• 한국재난정보학회 논문집
• /
• 제16권4호
• /
• pp.796-805
• /
• 2020

연구목적: I형 강거더의 압축플랜지에 80MPa급의 고강도 콘크리트가 합성된 거더의 극한휨강도 평가를 위하여 정적재하시험을 수행하였다. 연구방법: 본 실험은 전단연결 상세가 다른 2종류의 실험체를 설계 및 제작하여 극한한계상태 도달까지 극한휨거동을 평가하였다. 또 실험 결과와 변형률적합법 결과 비교를 통해 극한강도를 평가하였다. 연구결과: 상대슬립 측정 결과 0.02mm 이내 변위를 확인함으로서 두 실험체가 완전결합을 담보한다는 것을 검증하였다. 따라서 전단상세의 차이는 강성에 큰 영향을 미치지 않으며 완전합성 된다면 극한한계상태까지의 거동에도 차이가 없다. 결론:실험 대상이 되는 거더는 사용하중이 탄성범위 내 있고, 허용처짐에 대한 사용성 요구조건을 충족시킨다. 따라서 케이싱 일부가 균열이 발생하는 수준의 인장력을 받더라도 철근의 역할로 인해 바닥판이 압축 파괴에 먼저 도달한다.

• 한국지구과학회지
• /
• 제31권5호
• /
• pp.454-464
• /
• 2010

A probability prediction model for tropical cyclone (TC) genesis in the Northwestern Pacific area was developed using the logistic regression method. Total five predictors were used in this model: the lower-level relative vorticity, vertical wind shear, mid-level relative humidity, upper-level equivalent potential temperature, and sea surface temperature (SST). The values for four predictors except for SST were obtained from difference of spatial-averaged value between May and January, and the time average of Ni$\tilde{n}$o-3.4 index from February to April was used to see the SST effect. As a result of prediction for the TC genesis frequency from June to December during 1951 to 2007, the model was capable of predicting that 21 (22) years had higher (lower) frequency than the normal year. The analysis of real data indicated that the number of year with the higher (lower) frequency of TC genesis was 28 (29). The overall predictability was about 75%, and the model reliability was also verified statistically through the cross validation analysis method.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.209-217
• /
• 2013

In order to verify the reliability of numerical site response analysis program, both soil free-field and base rock input motions should be provided. Beside the field earthquake motion records, the most effective testing method for obtaining the above motions is the dynamic geotechnical centrifuge test. However, need is to verify if the motion recorded at the base of the soil model container in the centrifuge facility is the true base rock input motion or not. In this paper, the appropriate input motion measurement method for the verification of seismic response analysis is examined by dynamic geotechnical centrifuge test and using three-dimensional finite difference analysis results. From the results, it appears that the ESB (equivalent shear beam) model container distorts downward the propagating wave with larger magnitude of centrifugal acceleration and base rock input motion. Thus, the distortion makes the measurement of the base rock outcrop motion difficult which is essential for extracting the base rock incident motion. However, the base rock outcrop motion generated by using deconvolution method is free from the distortion effect of centrifugal acceleration.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.82-86
• /
• 2005

Numerical methods to estimate behaviors of jointed rock mass can be roughly divided into two methods : continuous and discontinuous model. Generally, distinct element method(DEM) is applied in discontinuous model, and finite element method(FDM) or finite difference method(FDM) is utilized in continuum model. To predict a behavior of discontinuous model by DEM, it is essential to understand characteristics of joints developed in rock mass through field tests. However, results of field tests can not provide full information about rock mass because field tests are conducted in limited area. In this paper, discontinuous analysis by UDEC and continuous analysis by FLAC are utilized to estimate a behavior of a tunnel in jointed rock mass. For including discontinuous analysis in continuous analysis, joints in rock mass is considered by reducing rock mass properties obtained by RMR and decreasing shear strength of rock mass. By comparing and revising two analysis results, analysis results similar with practical behavior of a tunnel can be induced and appropriate support system is decided.

