• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.336-343
• /
• 2009

Because ships are very isolated and independent objects when sailing on the ocean, if a fire and smoke occurs, nobody can be sure to escape safely from ship at the moment. On the focus of the relationship between the sight transmissivity by fire smoke density and the life safety, this study performs simulations and experiments, respectively. To evaluate the theoretical evacuation time, CFAST software which is known as a 2 zone model analysis tool is used, and the result is 54 seconds from ECR(Engine Control Room) exit to upper deck exit and 34 seconds from bosun store to upper deck exit. And totally 12 types of experiments are performed with other 10 persons per experiment. As the result, it is cleared that the low sight transmissivity leads to the low life safety and the obstruction which can be happen unexpectedly on the evacuation way on fire makes it worse. At the condition of the smoke density 0%, over 90% people arrive at upper deck exit safely. But with the transmissivity of 8%, 70%(from ECR) and 30%(from bosun store) among experiment persons of each can survive, and with same density and unexpected obstruction, the survival ratio goes down to only 20% and 10%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.313-321
• /
• 2009

The construction of fiber-reinforced plastic (FRP) boats is decreasing trend since the application of international regulations on the control of marine environmental pollution, which recommended the use of environmentally friendly materials. The aluminum alloy used with material for ship is a superior to FRP. It is environmental friendly, easy to recycle, and provides a high added value to fishing boats. However, the welding for Al alloy materials have many problems, such as deformation by welding heat and effect of the working environment. In this paper, it was carried out welding by robot with welding material of ER5183 and ER5556 on 6061-T6 Al alloy for ship. The mechanical and electrochemical characteristics evaluated for specimen welded by robot. The cathodic polarization trend for the base metal and welding metal showed the effects of concentration polarization due to oxygen reduction and activation polarization due to hydrogen generation. The hardnesses of welding zone and heat affected zone are lower than that of base metal. At the result of tensile test, the specimen welded with ER5183 presented excellent property compared with ER5556.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.127-136
• /
• 2000

Welding deformations reduce the accuracy of ship hull blocks and decrease the productivity due to correction work. Preparing an error-minimizing guide at the design stage will lead to a high quality as well as high productivity. And a precise method to predict the weld deformation is an essential part of it. This paper proposes an efficient method to predict complicated weld deformations based on the inherent strain theory combined with the finite element method. The inherent strain is determined by the highest temperature and the degree of restraint. In order to calculate the inherent strain exactly, it is considered that the degree of restraint becomes different according to the fabrication stages in real structures. A simulation of a stiffened plate shows the applicability of this method to simple ship hull blocks.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.109-117
• /
• 2000

In order to develope ship hull forms. many various models are represented numerically in terms of B-spline surfaces and tested experimentally in the towing tank. It is very difficult to make various ship hulls with free forms in handiwork. As the first step of development of a free form cutting machine which becomes a good substitute for high-priced model cutting machines, free forms representation for model cutting are developed. In this paper, NURBUS surfaces are represented on the assumption that data points may be control points contrary to existing methods.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.69-77
• /
• 2000

This study was a part of FSA study which was initiated by IMO and was applied to hatchway watertight integrity of bulk carriers. Hazards which were involved in high risk level were identified as follows. Ship Operation out of Design Criteria(Hatch Coaming Damage) and Poor Maintenance & Inspection(Securing Arrangement Damage). The potential risk was calculated by risk analysis and risk control option was made to reduce potential risk. The potential risk was about U$60,000/ship-year and could be reduced to about U$30,000/ship-year by applying RCO 1(Advanced system directly related to Hatchway Security). In addition, effectiveness of RCOs was shown by cost benefit assessment.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.3
• /
• pp.13-22
• /
• 2013

Queueing system with scheduled arrivals is useful in many fields where both customers' waiting time and servers' operation time (utilization) are important, and arrival time of customers is possible to be controlled. In this paper, we analyzed the operation of ship maintenance with the queueing system with scheduled arrival. Based on the model presented by Pegden and Rosenshine [8], who dealt with exponential service time, we extended the service time distributions to phase-type distribution which is able to include a wide range of real stochastic phenomena. Since most activities in the military are carried out under tight control and schedule, scheduled arrival queue has quite good applicability in this area. In this context, we applied queue with scheduled arrival to the optimal booking time decision for the ship maintenance in the navy.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.198-208
• /
• 2016

The painting process of large ships is an intense manual operation that typically comprises 9-12% of the total shipbuilding cost. Accordingly, shipbuilders need to estimate the required amount of anti-corrosive coatings and painting resources for inventory and cost control. This study aims to develop a software system which enables the shipbuilders to estimate paint area using existing 3D CAD ship structural models. The geometric information of the ships structure are extracted from the existing shipbuilding CAD/CAM system and used to create painting zones. After specifying the painting zones, users can generate the paint faces by clipping structural parts inside each zone. Finally, the paint resources may be obtained from the product of the paint areas and required paint thickness. Implementing the developed software system to real shipbuilders' operations has contributed to improved productivity, faster resource estimation, better accuracy, and fewer coating defects over their conventional manual calculation methods for painting resource estimation.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.2
• /
• pp.29-56
• /
• 1993

The International Convention for the Prevention of Pollution from Ship, 1973, as modified by the Proto-col of 1978 relating thereto, well known as MARPOL 73/78, is probably the most important international agreement on the subject of marine pollution. The main purpose of the Convention is to reduce the total oil remaining on board vessel to minimum. MARPOL is a combination of different sets of rules on oil, chemicals, noxious substances in package forms, sewage and garbage as shown on each Annex. Since the Convention has globally set forth in 1973, it has amended so often whenever reasonable articles are requi-red by contracting states under guidelines of IMO. The amendments, for instance, have continuously perfo-rmed more than 8 times regarding articles, protocols, and five annexes because the original text was badly drafted as the control measures were expressed in general way. This paper, therefore, is intend to summa-rize a main point relating to each amendment, so that persons who have an interest in the Convention would be completely understand for practical implementation. Especially, for legislative purpose or annen-dement of domestic law, it could timely be contributable if specific consolidation and unified interpretations are followed with this paper. Consequently it is much more worth to study for preventing marine pollution from ship with tracing every moment whenever the Convention formally adopted through amending up-to-data.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.15-21
• /
• 1996

Recently speed control system of the towing carriage have been modified by applying a personal computer in the Ship Model Towing Tank of Seoul National University. With this system the carriage speed could be controled precisely in coincidently with a prescribed speed diagram to evaluate the effect of slight towing speed fluctuation caused by some residual current or standing waves which have believed as trivial phenomena in the towing tank. It is found that the slight speed fluctuation of the carriage could lead to serious error in measurement of resistance test of a ship.