• 한국방사선학회논문지
• /
• 제15권2호
• /
• pp.101-108
• /
• 2021

CT는 인체 내 장기의 해부학적 구조를 정확하게 나타낼 수 있으며, 영상의 분해능이 우수하다. Brain CT 검사 시 수정체의 방사선 감수성이 높아서 피폭의 영향을 많이 받는다. 본 연구는 수정체에 피폭선량을 감소하기 위해 비스무스와 텅스텐 필라멘트 차폐물질을 사용하여 Non-shield와 Shield에 대한 피폭선량의 변화와 차폐율을 비교 하고자 한다. 본 연구에서는 3D printing으로 제작한 비스무스, 텅스텐 필라멘트 차폐물질을 사용하여, 차폐물질 두께와 slice에 따라 피폭되는 선량을 측정하였다. 헤드팬텀을 고정시켜 안구에 Magicmax universal 선량계를 위치시켜 차폐 물질을 놓지 않았을 경우와 그 위에 차폐 물질을 놓았을 때 차폐율을 각각 비교하기 위해 두 물질을 1mm ~ 5mm 두께로 각각 측정하였다. 1 mm 두께의 필라멘트에서 비스무스 필라멘트는 26.8 %, 텅스텐 필라멘트는 43.1 % 차폐율이 나타났다. 따라서 비스무스 필라멘트보다 텅스텐 필라멘트에서 더 큰 차폐효과가 나타났다. 차폐체의 종류, 두께, 슬라이스 간격에 따라 선량을 측정한 결과, 비스무스 필라멘트 보다 텅스텐 필라멘트가 더 큰 차폐효과가 나타났다.

• Nuclear Engineering and Technology
• /
• 제2권3호
• /
• pp.149-161
• /
• 1970

국내에서 산출되는 광물골재를 사용하여 방사선 차폐용 중차폐 콘크리트를 제조하고 감마선에 대한 차폐효능을 규명하는 동시에 방사선 차폐체로서의 활용가능성을 검토하였다. 10여종의 각기 다른 광물골재를 수집하여 방사선 차폐용 골재로서의 사용타당성을 검토하기 위한 물리시험과 화학분석이 실시되었고 이 결과를 토대로 최적한 골재를 선택하여 중차폐 콘크리트가 제조되었다. 차폐용 콘크리트를 제조하는데 골재의 배합비, 물-세멘트 비율, 세골재, 조골재 비율 등을 달리해주므로써 방사선 차폐효과가 달라지는 현상을 실험적으로 구해 보았고 그 결과 차폐체의 비중이 높고 균질성이 좋은 중차폐체의 설계 조건을 유도해 낼수 있었다. 각기 다른 중차폐체에 대한 차폐효능 실험은 60Co 감마선원을 사용한 방사선 투과시험법으로 구했다. 실험을 통하여 중차폐체에 대한 방사선 차폐능과 차폐콘크리트의 비중, 차폐가격등을 분석하므로써 차폐설계상 최적의 공간배치로서 가장 경제적으로 차폐치를 설계할 수 있는 최적의 조건을 얻을 수 있었다.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.234-239
• /
• 2015

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, $Fe_2O_3$, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, $Fe_2O_3$ and C-Ni samples.

• 한국건축시공학회지
• /
• 제21권5호
• /
• pp.459-468
• /
• 2021

건축물의 외벽 등에서 전자파를 차단하게 되면 건축물 안의 전자기장의 강도를 효과적으로 감소하게 되어 전자파 장해의 감쇠를 가져오므로 이에 대한 기술 개발에 관심이 크다. 본 연구에서는 반도체 분야에서 발생되는 SiC 부산물과 흑연을 선정하였고 분쇄 등 전처리 후 모르타르에 혼입하여 물성 및 전자파 차폐 성능을 평가하였다. 각 차폐 소재의 경제성을 고려하여 실험체 최외측 10% 부피만 각각의 차폐 소재를 혼입하여 차폐 성능을 평가하였고 차폐 효과 평가식을 활용하여 실험체 전체 부피에 차폐 소재를 혼입한 실험체를 제작할 경우 차폐 성능을 예측하였다. 실험 결과, SiC 알갱이 형태의 차폐 소재 혼입 시차폐 성능은 최대 20dB, 흑연 분말을 차폐 소재로 혼입 시 차폐 성능은 최대 18dB, SiC 분말을 차폐 소재로 혼입 시 차폐 성능은 최대 28dB로 예측 되었고 99.9%의 차폐율을 갖는 것으로 알려진 30dB에 근접한 우수한 차폐 성능을 가지는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.279-283
• /
• 2016

In this study, we intended to achieve both antibacterial properties and electromagnetic shielding using the Al-doped ZnO (AZO) films. FTS (Facial Target Sputtering) magnetron sputtering was used for the AZO thin films instead of the conventional RF sputtering because the FTS sputtering could avoid the damage for the plasma as well as fabrication of thin films with a high quality. The 300-nm thick AZO thin films grown on glass substrate showed a resistivity of about $7{\times}10^{-4}{\Omega}-cm$ and a transmittance of about 90% at a wavelength of 550 nm. AZO thin films were investigated for the electromagnetic shielding effectiveness measured by 2-port network method at 1.5 ~ 3 GHz. The AZO (300 nm)/glass films showed an EMI shielding effectiveness of approximately 27 dB. An antibacterial effect was measured by the film attachment method (JIS Z 2801). The percent reductions of bacteria by AZO films were 99.99668% and 99.99999% against Staphylococcus aureus and Escherichia coli, respectively.

