• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.1
• /
• pp.95-101
• /
• 2000

In general, free form design depends on B-spline which is used for the generating hull lines in most of shipyards. But, nowadays, the NURBS method is applied to free form modeling method, which is able to more flexible transformation than B-Spline, and then became industrial standard in the various field. Therefore, this method has been considerably applied in new application fields which are required free form modelling. In this paper, the program called 2DSURF with 5 modules and developed for the generation of hull lines is described. It is examined whether the program can be applied to body lines, sheer lines, and half breadth lines.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.

• Proceedings of the CALSEC Conference
• /
• 1999.07b
• /
• pp.509-519
• /
• 1999

STEP은 제품모델 정보를 서로 다른 CAD 시스템에서 교환할 수 있게 하기위한 중립형식의 국제표준으로서 CALS/EC의 구현을 위해 필수적인 핵심기반 기술이다. 선박 관련 STEP은 지금까지 미국과 유럽의 여러 연구사업을 통해 개발되어 오고 있으며 AP215(선박구획배치), AP216(선박선형), AP217(선박배관), AP218(선박구조)은 올해 안에 CD(Committee Draft) 안이 완성될 예정이다. 우리나라는 일본과 함께 세계 조선시장을 양분하고 있는 조선 강국이면서도 관련 정보기술의 낙후로 STEP 기술 개발에는 미온적이었으나 최근 선박해양공학분소에서 과기부의 특정과제로 수행하는 KS-STEP 과제를 통하여 ATS 318 (AP218, 선박구조의 ATS) 개발 책임을 맡게되어 본격적인 관련 연구를 시작하게 되었다. 여기에서는 ATS 318 개발을 위해 조선소와 선급 등 선박관련 업체들의 기술 정보 교환 프로세스를 분석하여 나타내었다. 각 프로세스에서 요구되는 기술정보의 형태와 추상화 정도가 분석되고 선박 STEP AP들의 기반 구조인 SCM(ship common model)에서 어떻게 그들 특성을 지원해야 하는지를 검토하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.522-525
• /
• 2011

지금까지 제조업에서는 CAx(CAD, CAE, CAM) 시스템을 중심으로 설계와 생산의 효율성 증대를 이뤄왔다. 최근에는 제품을 중심으로 PLM(Product Lifecycle Management), 디지털 메뉴팩처링(Digital Manufacturing) 등의 개념을 도임하고 있으며, 이를 기반으로 설계와 생산의 효율성 증대뿐만 아니라, 디지털 제품을 중심으로 하는 제품 개발환경 구축을 통해 제조업의 불변과제 해결과 경쟁력 확보를 위해 노력하고 있다. 본 논문에서는 함정 설계와 정보 관리를 위한 프로세스 및 프레임워크 연구를 수행한다. 그리고 함정획득에 SBA 개념을 적용하기 위한 인프라스트럭쳐에 대해 연구를 수행한다. 객체 지향 개발방법론의 요구사항 분석법에 기반을 둔 SBA(Simulation-Based Acquisition) 프레임워크 정의 방법론을 정립하고 이를 바탕으로 3 차원 함정제품모델 중심의 획득업무 분석을 통해 SBA-NS 아키텍처와 함정제품정보(NSPI : Naval Ship Product Information) 참조모델을 정의하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.109-117
• /
• 2000

In order to develope ship hull forms. many various models are represented numerically in terms of B-spline surfaces and tested experimentally in the towing tank. It is very difficult to make various ship hulls with free forms in handiwork. As the first step of development of a free form cutting machine which becomes a good substitute for high-priced model cutting machines, free forms representation for model cutting are developed. In this paper, NURBUS surfaces are represented on the assumption that data points may be control points contrary to existing methods.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.214-222
• /
• 2012

The shipbuilding process is changing due to changes in the development environment and technological requirements for military ships. This would also hold true for a submarine, because its shipbuilding process includes complicated design and construction conditions. System improvement efforts for the design and construction of military ships have continued with the goal of overcoming these conditions. At present, the Korea Navy is developing a 3,000 ton-class Korean type submarine, and its design is progressing by the introduction of a full 3D-ship CAD system. Although the 3D modeling system was introduced for effective design realization through the introduction of collaborative design and active utilization of M&S (modeling and simulation), the introduction effects are not yet generally obvious, according to the characteristics of ship design. The present paper discusses the collaborative environment for developing a submarine to enhance this. This paper proposes the architecture and data structure of a system for realizing collaborative design and discusses a case system developed on the basis of this.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.97-105
• /
• 2020

In order to set up radar cross section(RCS) reduction factors for a target, the scattering point position of the target should be identified through inverse synthetic aperture radar(ISAR) image analysis. For this purpose, ISAR image focusing is important. Maritime ship is non-linear maneuvering in the sea, however, which blur the ISAR image. To solve this problem, translational and rotational motion compensation are essential to form focused ISAR image. In this paper, hourglass and ISAR image analysis are performed on the collected data in the sea instead of using the prediction software tool, which takes much time and cost to make computer-aided design(CAD) model of the ship.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.613-627
• /
• 2010

Ships and off-shore plants have very long lifecycles. Design data of ships and off-shore plants are used as master data in the subsequent phases after the design phase. Therefore, it is an important issue how to convert native design data generated from commercial shipbuilding CAD systems into neutral data with the use of international industrial data standards. International standard-based exchange of ship outfitting and off-shore plant data needs the construction of a library for specifications data of equipment and materials and the provision of external referencing mechanism for retrieving data stored in the library. This paper proposes an approach to construct a specifications data library with the use of ISO 15926 process plants. This library is used for providing specifications data through external referencing when translating ship outfitting data from TRIBON system into ISO 10303 STEP AP 227-formed data.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.203-211
• /
• 2014

To raise the industrial competitiveness in the field of ship-building, it is crucially important that the yard should use production facilities and working space effectively. Among the related works, the management of tremendous blocks' number, the limited area of assembly shops and inefficient personnel and facility management still need to be improved in terms of being exposed to a lot of problems. To settle down these conundrums, the various strategies of block arrangement on the assembly floors have been recently presented and in the results, have increasingly began to be utilized in practice. However, it is a wonder that the sampled or approximated block shapes which usually are standardized projections or the geometrically convex contour only have been prevailed until now. In this study, all parts including the panel, stiffeners, outer shells, and all kinds of outfitting equipment are first extracted using the Volume Primitive plug-in module from the ship customized CAD system and then, the presented system constructs a simpler and more compact ship data structure and finally generates the novel projected contours for the block arrangement system using the adaptive concave hull algorithm.