• 수산해양교육연구
• /
• 제17권1호
• /
• pp.58-66
• /
• 2005

Floating debris was observed using a training ship, KAYA, of Pukyong National University with cruising speed of about 10-12 knot during July 12~25, 2003. The area sampled was the East Sea enclosed by 3 nations, namely, Korea, Japan and Russia, and was divided into 68 unit segments on survey routes [Fig. 1]. Debris fabrication materials were categorized with 6 items, e.g., man-made or natural wood items, paper and cardboard, nylon rope, styrofoam, vinyl and plastic, floating metal and glass containers. All identified items within $100{\pm}10 m$ wide band were recorded but ignored if beyond this boundary. The results of this study are as follows: 1. The average numbers of debris per unit area, $1km^2$, were found as 16.3 pieces (items) in the sea. 2. The highest densities of numbers, $32.3pieces/km^2$, were discovered in vicinity of the Oki strait of Japan, area of 'NEK' in Fig. 1. 3. Especially, styrofoam item only was composed to 63.6% of all in the sea of 'SD', located in the southern part of Dokdo Island, Korea. The item seems to be derive from the Southern Sea of Korea. 4. Therefore, comparing the distribution of debris numbers (the results of above 2 and 3) with flow patterns of Kuroshio currents, it was shown that their relation was good agree each other. Further more surveys are being conducted and a much wider coverage can be achieved with other countries, then it can be obtained that the East Sea is polluted to some extent, where is the origin of debris, and the finding of floating routes and stationary sea.

• 수산해양기술연구
• /
• 제34권3호
• /
• pp.287-293
• /
• 1998

Floating debris was recorded from a training ship, #1 Kwarnksan, of Pukyong National University with about 10 knots speed during March, May and July of 1997. The area sampled is the Southeastern Coast of Korea, divided into 40 unit segments on survey routes. Debris fabrication materials were categorized using the following ; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100\;{\pm}\;2\;m$ wide band were recorded but ignored if beyond this boundary.The results of distribution and composition of floating debris in the area as follows:1. The quantities of debris during the duration of survey were distributed from 2~605 items per km2. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the coastal waters of Seoimal lighthouse, the southeastern part of Koje island, next near Nakdong estuaries. Especially styrofoam & plastics were observed in 77.4~87.2% of sampled area, next is wood items, 9.1~ 13.5%. And nylon netting & rope, 3.6%, was the third item of pollutant. Others are very small. 3. Compared with the East Coat of Korea, the quantities of all debus in theSoutheastern Sea are 6 times as large as the East Coast. The survey provides a basis for more detailed survey work in the South Sea. Further surveys are being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the removal method, finding of sources, stationary area of debris.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.91-96
• /
• 2017

본 논문은 저궤도 위성 통신을 위한 미앤더 슬리브 모노폴 안테나를 제안하였다. 안테나는 평면 모노폴과 미앤더 슬리브의 그라운드와 함께 광대역 특성을 갖는다. 안테나의 모노폴 및 그라운드 도체는 동일 평면상에 있으며 동축 케이블을 이용한 공급을 통해 급전하였다. 안테나의 파라미터 변수의 특성을 확인하기 위해 상용 소프트웨어인 HFSS를 사용하였으며, 안테나 제조를 위해 유전상수가 4.4인 FR4를 사용하였다. 안테나의 크기는 $600mm{\times}20mm{\times}1.6mm$이다. 제작된 안테나의 주파수 대역은 130MHz~151MHz이고, 대역폭은 20MHz이다. 안테나의 측정결과, 반사손실은 -10dB 이상의 대역에서의 반사 손실을 얻을 수 있었다. 방사 패턴의 최대 이득은 2.64dBi이다.

• 대한공업교육학회지
• /
• 제33권2호
• /
• pp.154-169
• /
• 2008

이 연구의 목적은 초 중등학교 학생들에게 수송 기술에 대한 흥미 및 지식, 기능, 태도를 기르고 나아가 역사 인식을 제고할 수 있는 교수-학습 자료인 학습용 모형 거북선을 개발하는 것이다. 먼저 문헌 연구를 수행하고, 모형 거북선의 구조와 구동방법 살핀 후, 모형거북선을 만들었다. 이 연구를 통하여 얻은 주요 결과를 요약하면 다음과 같다. 첫째, 학생들이 직접 제작하고 실험함으로써 설계 능력, 제작 능력, 탐구 능력 및 기술적 소양을 함양할 수 있도록 모형 거북선을 개발하였다. 둘째, 구동에너지에 따라 자연에너지를 이용한 돛, 태양에너지를 이용한 태양전지, 기계적인 에너지를 이용한 링크장치 및 스크루를 활용한 학습용 모형 거북선을 개발하였다. 셋째, 수송 영역에서 선박에 대한 관심과 흥미를 유발할 수 있도록 물 위에서 무선 조작으로 작동하는 모형 거북선을 개발하였다. 넷째, 역사적으로 의미 있는 전통 문화 유산인 거북선을 초 중등학교 기술 교과에서 실험 실습 교수-학습 자료로 활용할 수 있도록 개발하였다.

