• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.55-60
• /
• 2006

It is well known tint the ship manoeuvring motion is greatly affected by hydrodynamic forces and moments acting between two vessels passing too close to each other in confined waters, such as in a harbour or narrow channel. This interaction between two vessels could be assumed to be the functions of the longitudinal distance, transverse distance and their speeds. The aim of this study is to calculate the interaction between two vessels passing close to each other on parallel courses by simulation, and to estimate the effect of rudder action and time of collision through simulation under the condition of various longitudinal distances and different speed-ratios of the two vessels.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.167-170
• /
• 2013

The objective of this paper is to describe the result of development of collision avoidance supporting system, based on the electronic chart display and information system(ECDIS). In real ship operations, collision accidents happen frequently due to human errors such as the lax vigilance, misinterpretation of international regulations for preventing collisions at sea (COLREGs). We developed a system which will help to avoid these kind of accidents. This system can automatically recognize the risk of collisions, generate the safe alternative routes that comply with COLREGs, and then deliver the results into auto pilot. A virtual simulation assuming progressive collision situations revealed the usefulness of this system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2021

The International Maritime Organization (IMO) is promoting the introduction of e-Navigation that prevents maritime accidents by fusion of Information & Communication Technology (ICT) with ship operation technology. In Korea, Korean e-Navigation is also being developed for fishing vessels and small vessels sailing offshore, which are vulnerable to maritime accidents. However, for the successful development of Korean e-Navigation, it is necessary to develop an indicator that can evaluate the development performance so that the development performance that has been progressed so far can be evaluated and the development direction can be re-established. Therefore, this study attempted to develop an evaluation index tailored to the development goal of e-Navigation service centering on the collision accident, which is a major maritime accident. In this study, a collision accident evaluation index for e-Navigation service was developed by deriving and quantifying the root cause of maritime collision accidents using Root cause analysis(RCA) and fault tree analysis (FTA) techniques. This indicator is considered to be helpful in reducing maritime accidents as it is used as a development indicator for e-Navigation and an indicator for maritime collision accident analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.221-226
• /
• 2012

This research presents an analysis of algorithm for ship track-keeping along a given trajectory. The maneuver of a free running model ship guiding through a simple path are presented. In order to solve the above problem, a desired trajectory is usually determined by GPS points in a pre-fixed place then these points are set in a pre-programmed navigation so that the ship would be automatically tracked. Proportional-Derivative(PD) control which is useful for fast response controllers was used in this program as a course keeping system. A high accuracy GPS receiver was installed on the model ship that could provide positions frequently, the system will compare and give out the remaining distance and heading to the target way-point. The results of ship auto track-keeping experiment will be explained in order to illustrate the adjustment in controlling parameters. These results can be utilized as a preliminary step to carry out the experiment of ship collision avoidance system and automatic berthing in the future.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.661-666
• /
• 2005

Recent warnings indicate that there is a potential risk of massive earthquake. These earthquakes could produce large-scale tsunamis. Consideration of the effect of Tsunami to the moored ship is very important bemuse it brings the loss of life and vast property damage in a viewpoint of ship operations within a harbor. If a tsunami occurs, a ship in a harbor may begin drifting in case of ship entering and departing harbor, and breakage of mooring rope and drifting of moored ship are happened. And extremely serious accident, such as stranding and collision to a quay, might occur. On the other hand, since the tsunami consists of approximately component waves of several minutes, there is a possibility of resonance with the long period motion of mooring vessel. As the speed of Tsunami is much faster than tidal current in a harbor, a strong resisting force might act on the moored ships. In this paper, the numerical simulation procedure in the matter of ship motions due to the attack of large-scale tsunamis are investigated and the effects on the ship motions and mooring loads are evaluated by numerical simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.305-310
• /
• 2016

This study identified necessary navigational support services to prevent accidents through an examination and a survey on the navigation and communication systems of non-SOLAS ships. The functional and operational requirements for the identified navigational support services were discussed accordingly. Among the navigational support services proposed are an Electronic Navigational Chart (ENC) service, a route planning service, an operation monitoring service, and collision prevention support services for ships in coastal areas. To facilitate the identified navigational support services, ship navigation system, shore supporting centre and maritime communication network were discussed as a digital infrastructure. The operational methode for the digital infrastructure were discussed in the service scenarios for ships carrying dangerous cargo, large ships over 200 meters in length and high speed passenger ships over 15 knots in speed. This study will facilitate the development of policies for the improvement of ship operation management in Korean coastal waters and will contribute to improving the navigational safety of non-SOLAS ships.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.761-767
• /
• 2012

Maritime traffic assessment is important to understand the characteristics of maritime traffic and to prevent maritime accidents. The maritime traffic assessment can be calculated from the ship trajectory data observed by using AIS(Automatic Identification System). This paper developes a maritime traffic assessment tool using ship's position and speed, course, time data from ships navigating waterways. The results are represented in terms of the number of traffic quantity and traffic distribution, speed distribution, geometric collision candidates. The developed tool will contributes to advance maritime traffic safety by VTS(Vessel Traffic Services).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.93-100
• /
• 2022

The collision behaviors of the tripod and jacket structures, which are considered as support structures for offshore wind towers at the Southwest sea of Korea, were compared by nonlinear dynamic analysis. These structures, designed for the 3 MW capacity of the wind towers, were modeled using shell elements with nonlinear behaviors, and the tower structure including the nacelle, was modeled by beam and mass elements with elastic materials. The mass of the tripod structure was approximately 1.66 times that of the jacket structure. A barge and commercial ship were modeled as the collision vessel. To consider the tidal conditions in the region, the collision levels were varied from -3.5 m to 3.5 m of the mean sea level. In addition, the collision behaviors were evaluated as increasing the minimum collision energy at the collision speed (=2.6 m/s) of each vessel by four times, respectively. Accordingly, the plastic energy dissipation ratios of the vessel were increased as the stiffness of collision region. The deformations in the wind tower occurred from vibration to collapse of conditions. The tripod structure demonstrated more collision resistance than the jacket structure. This is considered to be due to the concentrated centralized rigidity and amount of steel utilized.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.481-489
• /
• 2004

Ship collisions and grounding continue to occur regardless of continuous efforts to prevent such accidents. With the increasing demand for safety at sea and for protection of the environment, it is of crucial importance to be able to reduce the probability of accidents, assess their consequences and ultimately minimize or prevent potential damages to the ships and the marine environment. Numerical simulations for actual collision problem are conducted with a special attention with respect to finite element size, fracture criteria and material properties, which require a careful consideration to improve the accuracy. A parametric analysis varying colliding speed, angle, design loading condition is conducted using nonlinear finite element analysis method for 46,00 dwt Product/chemical carrier. The relationship between the absorbed energy and indentation are derived quantitatively using the insights observed from this study, and a novel design concept for assessing the anti-collision performance are proposed.