• Korean Journal of Agricultural Science
• /
• v.29 no.1
• /
• pp.44-54
• /
• 2002

The fresh eggs of African ostrich in Korea were used in this study to investigate their interior and exterior quality characteristics. In ostrich egg shape characteristics, long and short length were measured as 15.1~16.1 cm and 12.1~13.6 cm, respectively. The egg shape index was calculated as 81.0 and the egg shell showed a more g loss white in color than that of hen egg. Calculated breaking strength of egg shell and egg shell surface based on the equation were $41.155kg/cm^3$ and $804.7cm^2$, respectively. Average egg shell thickness including egg shell membrane was 1.89 mm and there are no differences among parts of the shell. The egg shell membrane thickness was 0.10 mm showing relatively thick in equator compared with that of blunt end. The ave rage number of egg shell pores was counted as $19.7/cm^2$ showing relatively high number of egg shell pores at point end and the total number of egg shell pores in an egg was estimated as 15,241. The relative port ion of each parts based on egg weight was estimated as 25.1% for egg yolk, 58.2% for egg white, 16.7% for egg shell and the ratio of egg yolk to egg white (Y/W) was 0.43. The average diameter and the ave rage height of ostrich egg white were 19.7 cm and 13.2 mm, respectively. Calculated the H.U (Haugh Unit) was -69.7 and the pH was 8.3. In ostrich egg yolk, the diameter, the height, the egg yolk index, and it's pH were calculated as 14.4 cm, 29.4 mm, 0.20, and 6.6, respectively. And the egg yolk color showed a more thin in yellow chroma compared with that of hen egg as due to it's thicker membrane.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1164-1170
• /
• 2008

In this study, the effects of propolis and vitamin C (L-ascorbic acid) supplementation in diets were investigated on feed intake (FI), body weight (BW), body weight gain (BWG), feed conversion rate (FCR) and digestibility and on egg production and qualities (weight, mortality, shell thickness) in laying hens exposed to heat stress. A total of 150 Hyline White Leghorn, aged 42 weeks, hens was divided into five groups of 30 hens. Chicks were randomly divided into 1 positive control, 1 control and 3 treatment groups. The chicks were kept in cages in temperature-controlled rooms at $22^{\circ}C$ for 24 h/d (positive control, Thermoneutral, TN group) or $34^{\circ}C$ for 9 h/d from 08.00-17.00 h followed by $22^{\circ}C$ for 15 h (control, heat stress, HS group) and fed a basal diet or basal diet supplemented with vitamin C (250 mg/kg of L- ascorbic acid/kg of diet) or two levels of propolis (2 and 5 g of ethanol extracted propolis/kg of diet). Increased FI (p<0.05) and improvement in FCR (p<0.05), hen day egg (p<0.05) and egg weight (p<0.05) were found in Vitamin C and propolis-supplemented laying hens reared under heat stress conditions. Mortality rate was higher in the control group than TN, vitamin C and propolis groups (p<0.05). Digestibility of dry matter, organic matter, crude protein and ether extract improved with increasing of both dietary vitamin C and propolis (p<0.05). Vitamin C or propolis supplementation did not affect either the percentage shape index, yolk index or haugh unit and albumen index (p>0.05). However, the egg shell thickness and egg shell weight appeared to be increased in Vitamin C and propolis groups in comparison to HS group birds (p<0.05). In conclusion, dietary supplementation of laying hens with anti-oxidants (vitamin C and propolis) can attenuate heat stress-induced oxidative damage. These positive effects were evidenced by increased growth performance and digestibility, improvement of egg shell thickness and egg weight in comparison to non-supplemented birds. Moreover, supplementation with propolis (5 g/kg diet) was the most efficient treatment.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.1
• /
• pp.49-58
• /
• 2017

The result of the previous work leads to the idea that the inner area of the hyperbolic shell generator should be minimized for the cooling tower with higher first natural frequency. In this study the inner area of the hyperbolic shell generator was graphically established under varying height of the throat and angle of the base lintel. From the graph, several shell geometries were selected and analysed in the aspect of the natural frequency. Three representative towers reinforced differently due to different first natural frequencies were analysed non-linearly and evaluated using a damage indicator based on the change of natural frequencies. The results demonstrated that the damage behaviour of the tower reinforced higher due to a lower first natural frequency was not necessarily advantageous than the others.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.334-345
• /
• 1997

Reliability-based design approaches are needed for cylindrical shell structure whose design and operational experiences are few and which are subjected to external loads of random loads. In designing new type of structure, it is very difficult to evaluate the safety factors due to lack of previous design data and operational experience. To solve the above mentioned problem, much attention is being focussed on rational reliability based design approaches. This paper deals with weight-optional reliability-based design of cylindrical shell structure subjected to structural reliability constraints taking into account of the effect of local buckling and interactive behavior between local and global buckling. Present mentioned is compared with the exiting optional design method based only on safety factors. Numerical simulation reveals that the present method leads to lighter structure (4% reduction in weight compared to the existing optimal design) with the same reliability index. For larger structures with more number of structural members and possible failure modes, the present W0RBD procedure will be an efficient tool in designing cost-effective rationalized economic design.