• 수산해양교육연구
• /
• 제9권1호
• /
• pp.31-39
• /
• 1997

Floating debris was recorded from a training ship, #1 Kwanaksan, of Pukyong National University with about 10 knots speed during August 19~26, 1996. The area sampled is the East Coast of Korea, divided into 33 unit segments on survey routes. Debris fabrication materials were categorized using the following; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100{\pm}2m$ wide band were recorded but ignored if beyond this boundary. The results of distribution and composition of floating debris in the area are as follows: 1. The quantities of debris during the summer were distributed from 1.8~52 items per $km^2$. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the vicinity of Pusan and ills an area. Especially styrofoam & plastics were observed in 81% of sampled area, next is wood items, 9.1%. Nylon netting & rope was the least widespread pollutant. 3. The relationship between distribution of debris and surface currents of the area was not apparently revealed through this survey. Further surveys are being instigated, and from this it is hoped that a much wider coverage can be achived, perhaps on all sites of Southern and Western sea of Korea and contributed to the finding of sources,stationary area of debris.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.136-143
• /
• 2018

3-D templates are produced to evaluate completeness of the shell plates during the forming process, which is an essential step for the ship production. They are mostly produced in advance during the detail/production design stage, but occasionally they are requested by the shell plate forming department, because it is impossible to predict accurately the necessities of them at the design stage. This results in a huge loss of man-hour and a bottleneck. In order to resolve this issue while reducing the dependence on other department, the process of manufacturing the 3-D templates needs to be automated. Therefore, this study proposes an automatic system that calculates the manufacturing information of the 3-D templates with only geometric information of the shell plates. The system considers the thickness and the cutting method of the parts of the 3-D templates and some options are provided to reflect the intention of the worker.

• 한국항행학회논문지
• /
• 제25권6호
• /
• pp.523-529
• /
• 2021

본 논문은 해양 IoT 서비스, 특히 어구 자동식별 시스템을 위한 해상 부이에 내장되는 안테나의 설계와 제작에 대해 살펴보았다. 제안하는 안테나의 주파수 대역은 해양 IoT 서비스의 확장성을 고려하여 433 MHz와 920 MHz 이중 대역으로 하였다. 안테나는 920 MHz 주파수 대역을 위한 이중 패턴 모노폴 구조와 433 MHz 대역을 위한 미앤더 구조로 설계되었다. 제작된 이중 대역 안테나의 전압 정재파비는 433 MHz에서 1.548로, 920 MHz 대역에서 평균 1.5로 측정되었다. 안테나 이득은 920 MHz 주파수 대역 중 902 MHz에서 최대값인 3.83 dBi가 얻어진 반면 433 MHz에서는 1.18 dBi로 얻어졌다. 433 MHz에서의 안테나 이득이 920 MHz 대역에서의 안테나 이득보다는 작지만 목표치인 -5 dBi를 초과하는 값이다. 또한 본 연구를 통해 얻은 다른 모든 측정값들은 어구 자동식별 시스템을 위한 해상 부이와 어선 사이의 통신 거리 목표치인 10 km를 달성할 수 있는 성능 기준에 해당한다는 것을 확인하였다.

• 수산해양교육연구
• /
• 제11권2호
• /
• pp.203-215
• /
• 1999

Floating debris was recorded from a training ship, Kaya, of Pukyong National University with about 12 knots speed at July 19~21, 1999 and July 24~26. The sampled area is the Yellow Sea (YS) connected from Cheju Is. of Korea to Qindao harbor of China, divided into 88 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoams, vinyl and plastics, floating metal and glass containers. All identified items within a $120{\pm}20m$ wide band were recorded but ignored if beyond this boundary. The results of distribution of floating debris in the area are as follows: 1. The greatest quantities of marine debris discovered during the survey were $184pieces\;per\;km^2$ near Qindao harbor. The next polluted areas, Sohuksan islands, positioned in the eastern part of YS were scattered in about $40pieces/km^2$ or so. 2. Among items, woods, paper and cardboard, vinyl and plastics were found out near Qindao Coast of China. On the other hand, there were many styrofoams, nylon netting and rope near the area of Sohuksan islands in the eastern part of YS. 3. The distribution densities of western part of YS near Qindao are varied with largely range in items and quantities but those of the eastern part, near Sohuksan islands were nearly constant. 4. Styrofoams were composed of 63% among all debris in YS, next paper and cardboard 15%, and wood item, vinyl and plastics each 10%. Therefore, marine debris of YS is revealed that distribution characteristics and composition are very different in each area. These phenomena are concluded that they largely depend on the life styles in land and the utilities of the sea. And of items, styrofoams is dominated by the distribution pattern of YS. Furthermore, surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps all sites of the YS and contributed to the finding sources, the stationary area and removal method of debris joined the flow patterns.