was studied for comparison.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.1-7
• /
• 2009

Navigation speed control is an important factor to improve the traffic safety, it is only researched about maximum speed control until now. Recently, there are lots of the low speed vessels including towing boats, carry heavy shipbuilding blocks in the Korean waters, so the danger degree of navigating vessels was increasing more and more. This paper analysed the effectiveness of minimum speed control with the operation burden's decrease, and it proposed the proper the minimum navigation speed of each traffic volume. Main results of this research are as follows. (1) in the case of 5 ships/hour, minimum speed control is effective if the lowest speed is fixed more than 5kts. (2) in the case of more than 10 ships/hour, speed control is some effective if the lowest speed is established 7kts. (3) But, when there are many ships in the waters, minimum speed control is not effective because distances between ships become near and ships navigate for a long time by a lot of ship having a few difference of relative speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.122-127
• /
• 2022

Currently, the drone is considered as a mobile base station of USN as a method to act as a base station using USN in existing LTE-M and LTE networks for data transmission in unmanned ships. Therefore, the drone, which is a mobile base station, is a sink node equipped with an LTE modem or a short-range communication modem, and can collect safety information of ship operation from the sensor node and transmit the safety information to the ship or transmit the information between the ships. As, if a short-range network is formed by using drones, it will form a communication network around unmanned ships and will be advantageous for collecting information using security and environmental sensors. In this paper, we propose a method to transmit environmental sensor data and to utilize communication between ships using drones to secure the surrounding information necessary for AI operation of unmanned ships in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.992-1001
• /
• 2022

The maritime traffic analysis has been conducted in various ways to solve problems arising from the complex marine environment. However, recent trends in the maritime industry, such as the development of the maritime autonomous surface ships (MASS), suggest that maritime traf ic analysis needs change. Accordingly, based on the studies conducted over the past decade for improvements, automatic identification system (AIS) data is mainly used for maritime traffic analysis. Moreover, the use of geographic information that directly af ects ship operation is relatively insufficient. Therefore, this study presented a method of using a combination of shape format data and AIS data to enhance maritime traffic analysis in preparation for the commercialization of autonomous ships. Consequently, extractable marine traffic characteristics were presented when shape format data were used for marine traffic analysis. This is expected to be used for marine traffic analysis for the introduction of autonomous ships in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1067-1073
• /
• 2021

Regulations to reduce greenhouse gas emissions from ships are gradually being strengthened. EEXI (Energy Efficiency Existing Index) has been introduced in existing ships, and various studies are aimed at achieving the greenhouse gas emission reduction target are currently underway. In this study, we proposed a method to reduce greenhouse gas emissions through reducing fuel oil consumption by applying a solar power generation system to a pure and truck carrier among existing ships engaged in international voyages. The proposed photovoltaic power generation system consists of a photovoltaic module, an energy storage system, and a power conversion device. To confirm applicability, the system was modeled through a power electronics program, and a simulation was performed. In addition, economic analysis was conducted to check the feasibility of application to real ships, and it was confirmed that significant results were derived in the economical aspect after about 11 years had elapsed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.469-492
• /
• 2000

"International Safety Management(ISM) Code" means the International Management Code for the Safe Operation of Ships and for Pollution Prevention as adopted by the Assembly, as may be amended by the International Maritime Organization. This Code have brought into force internationally since 1th July, 1998 by incorporated to the new Chapter Ⅸ in the SOLAS Convention. Accordingly those States which give effect to the SOLAS Convention will have to ensure that rules giving effect to the Code are introduced into their domestic legislation. The purpose of this Code is to provide an international standard for the safe management and operation of ships and for pollution prevention, by this to reduce the maritime casualty which could caused by neglect of person. To achieve this purpose the ISM Code specifies a number of broad 'safety management objectives' for owning or operation companies, and it requires that such companies should establish, implementing and maintain a written Safety Management System(SMS) covering a whole range of safety environmental and related matters. These requirements of the Code could effect on the carrier in some points such as duty of due diligence to care for cargo, due diligence to make the vessel seaworthy and burden of proof etc. In this respect, We should know that the ISM Code could effect on the carrier advantageously or disadvantageously subject to whether the carrier observed the requirement of the ISM Code. Although it does not add cause of liability or increase limitation of liability imposed to the carrier.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.47-57
• /
• 2008