• The Korean Journal of Malacology
• /
• v.26 no.3
• /
• pp.201-209
• /
• 2010

The investigated of survival rate, sex ratio, condition index, gonad development frequency, gonad index, fertilization rate, hatching rate and time required development of D shape larvae of the ark shell, Scapharca subcrenata. Survival rate was lower in heating group compared with control group (P < 0.05). Sex ratio (female:male) observed 1:0.97 in control group, 1:0.62 in heating group. Condition index was significantly higher in heating group than control group (P < 0.05) and higher increased more than water temperature $17^{\circ}C$ of heating group. Gonad development observed slow in control group but more than ripe stage 80% in heating group (21-28 day, $20^{\circ}C$). Gonad index was higher in heating group compared with control group (P < 0.05). Fertilization rate and hatching rate of the ark shell was observed $82.17{\pm}3.55%$ and $63.57{\pm}2.36%$, respectively. The time required development of D shape larvae of the ark shell was observed 15 hour after fertilization. The suggested that results of the ark shell by heating were effective sex maturation and normal egg development.

• Steel and Composite Structures
• /
• v.28 no.6
• /
• pp.735-748
• /
• 2018

In this study, the semi-analytical finite strip method is adopted to examine the free vibration of cylindrical shells made up of functionally graded material. The properties of functionally graded shells are assumed to be temperature-dependent and vary continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of ceramic and metal. The material properties of the shells and stiffeners are assumed to be continuously graded in the thickness direction. Theoretical formulations based on the smeared stiffeners technique and the classical shell theory with first-order shear deformation theory which accounts for through thickness shear flexibility are employed. The finite strip method is applied to five different shell theories, namely, Donnell, Reissner, Sanders, Novozhilov, and Teng. The approximate procedure is compared favorably with three-dimensional finite elements. Finally, a detailed numerical study is carried out to bring out the effects of power-law index of the functional graded material, stiffeners, and geometry of the shells on the difference between various shell theories. Finally, the importance of choosing the shell theory in simulating the functionally graded cylindrical shells is addressed.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.651-676
• /
• 2022

Most of the experimental, theoretical, and numerical studies on the stability of functionally graded composites are deterministic, while there are full of complex interactions of variables with an inherently probabilistic nature, this paper presents a non-intrusive framework to investigate the stochastic nonlinear buckling behaviors of porous functionally graded cylindrical shells exposed to inevitable source-uncertainties. Euler-Lagrange equations are theoretically derived based on the three variable refined shear deformation theory. Closed-form solutions for the shell buckling loads are achieved by solving the deterministic eigenvalue problems. The analytical results are verified with numerical results obtained from finite element analyses that are conducted in the commercial software ABAQUS. The non-intrusive framework is completed by integrating the Monte Carlo simulation with the verified closed-form solutions. The convergence studies are performed to determine the effective pseudorandom draws of the simulation. The accuracy and efficiency of the framework are verified with statistical results that are obtained from the first and second-order perturbation techniques. Eleven cases of individual and compound uncertainties are investigated. Sensitivity analyses are conducted to figure out the five cases that have profound perturbative effects on the shell buckling loads. Complete probability distributions of the first three critical buckling loads are completely presented for each profound uncertainty case. The effects of the shell thickness, volume fraction index, and stochasticity degree on the shell buckling load under compound uncertainties are studied. There is a high probability that the shell has non-unique buckling modes in stochastic environments, which should be known for reliable analysis and design of engineering structures.

• The Korean Journal of Malacology
• /
• v.30 no.1
• /
• pp.33-40
• /
• 2014

The age and growth of Gomphina (Macridiscus) veneriformis sampled from February 2006 to January 2007 on the Wonsan coast of East Sea were determined from 3,899 shell. Age of Gomphina (Macridiscus) veneriformis was estimated from the ring on the surface of shell. The relationship between shell length (SL) and shell height (SH) was expressed by the following equation : SH = 0.7405 SL + 0.2227 ($R^2$ = 0.9671), and shell length (SL) and shell width (SW) was highly correlated by the equation : SW = 0.3657 SL + 0.4253 ($R^2$ = 0.922). The relationship between shell length (SL) and total weight (TW) was also expressed by the following equation : $TW=0.4274{\times}10^{-3}{\times}SL^{2.7876}$ ($R^2$ = 0.9591). The main spawning periods was estimated August through fatness index analysis. Based on the monthly variations in the marginal index (MI) of the shell, it is assumed that the ring of this species was formed once a year during the period of July. Growth curves for shell length (SL) and total weight (TW) fitted to the von Bertalanffy's equation were expressed as follows : $$SL_t=70.80(1-e^{-0.217(t+0.367)})$$ $$TW_t=(1-e^{-0.217(t+0.367)})^{2.7876}$$

