• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.119-123
• /
• 2002

Liquefied Natural Gas(LNG) continues to attract modern gas industries as well as domestic markets as their main energy source in the recent years. This is mainly because LNG is inherently cleaner and more energy efficiency than other fuels. Offshore LNG production plant is of interest to many oil producing companies all over the world. This article discuss about the production process encountered while developing such a production facility. Typical offshore oil and gas processing required for oil stabilization and other optional units that can be added to the facilities. The production process can broadly be divided into five major units namely, (i) Oil Stabilization unit, (ii) Gas Treatment unit, (iii) Methane Recovery unit, (iv) Distillation unit and (v) LNG Liquefaction unit. The process simulation was carried out for each unit with a given wellhead composition. The topside facilities of offshore LNG production plant will be very similar to the process adopted in offshore processing platform along with the typical onshore LNG production plant. However, the process design problems associated with FPSO motion to be taken care of while developing floating LNG production plant.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.3
• /
• pp.105-114
• /
• 2018

In the past, traditional methods of research on ship maneuvering performance were estimated in calm waters. However, the course-keeping ability and the maneuvering performance of a ship can be influenced by the presence of waves. Therefore, it is necessary to understand the maneuvering behavior of a ship in waves. In this study, the force acting on a moving ship and a rudder behind the model ship will be performed in regular waves in Changwon National University (CWNU). In addition, the prediction force acting on the rudder in calm waters was carried out and compared with those of Computational Fluid Dynamics (CFD). Model test in regular wave was performed to predict the force acting on the ship and the rudder behind the model ship in various wave directions. The effects of wavelength and wave direction on hydrodynamic forces acting on the ship hull versus rudder angle is discussed.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.334-340
• /
• 2016

As Information Technology (IT) is developed constantly, big data is becoming important in various industries, including ship and offshore industry where a lot of data are being generated. However, it is difficult to apply big data to ship and offshore industry because there is no generalized platform for its application. Therefore, this study presents a big data platform based on the Hadoop for applications in ship and offshore industry. The Hadoop is one of the most popular big data technologies. The presented platform includes existing data of shipyard and is possible to manage and process the data. To check the applicability of the platform, it is applied to estimate the weight of offshore plant topsides. The result shows that the platform can be one of alternatives to use effectively big data in ship and offshore industry.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.407-416
• /
• 2016

The offshore plant industry has basically functioned with a rigid teamwork culture and many operations are managed by ship's crew, shifts and affiliates together. The marine sector of offshore plant has much similarity with ship's environment. So a person who had experienced on board will have advantages to work for offshore industry. But in spite of all that, only a few korean seafarers are able to join in the offshore industry due to lack of information about the offshore environment. This study analyze the employee's wage structure, nature of employment contract, requirements of job qualifications. Therefore, this study will assist for seafarers to set up how to get their work and also suggest to develop relevant offshore training courses by researching the gap competency matrix.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.797-805
• /
• 2019

An important problem of offshore plant process piping is equipment accidents due to the removal of fine metal debris and foreign substances in the pipes that deliver fluids such as hydraulic oil, lubricating oil and thermal oil. Temporary flushing equipment to remove debris uses fluid equipment of centrifugal pump and gear pump to prevent equipment accident of offshore platform. The equipment manufacturer requires the shipyard to have a cleanliness rating inside the pipe to meet the international standards ISO4406 and NAS1638 quality levels to prevent damage to the equipment sold. The quality of the internal flushing of pipes conforms to the regulations suggested by the equipment manufacturer. In this paper, three types of electric heater capacity, which is a method of evaporating and removing water inside a pipe during an oil flushing process, were compared. In addition, the study was conducted to remove the flushing oil in the pipe and to improve oil quality.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.689-701
• /
• 2017

In recent offshore industries, various ambiguous terms have been used without clear definition or classification, causing difficulties in legal, technical, and educational understanding and usage. For an example, the commonly used term of 'Offshore Plant' in Korea is not an universal word technically. There has been no clear technical or legal definition about the 'Offshore Plant' and its classification is also very ambiguous; sometimes it is used to refer offshore oil and gas production platform or it is used to mean offshore renewable power generation plant in some cases. To build a conceptual framework, therefore, this paper suggests a classification of offshore units (1) using internationally agreed terms, (2) agreed with the technical classification used by the ship classification society and (3) being able to include not only the current but also future concepts of offshore units.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.163-170
• /
• 2014

Domestic offshore business is oriented toward building drill-ships, FPSOs(Floating Production Storage and Off loading). But the equipments needed for offshore platforms are not so developed in Korea because the equipments can not be verified in Korean territory where the offshore platforms are not stationed. This study aims at finding some methods on entering into OSI for the maintenance and disassembly of fixed offshore platforms. Slack model is adopted to find out how slack assets could play a role in penetrating foreign markets. Firstly, entry into the South East Asian market is recommended. Secondly, forming a consortium is suggested by which taking part in offshore market can be easier. Finally, strategic plans for obtaining the technology for ship building equipments are needed as well as government support.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.3
• /
• pp.167-176
• /
• 2013

It is necessary to construct equipment catalog in ship outfitting design and offshore plant design. The three-dimensional CAD data of equipment take on different level-of-detail depending on the purpose. Equipment suppliers provide CAD data with high complexity while ship designers need CAD data with low complexity. Therefore, it is necessary to simplify CAD data. However, it takes much time to simplify them manually. To resolve the issue, a system for automatically simplifying the 3D CAD data of equipment was developed. This paper presents the architecture of the system and the implementation details. In addition, experiment result using the prototype system is explained.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.2
• /
• pp.143-151
• /
• 2019

This study describes a method for analyzing log data generated in a process using process mining techniques. A system for collecting and analyzing a large amount of log data generated in the process of manufacturing an offshore plant piping material was constructed. The analyzed data was visualized through various methods. Through the analysis of the process model, it was evaluated whether the process performance was correctly input. Through the pattern analysis of the log data, it is possible to check beforehand whether the problem process occurred. In addition, we analyzed the process performance data of partner companies and identified the load of their processes. These data can be used as reference data for pipe production allocation. Real-time decision-making is required to cope with the various variances that arise in offshore plant production. To do this, we have built a system that can analyze the log data of real - time system and make decisions.