• 소성∙가공
• /
• 제22권6호
• /
• pp.334-339
• /
• 2013

Direct Laser Melting is a prototyping process whereby a 3-D part is built layer wise by melting the metal powder with laser scanning. This process is strongly influenced by the shielding gas and the laser operating parameters such as laser power, scan rate, layering thickness, and rescanning. The shielding gas is especially important in affecting the microstructure and mechanical properties. In the current study, fabrication experiments were conducted in order to analyze the effect of shielding gas on the forming characteristics of direct laser melting. Cylindrical parts were produced from a Fe-Ni-Cr powder with a 200W fiber laser. Surface quality, porosity and hardness as a function of the layering thickness and shield gas were evaluated. By decreasing the layering thickness, the surface quality improved and porosity decreased. The selection of which shield gas, Ar or $N_2$, to obtain better surface quality, lower porosity, and higher hardness was examined. The formability and mechanical properties with a $N_2$ atmosphere are better than those parts formed under an Ar atmosphere.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1230-1236
• /
• 2016

This study aims to determine the effect of fly ash with a high replacing ratio of clay on the radiation shielding properties of bricks. Some interaction parameters (mass attenuation coefficients, half value layer, effective atomic number, effective electron density, and absorption efficiency) of clay fly ash bricks were measured with a NaI(Tl) detector at 661.6 keV, 1,173.2 keV, and 1,332.5 keV. For the investigation of their shielding behavior, fly ash bricks were molded using an admixture to clay. A narrow beam transmission geometry condition was used for the measurements. The measured values of these parameters were found in good agreement with the theoretical calculations. The elemental compositions of the clay fly ash bricks were analyzed by using an energy dispersive X-ray fluorescence spectrometer. At selected energies the values of the effective atomic numbers and effective electron densities showed a very modest variation with the composition of the fly ash. This seems to be due to the similarity of their elemental compositions. The obtained results were also compared with concrete, in order to study the effect of fly ash content on the radiation shielding properties of clay fly ash bricks. The clay fly ash bricks showed good shielding properties for moderate energy gamma rays. Therefore, these bricks are feasible and eco-friendly compared with traditional clay bricks used for construction.

• 한국전자파학회지:전자파기술
• /
• 제2권3호
• /
• pp.17-25
• /
• 1991

자기부상열차 시스템에서의 자속 누설은 주로 부상용 전자석과 리니어 모터, 안내용 전자석으로 부터 발생하 여 intra - system 및 inter - system EMI 현상과 biological effect을 야기할 수 있다. 본 논문에서는 누설 자속의 크기에 영향을 주는 각종 요소들을 고려하여 열차 주위에 분포하는 자기장의 세기를 계산하였으며, 여기서 얻어진 결과를 이용하여 차제 바닥과 측면에 사용되는 구조물의 재질과 위치에 따른 최소 두께를 계산하여 자기장 차폐를 위해 차체 무게가 증대되는 것을 최소로 할 수 있는 방법을 제시하였다. 이 결과를 한국해사기술연구소에서 설계제작한 2인승 자기부상열차 모형에 적용하여 열차 모형 주위의 자속 밀도에 대한 등자위선을 구하고, 이때의 최소 차폐 두께를 제시함으로써 차폐 재료의 무게에 대해 50% 이상의 감량이 가능하였다.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.87-92
• /
• 2014

Recently, use of thick Al 5083 plate has increased in production of LNG storage tank. In general, multi-pass welding has been used to achieve sufficient penetration in thick plate welding. High current welding which enables high deposition and deep penetration is preferred in thick plate welding because the increase of number of pass increases manufacturing cost and formation of weld defect. In this study, welding characteristics according to various Ar/He shielding gas composition was investigated in high current MIG welding. The bead-on-plate welding and V groove welding were conducted on Al 5083 alloy with a thickness of .25 mm. The effect of shielding gas composition on bead shape was evaluated and proper shielding gas composition was proposed. Also arc stability was examined under selected shielding gas composition. One side-one pass welding experiments were conducted for V groove specimen with a thickness of 25 mm. Mechanical properties and hardness profiles were measured for the V groove specimens.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권6호
• /
• pp.629-633
• /
• 2021

This article is designed to look into the radiation exposure dose to each body part and the shielding effect for workers using an additional shielding to reduce their radiation exposured by scattering radiation which is generated in a space between the operating table and lead curtain during interventional radiology(IR) procedures. After placing a human phantom on the table of SIEMENS' angiography machine, the following measurements were taken, depending on the presence of an additional shield of lead equivalent of 0.25 mmPb, manufactured for this purpose: dose to gonad, dose to an area where the personal dosimeter is placed, and dose to an area of eye lens is located. An ion chamber(chamber volume 1,800 cc) was utilized to measure scattering radiation. The two imaging tests were carried out as follows: fluoroscopy of the abdomen (66 kV, 100 mA, 60 seconds) and of the head (70 kV, 65 mA, 60 seconds); and digital subtraction angiography(DSA) of the abdomen (67 kV, 264 mA, 20 seconds) and of the head (79 kV, 300 mA, 20 seconds). In all the experiments, the shielding efficiency of the gonad position was the largest at 59.8%. In case an additional shielding was used as protection against scattering radiation that came through the operating table and the lead curtain during an IR, the radiation shielding efficiency was estimated to be up to 59.8%, leading to a conclusion that its presence may effectively reduce the radiation exposure dose of medical staffs.