• 한국안광학회지
• /
• 제12권1호
• /
• pp.41-51
• /
• 2007

두께 및 폭이 균일하지 않고 경사진 한 끝이 고정된 단면이 직사각형인 안경테 다리의 자유단에 수직 힘이 작용하는 경우 탄성체 내 모든 점에서 변위 및 접선 기울기의 연속, 구부림 모멘트의 연속, 전단력의 연속 등 법칙에 근거하여 이러한 불균일 안경테 다리의 변위를 이론적으로 구하는 방정식(모델)을 수립하였다. 베타티탄테 다리의 변형에 대한 실제 측정값과 유도한 이론식에 의한 예측 계산 값을 통계적으로 비교한 결과 상관계수 0.992 및 카이검정 결과 p=0.999로 서로 잘 부합되는 것을 알 수 있었다. 따라서 유도한 모델에 의해 다리의 탄성율 및 두께 폭과 같은 형상 변화에 따른 다리의 변형과 작용하는 힘(압력)의 크기 및 변화가 예측 가능하다. 안경테 다리의 두께 변화에 따른 다리 변형을 모사(simulation)하였다.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.107-120
• /
• 1997

The purpose of this study is to develop composite structural system which is to have versatility in plan design and to improve economical efficieney, to maximise structural capacity than existing structural system. In this viewpoint, it was investigated to the properties of structural behaviors for i oint consisting of concrete filled steel square tube column and P.C reinforced concrete beam through a series of hysteretic behavior experiment. In the previous report, researched to the properties of joints with key parameters. such as Axial Force ratio and section types. From the based on previous results, this study investigated the properties of this joints with key parameters, such as strength of concrete, size of panel zone and Axial Force ratio. The obtained results are summarised as follows. (1) Investigating for the failure mode of the beam-to-column joint, the specimens of S,LL and LH series(except for L5H) presented flexural failure mode. (2) The initial stiffness of joint was increasd as the decrease of axial force ratio and increase of the concrete strength. (3) The rotation resisting capacity was effective as the increment of the concrete strength and decrement of the axial force ratio. (4) The emprical formula to predict the ultimate capacity of joint model to introduce decrease coefficient according to the axial force ratio to superimpose shearing strength of steel web(H section) and bending strength of reinforced concrete beam was expected.

• Structural Engineering and Mechanics
• /
• 제19권6호
• /
• pp.653-677
• /
• 2005

Concrete filled steel tubular columns (CFT) are widely used in civil engineering works, especially in large scale of works because of high strength, deformation, toughness and so on. On the other hand, as a kind of strengthening measure for seriously damaged reinforced concrete piers of viaduct in Hansin-Awaji earthquake of Japan in 1995, reinforced concrete piers were wrapped with steel plate. Then, a new kind of structure appeared, that is, reinforced concrete filled steel tubular column (RCFT). In this paper, compression test and bending-shearing test on RCFT are carried out. The main parameters of experiments are (1) strength of concrete, (2) steel tube with or without rib, (3) width-thickness ratio and (4) arrangement of reinforcing bars. According to the experimental results, the effect of parameters on mechanical characteristics of RCFT is analyzed clearly. At the same time, strength evaluation formula for RCFT column is proposed and tested by experimental results and existed recommendations (AIJ 1997). The strength calculated by the proposal formula is in good agreement with test result. As a result, the proposed evaluation formula can evaluate the strength of RCFT column properly.

• 소음진동
• /
• 제9권4호
• /
• pp.828-834
• /
• 1999

The paper describes the vibration and the stability of nonuniform tapered beams resting on two-layered elastic foundations. The two-layered elastic foundations are constructed by discributed Winkler springs and shearing layers as ofen used in oil models. Governing equations are derived from energy experssions using Hamilton's Principle. The associated eigenvalue problems are solved to obtain the free vibration frequencies or the buckling loads. Numerical results for the vibration and the stability of beams under an axial force are presented and compared with other available solutions. Finally, vibration frequencies and critical forces are investigated for various thickness ratios, shear foundation parameters, Winkler foundation parameters, and boundary conditions of tapered beams.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.17-28
• /
• 1997

이 연구에서는 화학액으로서 해안가에서 쉽게 영향 받는 염분을 사용하였다. 염분 용액으로 포화된 모래 벤토나이트 혼합토를 사용하여 압밀 비배수 삼축압축 시험을 실시하였다. 변형과 강도정수를 삼축압축시험을 통하여 구속응력과 염수의 농도 변화에 따라 구하였다. 실험 결과 영수로 포화된 흙과 벤토나이트의 점착력은 염수의 농도가 증가함에 따라 증가하며 내부마찰각은 변화가 없고 탄성계수는 증가하는 것으로 나타났다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.61-65
• /
• 2011