• The Korean Journal of Malacology
• /
• v.21 no.1
• /
• pp.57-64
• /
• 2005

Samples of Corbicula japonica Prime of Jujin estuary in Gochang were collected from July 2000 to September 2001. Age of C. japonica was determined from the rings on the shell. The relationship between shell length and ring radius in each ring group was expressed as a regression line. Therefore, there is a correspondence in each ring formation. Based on the monthly variation of the marginal index (MI') of the shell, it is assumed that the ring of this species was formed once a year during the period of February and March. The relationship between shell length (SL; mm) and total weight (TW; g) was expressed by the following equation: TW = 1.0942 ${\times}10^{-4}SL^{3.3217}$ ($r^2$ = 0.9905). Shell length (SL) and shell height (SH; mm) was highly correlated with shell height as the following equation: SH = 0.9174 SL - 0.9935 ($r^2$ = 0.9885). The shell length (SL) - shell width (SW) relation was also expressed by the following equation; SW = 0.5925 SL - 1.1706 ($r^2$ = 0.9726). Growth curves for shell length and total weight fitted to the von Bertalanffy's growth curve were expressed as: $$SL_t = 46.4861[1-e^{-0.3383(t+0.0958)}]$$, $$TW_t = 34.54[1-e^{-0.3383(t+0.0958)}]^3.3217$$.

• Korean Journal of Poultry Science
• /
• v.18 no.3
• /
• pp.197-208
• /
• 1991

This study was conducted to estimated the genetic and phenotypic correlations between economic traits and certain other traits in Korean Native Ogol fowl The data analysis were the record of 450 pullets bred from 150 dams and 20 sires of Korean Native Ogol fowl at Chungnam National University from June 18, 1987 to April 6, 1989. The results obtained are summarized as follows ： 1 The genetic correlation coefficients of the economic traits and body shape components were as follows ： between body weight and shank length, breast width. breast girth, tibia length were 0.210~0.788, 0.231~0.826, 0.610~0.995 and 0.096~0.503 between age at first egg and shank length, breast width, breast girth, tibia length were 0.555~0.626, 0.149~0.270, 0.370~0.445 and 0.014-0.124. between number of egg production and shank length, breast girth, tibia length were -0.446~-0.167, -0.162~-0.320, 0.076~0.336 and 0.203~0.312 ： between egg weight and shank length, breast width, breast girth, tibia length were 0.132~0.498, 0.236~0.410, 0.148~0.775 and -0.019~0.593, respectively. 2. The genetic correlation coefficients of the economic traits and egg components were as follows ： between body weight and albumen weight, yolk weight, shell weight were 0.083~0.591, 0 110~0.541 and 0.336~0.782 between age at the first egg and albumen weight, yolk weight, shell weight were 0.476-0.692, 0.265~0.631 and 0.420~0.519 between number of egg Production and albumen weight, yolk weight, shell weight were -0.578~-0.240, -0.255~-0.060, -0.477~-0.313. between egg weight and albumen weight, yolk weight, shell weight were 0.825~0.939, 0.382~0.564, 0.374~0.337, respectively. 3. The genetic correlation coefficients of the economic traits and egg qualifies were as follows ： between body weight and egg shape index, shell thickness, albumen height, Haugh units were 0.215~0.367, 0.248~0.650, 0.161~0.624, 0.157~0.449. between number of egg production and egg shape index, shell thickness, albumen height, Haugh units were -0.384~-0.207, -0.557~-0.306, -0.555~-0.198, -0.582~-0.074 between egg weight and egg shape index, shell thickness, albumen height, Haugh units were 0.276~0.697, 0.290~0.627, 0.238~0.538, -0.207-0.020, respectively. 4. The genetic correlation coefficients of egg compositions and egg qualities were as follows ： between albumen weight and egg shape index, shell thickness, albumen height and Haugh units were 0.110~0.584, -0.380~-0.002, 0.239~0.887 and -0.195~0.279 ： between yolk weight and egg shape index, shell thickness, albumen height and Haugh units were -0.204~0.160, 0.294~0.133, -0.049~0.133 and -0.196~-0 136 ： between shell weight and egg shape index, shell thickness, albumen height and Haugh units were 0.127~0.503, 0.127~0.476, 0.140~0.273 and -0.172~0.233, respectively.