• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.657-666
• /
• 2022

The International Maritime Organization(IMO) recommends the active implementation of national policies on technological development and energy efficiency to reduce Green House Gas (GHG) in the international shipping sector. Such IMO environmental regulation policies have a great impact on the entire shipping sector and are also a heavy burden on ship's owners. The most reasonable way to curb GHG emissions from ships comes down to the development of zero-emission ships. In other words, the development of a fuel cell ship (FCS) driven by an eco-friendly fuel is an alternative that can escape the IMO regulations. Countries in Asia, Northern America, and Europe independently develop and produce PEMFC, and are pursuing international standardization by acquiring approval in principle from an internationally accredited registration authority. Currently, there are three types of fuel cells (FC) that are recommended for ships: a Polymer Electrolyte Membrane Fuel Cell (PEMFC), a Molten Carbonate Fuel Cell (MCFC), and a Solid Oxide Fuel Cell (SOFC). In this study, PEMFC, which is expected to grow continuously in the global FC market, was analyzed domestic and international development trends, specifications, performance, and empirical cases applied to ships. In addition, when applying PEMFC to ships, it was intended to suggest matters to be considered and the development direction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.681-687
• /
• 2023

The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.47-53
• /
• 2016

WPS/PQR is the essential documents for shipbuilding welding. WPS is the document containing the information related to welding procedure and PQR is the record of approval for welding procedure. Both documents should be approved by the ship owners and the classification societies. It is very important to manage these documents because the welding procedure using these documents could not be carried out before they are approved. Database is an useful tool to manage these documents. It can manage a number of documents and show the processing status of WPS/PQR documents. In this study, all documents related to WPS/PQR documents were investigated and analyzed in the viewpoint of DB. An appropriate DB system was designed for WPS/PQR and the related documents on the basis of CBD methodology. The DB system could make WPS/PQR documents easily and shortly. The grasp of the processing status of WPS/ PQR could help the good management of fabrication schedule in shipbuilding.

• Ocean Systems Engineering
• /
• v.1 no.1
• /
• pp.31-57
• /
• 2011

Impact pressure due to sloshing is of great concern for the ship owners, designers and builders of the LNG carriers regarding the safety of LNG containment system and hull structure. Sloshing of LNG in partially filled tank has been an active area of research with numerous experimental and numerical investigations over the past decade. In order to accurately predict the sloshing impact load, a new numerical method was developed for accurate resolution of violent sloshing flow inside a three-dimensional LNG tank including wave breaking, jet formation, gas entrapping and liquid-gas interaction. The sloshing flow inside a membrane-type LNG tank is simulated numerically using the Finite-Analytic Navier-Stokes (FANS) method. The governing equations for two-phase air and water flows are formulated in curvilinear coordinate system and discretized using the finite-analytic method on a non-staggered grid. Simulations were performed for LNG tank in transverse and longitudinal motions including horizontal, vertical, and rotational motions. The predicted impact pressures were compared with the corresponding experimental data. The validation results clearly illustrate the capability of the present two-phase FANS method for accurate prediction of impact pressure in sloshing LNG tank including violent free surface motion, three-dimensional instability and air trapping effects.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.251-258
• /
• 2017

Shortage of trained seafarers is an issue, which many ship-owners are facing and, according to recent studies, the shortfall of both officers and rating will worsen in the next few years. The key role of seafarers is of fundamental importance in international trade, as they are the ones responsible for safely manning and operating ships. In developing countries, they also perform a strategic aspect in terms of contribution to GDP, mainly by earning foreign currency and increasing national consumption of goods and services. Myanmar is still considered a developing country with an economy, which has only recently started growing steady. It is also one of the major seafarers supplying nations and the contribution, which seafarers have on the national GDP may be particularly significant in comparison to other countries. This study aims at investigating seafarers' impact towards the Myanmar national economy. The paper describes the status of Myanmar seafarers, and the seafarers' current and forecasted impact towards the Myanmar economy through a regression model. The study concludes with recommendations to make Myanmar seafarers more competitive internationally and increase their economic contribution nationally.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.4
• /
• pp.491-498
• /
• 2018

The cost evaluation for voyage route planning in an ice-covered sea is one of the major topics among ship owners. Information of the ice properties, such as ice type, concentration of ice, ice thickness, strength of ice, and speed-power relation under ice conditions are important for determining the optimal route in ice and low operational cost perspective. To determine achievable speed at any designated pack ice condition, a model test of resistance, self-propulsion, and overload test in ice and ice-free water were carried out in a KRISO ice tank and towing tank. The available net thrust for ice and an estimation of the ice resistance under any pack ice condition were also performed by I-RES. The in-house code called 'I-RES', which is an ice resistance estimation tool that applies an empirical formula, was modified for the pack ice module in this study. Careful observations of underwater videos of the ice model test made it possible to understand the physical phenomena of underneath of the hull bottom surface and determine the coverage of buoyancy. The clearing resistance of ice can be calculated by subtracting the buoyance and open water resistance form the pre-sawn ice resistance. The model test results in pack ice were compared with the calculation results to obtain a correlation factor among the pack ice resistance, ice concentration, and ship speed. The resulting correlation factors were applied to the calculation results to determine the pack ice resistance under any pack ice condition. The pack ice resistance under the arbitrary pack ice condition could be estimated because software I-RES could control all the ice properties. The available net thrust in ice, which is the over thrust that overcomes the pack ice resistance, will change the speed of a ship according to the bollard pull test results and thruster characteristics (engine & propulsion combination). The attainable speed at a certain ice concentration of pack ice was determined using the interpolation method. This paper reports a procedure to determine the attainable speed in pack ice and the sample calculation using the Araon vessel was performed to confirm the entire process. A more detailed description of the determination of the attainable speed is described. The attainable speed in 1.0 m, 90% pack ice and 540 kPa strength was 13.3 knots.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.12
• /
• pp.377-401
• /
• 1999