The capabilities of finite elements codes allow now accurate simulations of blanking processes when appropriate materials modelling are used. Over the last decade, numerous numerical studies have focused on the influence of process parameters such as punch-die clearance, tools geometry and friction on blanking force and blank profile. In this study, three dimensional finite element analysis is carried out to design a lead frame blanking die using LS-Dyna3D package. After design of the blanking die, an experiment is also carried out to investigate the characteristics of blanking for nickel alloy Alloy42, a kind of IC lead frame material. In this paper, it has been researched the investigation to examine the influence of process parameters such as clearance and air cylinder pressure on the accuracy of sheared plane. Through the experiment results, it is shown that the quality of sheared plane is less affected by clearance and air cylinder pressure.

• Computers and Concrete
• /
• 제11권3호
• /
• pp.253-270
• /
• 2013

The aim of the present paper is to show the application of optimization strategies for the cost of beams in reinforced concrete buildings and to propose pre-sizing parameters. In order for these goals to be met, an optimization software program was developed. The program combines the analysis of structures by the grid model, reinforced concrete sizing, and the simulated annealing optimization heuristic. Sizing is compliant with the NBR 6118 (2007) Brazilian standard, according to which flexural, shearing, torsion, and web reinforcements and serviceability limit states (deflection and crack width limitation) are checked. Besides the dimensions of the situations mentioned above, the influence the cost of each material (steel, concrete and formwork) has on the overall cost of structures was also determined.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.57-68
• /
• 1999

This paper summarizes the results of a study which uses the recently developed Optical Profile Microscopy technique (Dove and Frost, 1996) as the basis for investigating the role of geomembrane surface roughness on the shear mechanism of geomembrane/geotextile interfaces. The alternative roughness parameters which consider the direction of shearing are described. These directional parameters are compared with the existing roughness parameters, and the relationship between these directional and non-directional parameters are investigated. Then, the relationship between interface shear strength and surface roughness quantified at the interface is investigated. The results show that interface friction can be quantitatively related to the surface roughness of the geomembrane. The peak and residual interface strengths increase dramatically through the use of textured geomembranes as opposed to smooth geomembranes. For the smooth geomembranes, the sliding of the geotextile is the main shear mechanism. For the textured geomembranes, the peak interface strength is mainly mobilized through the micro-texture of the geomembrane, however, the residual interface strength is primarily attributed to macro scale surface roughness which pulls out and breaks the filaments from the geotextile. The results of this study can be extended to the other interfaces such as joints in rock mass, and also can be used to provide a quantitative framework that can lead to a significantly improved basis for the selection and design of geotextiles and geomembranes in direct contact.

• Coupled systems mechanics
• /
• 제4권4호
• /
• pp.337-364
• /
• 2015

In this paper we present methodology for parameters identification of constitutive model which is able to present behavior of a connection between two members in a structure. Such a constitutive model for frame connections can be cast in the most general form of the Timoshenko beam, which can present three failure modes. The first failure mode pertains to the bending in connection, which is defined as coupled plasticity-damage model with nonlinear softening. The second failure mode is seeking to capture the shearing of connection, which is defined as plasticity with linear hardening and nonlinear softening. The third failure mode pertains to the diffuse failure in the members; excluding it leads to linear elastic constitutive law. Theoretical formulation of this Timoshenko beam model and its finite element implementation are presented in the second section. The parameter identification procedure that will allow us to define eighteen unknown parameters is given in Section 3. The proposed methodology splits identification in three phases, with all details presented in Section 4 through three different examples. We also present the real experimental results. The conclusions are stated in the last section of the paper.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.693-701
• /
• 2020

The conventional Kalman Filter (KF) provides a promising way for structural state estimation. However, the physical parameters of structural systems or models should be available for the estimation. Moreover, it is not applicable when the loadings applied to the structures are unknown. To circumvent the aforementioned limitations, a two-stage KF with unknown input approach is proposed for the simultaneous identification of structural parameters and unknown loadings. In stage 1, a modified observation equation is employed. The structural state vector is estimated by KF on the basis of structural parameters identified at the previous time-step. Then, the unknown input is identified by Least Squares Estimation (LSE). In stage 2, based on the concept of sensitivity matrix, the structural parameters are updated at the current time-step by using the estimated structural states obtained from stage 1. The effectiveness of the proposed approach is numerically validated via a five-story shearing model under random and earthquake excitations. Shaking table tests on a five-story structure are also employed to demonstrate the performance of the proposed approach. It is demonstrated from numerical and experimental results that the proposed approach can be used for the identification of parameters of structure and the external force applied to it with acceptable accuracy.