• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.211-214
• /
• 1999

The stress distribution around the cutout of composite cylindrical shells with a circular or elliptical reinforced cutout subjected to axial compression or tension is studied by asymptotic method. Analytical solutions used a Donnell type orthotropic shell theory are presented by the defined stress concentration factor and are compared to experimental results. The experiment used the universal testing machine (UTM), strain gage and fixtures designed/manufactured for axial tension test of a cylindrical shell is carried and the composite material used in the experiment is plain weave glass fiber reinforced plastic (GFRP).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.205-210
• /
• 1997

The analysis of the free vibrations of a circular cylindrical shell with a logitudinal, interior rectangular plate is performed. The natural frequencies and the mode shapes of the combined shells are experimentally obtained by impact testing using an impact hammer and an accelerometer. The effects of the position of the plate on the frequencies and mode shapes of the combined system are examined. The experimental results are compared with a finite element analysis and show good agreement.

• 한국패류학회지
• /
• 제23권1호
• /
• pp.105-154
• /
• 2007

We have investigated introduced foreign molluscs into Korea since 1993. A total of 2,338 species of 157 families were investigated. Among them, 2,013 species of 106 families were gastropods, 307 species of 44 families were bivalves, nine species of two families were scaphopods, and nine species of four families in cephalopods. 2,128 species were newly given Korean name.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.3-8
• /
• 1990

A new finite element technology based on p-version of F.E.M. is discussed with reference to its potential for application to stress intensity factor computations. In linear elastic fracture mechanics, especially cracked cylindrical shells. It is shown that the p-version nutlet is far better suited for computing the stress intensity factors than the conventional h-version models with the help of three test problems. The main advantage of this technology is that the accuracy of approximation can be established without mesh refinement or the use of special procedures.

• 한국동물학회지
• /
• 제2권1호
• /
• pp.29-33
• /
• 1959

In this paper, the author reported 9 unrecorded species of molluscan shells which were collected by the author in Korea during the period from 1953 to 1958. They were 8 species of GAstropoda and 1 species of Pelecypoda as follows : 1. barbatia (Spinearca) interplicata(Grabau et King) 2. Trochus sacellum Philppi 3. Phalium strigatum (Gmelin) 4. Neverita (Glossaulax) reiniana (Dunker) 5. Searlesia nodesta (Gould) 6. Terebra evoluta Deshayes 7. Narona nodulifera(Sawerby) 8. Glavus jeffreysii (Smith) 9. Ceratosuoma fournieri(Crosse)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.215-218
• /
• 2005

Three series of 36 short square columns confined by wraps, full shells and partial shells were tested by varying the thickness of GFRP laminates. An assessment of the effectiveness of the existing model on confinement of concrete columns with FRP was made. Test results indicated moderate increases in strength, but significantly enhanced deformability compared with those in unconfined concrete, particularly the warp and full shell confinement.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.486-488
• /
• 2009

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.9-12
• /
• 2000

This paper deals with the torsional buckling behavior of plain weave GFRP composite cylindrical shells having comparatively small length-to-diameter ratio. Boundary conditions corresponding to clamped ends and simply supported ends are considered. Torsional buckling loads and circumferential mode numbers according to the variation of shell length-to-radius ratio are conformed. To verify the availability of the theoretical results, comparison with the theoretical and experimental results are made.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.1-3
• /
• 2009

• 한국국방경영분석학회지
• /
• 제16권1호
• /
• pp.56-66
• /
• 1990

Expert systems are in an early evolutionary phase, but it already has significant impacts on business operations. More and more organizations are becoming interested in applying expert systems as solutions to their business problems. This paper describes how systems started, what is their current situation, and what are their application areas. It outlines what is expert system and how to develop an expert system. And it analyzes expert system shells and shows some current available expert system shells. Lastly, it concludes and predicts the main attributes of the future expert systems.