Many accidents occur on the oceans. Accidents involving ships can cause enormous damage. When an accident occurs, the cost of environmental restoration can bankrupt even a top-ranked international company. The potential damages resulting from ship accidents have resulted in many international agreements such as MARPOL, SOLAS, ISM Code, etc. The viability of damaged ships has become more and more important. A damaged ship's viability and cargo safety can be improved by a safety assessment design procedure. We consider th￡ shipbuilding industry's distributed characteristics to define a safety assessment system with software engineering-based requirements analysis. We used a distributed network-based simulation method (HLA - High level architecture), because of ease of reuse and expansion of existing components to other situations, and because it is a military standard. HLA is the standard for distributed network-based simulation in many countries including the United States, Canada, Israel, and Korea. The paper describes research to develop a prototype of a network-based safety assessment simulation system by software engineering based analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.359-365
• /
• 2013

There are more than 10 ships and jetfoil passenger ships with speeds of 30~40 kts navigating between Japan and Busan ports per hour. Busan port has the highest density of traffic among the Korean ports and waterways. Jetfoil ships are the most frequently encountered amongst other vessels and about 18 % of passing jetfoil vessels violated port regulations. Based on the analysis of traffic survey carried out for 10 days, jetfoil vessels often overtook other vessels in route and deviated with high speed. This paper verified a proper speed and how to navigate in or out route of jetfoil ships by marine traffic flow simulation. A acceptable navigation speed for jetfoil vessel's mariner was calculated at less than about 32kts in Busan Port. It is a little different that shiphandling difficulty of jetfoil was almost the same whether passing in and out route in Busan Port. This paper proposes that the passing time of jetfoil ships should avoid the peak time to improve the traffic safety in Busan Port.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1086-1091
• /
• 2022

The International Maritime Organization is establishing international agreements on maritime safety and security to prepare for the introduction of autonomous ships. In Korea, the industry is focusing on autonomous navigation system technology development, and to reduce accidents involving coastal ships, research on autonomous ship technology application plans for coastal ships is in progress. Interest in autonomously operated ships is increasing worldwide, and maritime demonstrations for verification of developed technologies are being pursued. In this study, a basic investigation was conducted on the design of a demonstration ship and an onshore platform (remote support center) using digital twin technology for application to coastal ships. To apply digital twin technology, an 8-m small battery-powered electric propulsion ship was selected as the target. The basic design of the twin-integrated platform was developed. The ship navigation and operation data were stored on a server system, and remote-control commands of the electric propulsion ship was achieved through communication between the ship and the onshore platform. Ship performance management, operation and operation optimization, and predictive control are possible using this digital twin technology. This safe and economical digital twin technology is applicable to ships responding to crisis scenarios.

• Journal of the Korean earth science society
• /
• v.45 no.3
• /
• pp.214-223
• /
• 2024

The recent increase in maritime traffic and coastal leisure activities has led to a rise in various marine accidents. These incidents not only result in damage to human life and property but also pose a significant risk of marine pollution involving oil and hazardous and noxious substances (HNS) spills. Therefore, effective ship monitoring is crucial for preparing and for responding to marine accidents. This study conducted an aerial experiment utilizing hyperspectral remote sensing to develop a maritime ship monitoring system. Hyperspectral aerial measurements were carried out around Gungpyeong Port in the western coastal region of the Korean Peninsula, and spectral libraries were constructed for various ship decks. The spectral correlation similarity (SCS) technique was employed for ship detection, analyzing the spatial similarity distribution between hyperspectral images and ship spectra. As a result, 15 ships were detected in the hyperspectral images. The color of each ship's deck was classified based on the highest spectral similarity. The detected ships were verified by matching them with high-resolution digital mapping camera (DMC) images. This foundational study on the application of aerial hyperspectral sensors for maritime ship detection demonstrates their potential role in future remote sensing-based ship monitoring systems.