• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권4호
• /
• pp.164-169
• /
• 2001

This paper deals with comparison of characteristics of continuous-sheet type low-Tc superconducting (LTS) power supply and discrete-sheet type LTS power supply. These characteristics have been analyzed through experiments. These power supplies consist of two exciters, a rotor, a stator, and a LTS load. A continuous-sheet type has a single continuous niobium (Nb) sheet attached to the inner surface of on the stator. In the case of discrete-sheet type, four separated Nb sheets are used. this experiment is using 1.81 mH LTS magnet load and maximum 30 A dc exciter current. A discrete-sheet type is expected to produce much better pumping rate than a continuous-sheet type. The experimental observations have been compared with the theoretical predictions. In this experiment, the maximum pumping-current has reached about 926 A.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.103-109
• /
• 2007

본 논문에서는 시스템 파라미터의 변동이나 모델의 불확실성 및 외부 외란 등에 강인한 외란 관측기에 기초로 한 강인 제어기의 설계를 제안한다. 제어기는 두 개 루프의 구조를 갖는 모델기반 보상기와 궤환 제어기 구조로 구성되어 있다. 내부 루프 보상기는 내외부의 외란을 제거하고, 외부 루프 궤환 제어기는 주어진 사양을 만족하도록 하는 역할을 수행한다. 결과적으로, 제안한 강인 제어기를 이용함으로써 외란에 대해 시스템을 안정화시킬 수 있으며, 제어 성능을 향상시킬 수 있음을 보인다.

• 디지털융복합연구
• /
• 제12권8호
• /
• pp.303-308
• /
• 2014

본 논문은 스마트폰의 후면에 페라이트 시트를 종류별, 패턴별, 두께별로 부착하여 NFC의 인식거리를 시뮬레이션을 통하여 최적의 페라이트 시트를 설계하였다. 패턴별 특징은 I-type보다는 Full- type의 통신거리가 1~2mm 정도 더 확장되었다. 적용한 페라이트 시트는 금속에 의한 NFC 안테나의 특성을 개선하는 효과를 확인하였으며, 패턴 C의 경우 투자율이 140, 두께가 0.1mm, Full-type 인 페라이트 시트를 적용하였을 때 NFC 통신거리가 일반 전자파 흡수제의 경우 45mm에서 59mm로 증대되었음을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.325-330
• /
• 2000

In general steel sheet pile use the containment system, vertical barrier systems for waste disposal and landfill purposes, roads in excavation which have a more permanent character or temporary structure. The sheet pile joints between section of the wall are sealed with a filter material arid the resistance to seepage is a function of the type of material employed. The aim of this paper is to review a characteristic of permeability for Z type sheet pile by field test in various condition.

• 대한수학회보
• /
• 제55권1호
• /
• pp.9-23
• /
• 2018

In this paper, inspired by the fractional Brownian sheet of Riemann-Liouville type, we introduce the operator fractional Brownian sheet of Riemman-Liouville type, and study some properties of it. We also present an approximation in law to it based on the martingale differences.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.210-218
• /
• 1999

Sheet deposition type rapid prototyping system have many advantages : high build speed, low operating cost, large part size, no phase change, no need for support generation, and forth. However, those sheet deposition type rapid prototyping system require an additional post processing to remove excessive material attached to the part. This post processing is time consuming and labor intensive. Moreover, it is difficult for those system to fabricate parts with hollow cores and internal cavities. A new sheet deposition type rapid prototyping system that minimizes the post processing is proposed. The proposed system automatically removes excessive material in a peeling-off process between two cutting processes. In this way, the proposed system can reduce the post-processing time and cost as well as the limitation of the feasible geometric shapes in the conventional sheet deposition system.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.31-34
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined to reduce springback and defects of bent parts. The specimen is composed of top and bottom layers and a middle layer with dimple type-inner-structure and each layer is bonded by resistance welding. This specimen with hollow type-inner-structure shows different bending characteristics from the conventional sandwich sheet metals with solid type-inner-structure. The experiments were conducted for two kinds of working conditions, that is, clearance and movement of first bent specimen for second bending. The deformed profile, bend angle and springback were investigated and compared and then the proper working conditions for L-bending of sandwich sheet metal were prosed.

• 한국분무공학회지
• /
• 제10권4호
• /
• pp.32-46
• /
• 2005

The breakup characteristics of liquid sheets formed by the impinging and swirl type injectors were studied as increasing the Weber number (or injection condition) and the ambient gas pressure to 4.0.MPa. In the case of impinging type injector. we compared the changes of breakup lengths between laminar and turbulent sheets. which are formed by the impingement of laminar and turbulent jets. respectively. The results showed that both sheets expand as increasing the injection velocity irrespective of the ambient gas density when the gas based Weber number is low. When the Weber number is high, however, the breakup of turbulent sheet depends on the hydraulic force of jets as well as the aerodynamic force of ambient gas which determines the breakup of laminar sheet. Using the experimental results. we could suggest empirical models on the breakup lengths of laminar and turbulent sheets. In the case of swirl type injector. as $We_l$, and ambient gas density increased, the disturbances on the annular liquid sheet surface were amplified by the increase of the aerodynamic forces. and thus the liquid sheet disintegrated near from the injector exit. Finally, the measured breakup length of swirl type injector according to the ambient gas density and $We_l$, was compared with the result by the linear instability theory. We found that the corrected breakup length relation derived from linear instability theory considering the attenuation of sheet thickness agrees well with our experimental results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.259-262
• /
• 2005

This paper deals with the shear strengthening effect of RC beams strengthened with carbon fiber sheets. Fifteen strengthened RC beams(including control beam) were experimentally evaluated to determine improvements in shear strength. The major parmeters of experiment variables are fiber sheet strengthening ratios and strengthening methods of fiber sheet(I-S, I-W, U-S, U-W type). Reinforced concrete beams strengthened with carbon fiber sheets were tested under the combined control of load. Considering strengthening ratios and strengthening methods of fiber sheet, shear capacity and failure mode of test specimens were evaluated. The results show that shear capacity of beams strengthened with fiber sheet is about $28.82\%$ in IS type, $20.49\%$ in IW type, $26.04\%$ in US type, $28.70\%$ in UW type higher than the strength of control beam.

• 수산해양기술연구
• /
• 제32권4호
• /
• pp.457-464
• /
• 1996

The vibration damping of various multilayer damping sheet with different constraining layer and viscoelastic layer were investigated by Rheovibron and vibration test. Damping increased as dynamic loss tangent increased. Constrained type damping sheet showed better damping than extensional type damping sheet. Aluminum foil attached asphalt impregnated paper pad showed best damping.