This study is focused on the privity of the contract of carriage of goods by sea, so to speak, privity between B/L holder and carrier by transfer of bill of lading, privity by attornment to delivery order and conflict between bills of lading and charterparty terms. Under a CIF contract, possession of the bill of lading is equivalent to possession of the goods, and delivery of the bill of lading to the buyer or to a third party may be effective to pass the property in the goods to such person. The bill of lading is a document of title enabling the holder to obtain credit from banks before the arrival of the goods, for the transfer of the bill of lading can operate as a pledge of the goods themselves. In addition, it is by virtue of the bill of lading that the buyer or his assignee can obtain redress against the carrier for any breach of its terms and of the contract of carriage that it evidences. In other words the bill of lading creates a privity between its holder and the carrier as if the contract was made between them. The use of delivery orders in overseas sales is commen where bulk cargoes are split into more parcels than there are bills of lading, and this practice gives rise to considerable difficulties. For example, where the holder of a bill of lading transferred one of the delivery orders to the buyer who presented it to the carrier and paid the freight of the goods to which the order related, it was held that there was a contract between the buyer and the carrier under which the carrier could be made liable in repect of damage to the goods. The contract was on the same terms as that evidenced by, or contained in, the bill of lading, which was expressly incorporated by reference in the delivery order. If the transferee of the delivery order presents it and claims the goods, he may also be taken to have offered to enter into an implied contract incorporating some of the terms of the contract of carriage ; and he will, on the carrier's acceptance of that offer, not only acquire rights, but also incur liabilities under that contract. Where the terms of the charterparties conflict with those of the bills of lading, it is interpreted as below. First, goods may be shipped in a ship chartered by the shipper directly from the shipowner. In that case any bill of lading issued by the shipowner operates, as between shipowner and charterer, as a mere receipt. But if the bill of lading has been indorsed to a third party, between that third party and carrier, the bill of lading will normally be the contract of carriage. Secondly, goods may be shipped by a seller on a ship chartered by the buyer for taking delivery of the goods under the contract of sale. If the seller takes a bill of lading in his own name and to his own order, the terms of that bill of lading would govern the contractual relations between seller and carrier. Thirdly, a ship may be chartered by her owner to a charterer and then subchartered by the chaterer to a shipper, to whom a bill of lading may later be issued by the shipowner. In such a case, the bill of lading is regarded as evidencing a contract of carriage between the shipowner and cargo-owners.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.875-888
• /
• 2018

The Government of the Republic of Korea has been continuously improving its legal system to ensure marine safety as a precaution against marine accidents. However, despite the ongoing improvement of the legal system, the number of maritime accidents has been increasing steadily, suggesting that the efficacy of the legal system is insufficient. As for recent marine accidents, small fishing vessels (less than 10 tons) account for 44.9 % of marine accidents over 5 years ('13_'17). Therefore, this study investigated the improvement status of the Korean government's legal system for small fishing vessels and the characteristics of related overseas legal systems in order to find a way to further improve marine safety for small fishing vessels. Following the results, the Korean government's laws related to small fishing vessels show a hybrid phenomenon due to the history of merging ('97) and separation ('09) of legal systems for fishing and non-fishing vessels, and it has been concluded that only improvements to construct additional facilities are being performed, and those in a fragmentary manner. In addition, overseas legal systems for small fishing vessels were confirmed to have requirements strengthening the responsibility of owners and operators of fishing vessels and introduced a self-inspection program. Based on these results, a plan is suggested to improve the efficacy of the legal system to ensuree marine safety for small Korean fishing vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.432-438
• /
• 2017

The primary objective of the current work was to develop a standardized retrofit hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used for assessment of effective power. Three retrofit hull forms with minimum resistance were selected given real operating conditions. These vessels were named after customized ready-made hull forms to enable ship owners to make easier choices. The effective power of each vessel was estimated under real operating conditions. Subjects were operated with the lowest draft, and performance for retrofit No. 3 showed an 11-16% improvement in effective power at low speed ranges of 16-18 knots compared to existing vessels. When operated with a middle draft, performance for retrofit No. 3 showed a 6-11% improvement in effective power at low speed ranges compared to existing vessels. When operated with the highest draft, performance for all vessels showed little difference in effective power.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.257-274
• /
• 2012

Since service competition among global supply chains became intensified, market-oriented system, instead of the existing cost-based system, for port service pricing has been strongly recommended in order to enhance their long-term viability and competitiveness. The Owen value of cooperative game frameworks allows us to apply a market-oriented pricing theory for the port pricing in the case of Gwangyang port to verify its usefulness. The analytical results of this paper suggested some solutions in the problem of berth-based cost allocation by a characteristic function and also showed the proper relative weights of factors to derive the quay use index by Budescu(1993). We also suggested a favorable port pricing system to major shipping firms as well as a discount port pricing system for their strategic alliance. To put it differently, the results of this study enable the port managers to make out some strategic port pricing system like the reasonable discount in port charge for the larger ship owners using the ports frequently.