• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.167-171
• /
• 2003

Acoustic characteristics of baffled combustion chamber to elucidate suppressing effect of baffle on combustion instability are numerically investigated by linear acoustic analysis. A hub-blade baffle of 5 blades is selected as a candidate one and five variants of baffles with various configuration are designed. Resonant-frequency shift and damping factor are analyzed quantitatively as damping parameters. When the hub is located radially at the pressure node, the decrease of resonant frequency and increase of damping factor in 1R mode are dominant. But sub-1T mode is formed within hub, therefore, there would be a possibility of initiating 1T mode in unbaffled region, which would occur another problem. For smaller hub size, four kinds of axial baffle length is selected. As the axial baffle length increases, resonant frequency shift and increase of damping factor of transverse acoustic modes is obtained. Especially, two close acoustic modes such as 1L and 1T could be overlapped for a certain axial length, resulting in extreme increase of damping factor. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1700-1706
• /
• 2016

To improve the number of simultaneous transmissions of machine-to-machine traffic in a spread spectrum ALOHA channel, we propose a new spreading technique called doubly truncated cyclic code shift keying (DTCCSK). By truncating the codeset of cyclic code shift keying, DTCCSK freely adjusts the spreading factor and the symbol length. As a result, DTCCSK exhibits both a high spectral efficiency of M-ary signaling and low implementation complexity of a direct sequence.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.54-60
• /
• 2018

The data acquired from seismic exploration can be used to detect the existence of oil and gas resources through appropriate processing and interpretation. The seismic attributes indicating the existence of resources are extracted from amplitude information, where the Q-factor representing intrinsic attenuation plays an useful role of hydrocarbon indicator. So, the accuracy of Q-factor estimation is very important to investigate the existence of resources. In this study, we calculated the Q-factor and analyzed the error rate through a numerical example. To mimic real data, random noise was added to the synthetic data. With the noise-added data, the Q-factor was estimated and the error rate was analyzed by using the spectral ratio method (SRM) and peak frequency shift method (PFSM). Both methods provided a relatively accurate Q-factor when the signal-to-noise ratio was 90 dB. However, the peak frequency shift method (PFSM) produced better results than the spectral ratio method (SRM) as the level of random noise increased.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.3
• /
• pp.356-364
• /
• 2011

Purpose: This descriptive study was to examine the effect factors on health promotion lifestyle of shift work nurses. Methods: The 418 working nurses who completed questionnaires with consent were analysed. Results: The average level of health promotion lifestyle of shift work nurses was 2.21 and it was significantly lower than 2.36 of fixed work nurses. In shift work nurses, the highest health promotion lifestyle was personal relationship of 2.79 and the lowest was physical activity of 1.58. The young, shorter shift work duration, unmarried and general nurses were evaluated as not-healthy diet. The old, longer shift work duration and married showed less physical activity. Less self-efficacy and more job stress, depression, fatigue showed lower health promotion lifestyle. Conclusion: Self-efficacy on health behavior of shift work nurses was the most effective factor on all areas of health promotion. Therefore, we need to develop a health promotion program including self-efficacy encouragement. We suggest that this program be more effective when more precisely characterized according to age, marital status, shift work duration, job position, and psychological problems such as depression and fatigue.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.91-104
• /
• 2005

Tolerance analysis plays an important role in design and manufacturing stages for reducing manufacturing cost by improving producibility. In most production processes encountered in practice, a process mean may shift or drift in the long run although process is in control. This study discusses the feasibility of three most common inflation factors(Bender, Gilson and Six Sigma) as a correction to Root Sum of Squares(RSS) method to compensate heuristically for a shift of process mean and nonnormal component distributions from simulation experiments and proposes the guidelines for choosing the inflation factor.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.583-591
• /
• 2014

In wireless communications, knowledge of the signal-to-noise ratio is required in diverse communication applications. In this paper, we derive the variance of the maximum likelihood estimator in the data-aided and non-data-aided schemes for determining the optimal shrinkage factor. The shrinkage factor is usually the constant that is multiplied by the unbiased estimate and it increases the bias slightly while considerably decreasing the variance so that the overall mean squared error decreases. The closed-form biased estimators for binary-phase-shift-keying and quadrature phase-shift-keying systems are then obtained. Simulation results show that the mean squared error of the proposed method is lower than that of the maximum likelihood method for low and moderate signal-to-noise ratio conditions.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1711-1719
• /
• 2005

In an electro statically actuated nanoelectromechanical system (NEMS) resonator, it is shown that both the resonance frequency and the resonance quality (Q) factor can be manipulated. How much the frequency and quality factor can be tuned by excitation voltage and resistance on a doubly-clamped beam resonator is addressed. A mathematical model for investigating the tuning effects is presented. All results are shown based on the feasible dimension of the nanoresonator and appropriate external driving voltage, yielding up to 20 MHz resonance frequency. Such parameter tuning could prove to be a very convenient scheme to actively control the response of NEMS for a variety of applications.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.3
• /
• pp.125-130
• /
• 2018

Arc lamps are now widely utilized as illumination sources for a large number of investigations in wide-field fluorescence microscopy. Among many power converters for the lamp, the PSFB (Phase-Shift Full-Bridge) converter with the ZVS (Zero Voltage Switching) is the most widely used soft switched circuit in high-power applications. Also, in the most luminaries, the power factor has to be more and more important. Thus, the power factor correction(PFC) must be included in the power system. A new igniter module using the switching power device and the transformer is proposed instead of the conventional igniter using the mechanical contactor. The proposed converter with the high power factor and high efficiency is verified through the experimental works.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.521-527
• /
• 2011

Korea announced GHG reduction goal, 30% reduction compare with 2020 BAU and reduction target for each industry sector is planning. Transportation sector also trying to make effective technical and political counterplan of allocated GHG reduction target such as material lightening, energy efficiency improvement and Modal shift technology and so on. Modal Shift is shifting low energy efficiency vehicle to high energy efficiency vehicle which is economically meaningful under current market conditions. We can get not only energy efficiency improvement but also GHG reduction effect through modal shift. Modal Shift is effectively applying and studied in logistics field in Europe and Japan and one of the Indian companies has been registered CDM project activity involving modal shift from roadways to railways for finished goods. In this study, the scenarios are developed with detail modal shift ratio and fuel type base on state of road and rail use and GHG emission factor for each fuel type from MLTM. This result can be used as basic information to improve policies and promote increasing use of train which is more environment friendly transportation vehicle.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.112-123
• /
• 2010

The paper gives an overview of the problems to be tackled nowadays by occupational health with regards to shift work as well as the main guidelines at organizational and medical levels on how to protect workers' health and well-being. Working time organization is becoming a key factor on account of new technologies, market globalization, economic competition, and extension of social services to general populations, all of which involve more and more people in continuous assistance and control of work processes over the 24 hours in a day. The large increase of epidemiological and clinical studies on this issue document the severity of this risk factor on human health and well being, at both social and psychophysical levels, starting from a disruption of biological circadian rhythms and sleep/wake cycle and ending in several psychosomatic troubles and disorders, likely also including cancer, and extending to impairment of performance efficiency as well as family and social life. Appropriate interventions on the organization of shift schedules according to ergonomic criteria and careful health surveillance and social support for shift workers are important preventive and corrective measures that allow people to keep working without significant health impairment.