• 한국지능시스템학회논문지
• /
• 제12권2호
• /
• pp.157-163
• /
• 2002

본 연구의 목적은 배치 특성의 정량화에 의해 배치 대안들을 비교할 수 있는 객관적인 평가 기준을 정림하는 것이다. 장비배치는 모든 구성 요소들의 기능을 최대로 하고 동시에 공간적인 제한 조건을 만족시키도록 여러 가지 장비들의 위치를 결정하는 설계단계이다. 선박의 경우 설계자가 제시하는 몇 가지 배치안 중 한 가지만 선택하게 되는데 이 과정은 숙련된 전문가의 경험, 지식, 판단에 대한 의존도가 매우 높고 또한, 객관적인 평가가 어렵다. 우리는 이러한 서술적인 언어로 된 것을 퍼지 이론을 통해 정량화하여 배치안을 객관적으로 평가할 수 있는 기준을 제시한다.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.169-181
• /
• 2014

Recently ships and ocean platforms are becoming increasingly technological, unmanned, and huge. Maintenance and safety monitoring of these products is very important for safety reasons. Therefore, real-time monitoring of safety regions, such as the engine room, and hull structure, and environmental states, like fire and pressure of LNG tanks, is required for the sustainable ships. In this paper, a ZigBee-based wireless sensor network is suggested to monitor ships and ocean platforms effectively. However, this causes some telecommunication problems because these products are made of steel. To resolve this problem, we use the mesh networking of Zig-Bee that can monitor the regions and environmental states consistently. The telecommunication of such a monitoring system is tested on a real container ship and its performance is verified. The real-time monitoring results are displayed on the users' smart devices.

• 한국화재소방학회논문지
• /
• 제20권3호
• /
• pp.96-100
• /
• 2006

소형선박의 기관실을 상사한 모형실에서 분말소화설비의 개발을 위한 화재시험을 수행하였다. 화재시험이 수행된 모형실은 $2.9m^3,\;4.5m^3,\;8m^3$ 3종류였으며 각 모형실에는 개구부와 송풍용 팬이 설치되었다. 경유를 소화모형의 연료로 사용하였다. 또한 소화약제 방출용 노즐은 천장에서는 하향으로 벽 또는 벽의 모서리에서는 수평으로 분사되도록 설치하였다. 개발제품은 모든 소화모형을 분말소화약제 방출 중에 소화하였으며 소화 후 재발화가 없었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1041-1063
• /
• 2014

Some results on the hydroelasticity of ultra large container ships related to the beam structural model and restoring stiffness achieved within EU FP7 Project TULCS are summarized. An advanced thin-walled girder theory based on the modified Timoshenko beam theory for flexural vibrations with analogical extension to the torsional problem, is used for formulation of the beam finite element for analysis of coupled horizontal and torsional ship hull vibrations. Special attention is paid to the contribution of transverse bulkheads to the open hull stiffness, as well as to the reduced stiffness of the relatively short engine room structure. In addition two definitions of the restoring stiffness are considered: consistent one, which includes hydrostatic and gravity properties, and unified one with geometric stiffness as structural contribution via calm water stress field. Both formulations are worked out by employing the finite element concept. Complete hydroelastic response of a ULCS is performed by coupling 1D structural model and 3D hydrodynamic model as well as for 3D structural and 3D hydrodynamic model. Also, fatigue of structural elements exposed to high stress concentration is considered.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.216-221
• /
• 2005

Many tanks such as a fresh water tank, an aft peak tank and oil tanks are arranged in the engine room and aft part areas of the ship. By added mass effect of the fluid inside the tanks, the natural frequency will be changed according to filling height of the tank. For this reason, there is possibility of occurrence of excessive vibration by resonance between natural frequencies of local structure and excitation frequencies of the propeller or main engine. Therefore, calculation of natural frequencies is required for structure for many types of tank which are contacting with water or oil to consider added mass effect for anti-resonance design at design stage. In this study, a case of structure damage on the fresh water tank for 2600 TEU container vessel is introduced. In addition, natural frequency analysis and vibration measurement have been performed to investigate vibration characteristics for excessive vibration control.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• 한국통신학회논문지
• /
• 제39C권8호
• /
• pp.660-666
• /
• 2014

본 논문에서는 선박 내부에 IP-USN(Internet Protocol-Ubiquitous Sensor Network)망을 적용한 경우 선박 내부를 기능적으로 분류하여 센서 노드를 구성하고 효율적으로 라우팅할 수 있는 방안을 제안하였다. 이동성이 제한적인 선박의 기계실이나 기관실과 같은 경우에는 트리형태의 라우팅 기법을 적용하였으며 이동성이 많은 식당이나 휴게실과 같은 거주구역에는 메시 형태의 라우팅 기법을 적용하였다. 또한 싱크 노드와 센서 노드 사이의 경로를 주기적으로 유지하기 위해서 새로운 메시지 타입인 RDES(Routing Detect Sensor-Node) 형식의 메시지를 정의하였다. RDES 메시지를 이용함으로써 이동성에 상관없이 추가되는 센서 노드에 대한 경로 업데이트가 가능하다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.93-94
• /
• 2006

The repair welding of small leakage parts on the water pipeline in engine room is often and important factor in standby and emergency condition in a ship. So, the purpose of this study is to evaluate the corrosion characteristics of welding part of leakage water pipe in case of some underwater welding electrodes. The corrosion current density between welding metal and base metal was considerably different according to used underwater welding electrodes. In case of DC welding, its corrosion characteristics was better than that of AC welding.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.85-89
• /
• 2013

In the engine room and the aft body, there are so many fluid tanks such as fresh water tank and oil tank. The vibration analysis for the fluid tank structures has to consider the added mass effect due to the fluid. However, it is known that the result of the fluid tank has the difference according to the boundary condition of the fluid field such as infinite fluid and finite fluid. In this paper, a numerical case study is carried out for the research about the vibration characteristics of the fluid tank with various fluid field. In addition, an experimental study is carried out to verify the validity of the vibration analysis for the fluid tank structure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.1-12
• /
• 1994

Most merchant ships are supplied with the only essential fresh water from a port for economical cargo transportation and the reduction of a nevigation expense. And the deficient fresh water for a voyage is produced by fresh water generator with the various exhaust energy generated in the engine room on a voyage. At present, an evaporation type fresh water generator are extensively used on ship because the operating cost of it is lower than that of a reverse osmosis pressure type. This study introduce a development results on the large evaporation type fresh water generator enable to be used for large merchant ships. It is accomplished the performance test using the developed large fresh water generator.