• Advances in nano research
• /
• 제10권2호
• /
• pp.175-189
• /
• 2021

In this article, frequency characteristics, and sensitivity analysis of a size-dependent laminated composite cylindrical nanoshell under bi-directional thermal loading using Nonlocal Strain-stress Gradient Theory (NSGT) are presented. The governing equations of the laminated composite cylindrical nanoshell in thermal environment are developed using Hamilton's principle. The thermodynamic equations of the laminated cylindrical nanoshell are obtained using First-order Shear Deformation Theory (FSDT) and Fourier-expansion based Generalized Differential Quadrature element Method (FGDQM) is implemented to solve these equations and obtain natural frequency and critical temperature of the presented model. The novelty of the current study is to consider the effects of bi-directional temperature loading and sensitivity parameter on the critical temperature and frequency characteristics of the laminated composite nanostructure. Apart from semi-numerical solution, a finite element model was presented using the finite element package to simulate the response of the laminated cylindrical shell. The results created from finite element simulation illustrates a close agreement with the semi-numerical method results. Finally, the influences of temperature difference, ply angle, length scale and nonlocal parameters on the critical temperature, sensitivity, and frequency of the laminated composite nanostructure are investigated, in details.

• 한국식품조리과학회지
• /
• 제16권4호
• /
• pp.367-371
• /
• 2000

육류연화를 위해 조리실무현장에서 자주 이용하는 과일인 배, 키위, 무화과, 파인애플, 파파야에 함유된 단백질 분해효소을 이용한 육류연화를 비교한 결과는 다음과 같다. 1, 양념장:물이 혼합비율이 2:1, pH 5.0∼5.5 부근의 산성일 때 최상의 연육 효과가 나타났다. 2. Rheometer를 이용하여 전단력 측정을 한 결과, pineapple>papaya> fig> kiwifruit > pear의 순으로 전단력 감소가 나타났으며, 이때 저작 5회째까지의 전단력 감소를 이용한 과일즙간의 연도에 미치는 영향을 비교한 결과, p<0.001 수준에서 파일애플, 파파야, 무화과는배나 키위에 비해 유의적으로 연도에 더 큰 영향을 주는 것을 관찰할 수 있었다. 3. 과일즙 첨가를 하여 조리한 육류에 대해 관능검사를 한 결과, p<0.01에서 연도와 전체적인 기호도에 있어 파인애플, 파파야 처리군과 배 처리군간에 유의적인 차이를 나타냈으며, p<0.05에서는 배와 파파야가 맛에 있어 유의적인 차이를 보였다. 4. 과일즙에 따른 관능과 기계적인 연도간의 상관성을 보면, 과일즙에 따른 기계적 연도와의상관성은 r=-.877로 가장 큰 상관성을 보였고(p<0.01), 연도가 높아짐에 따라 기호도도 상승하는 상관성(r=.532, p<0.01)이 있었다. 또한 과일즙에 따라 관능적 연도는 r=.495의 상관성을 보였고, 기계적 연도와 관능적 연도간에는 r=.490으로 상관성이 있음을 알 수 있었다. 한편 p<0.05 수준에서 맛과 다즙성 사이에 r=.208로서 상관도는 낮으나 유의적인 차이를 나타냈다. 즉 단백질 분해효소를 갖고 있는 과일즙 단백질 연화에 미치는 효과는 매우 크며 이들을 이용한 레시피 표준화는 앞으로 필요한 연구과제라고 사료된다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권1호
• /
• pp.37-50
• /
• 2016

A large eddy simulation (LES) of a turbulent channel flow is performed by using the third order low-storage Runge-Kutta method in time and second order finite difference formulation in space with staggered grid at a Reynolds number, $Re_{\tau}=590$ based on the channel half width, ${\delta}$ and wall shear velocity, $u_{\tau}$. To reduce the calculation cost of LES, algebraic wall model (AWM) is applied to approximate the near-wall region. The computation is performed in a domain of $2{\pi}{\delta}{\times}2{\delta}{\times}{\pi}{\delta}$ with $32{\times}20{\times}32$ grid points. Standard Smagorinsky model is used for subgrid-scale (SGS) modeling. Essential turbulence statistics of the flow field are computed and compared with Direct Numerical Simulation (DNS) data and LES data using no wall model. Agreements as well as discrepancies are discussed. The flow structures in the computed flow field have also been discussed and compared with LES data using no wall model.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.115-118
• /
• 1994

Three-dimensional steady and pulsatile flows in an end-to-side anastomosis were investigated using a finite difference method in order to understand the flow dynamics in the preferential development of distal anastomotic intimal hyperplasia or thrombosis. Steady flow results revealed that a double helical vortex was formed in the host artery and flow recirculations near tow and heel regions were limited due to the secondary flow. Oscillating wall shear stress with significant secondary flow might be the flow dynamic reason of developing intimal hyperplasia or thrombosis.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.85-91
• /
• 1996

An analysis for turbulent hybrid beatings with fluid inertia and swirl injection effect was derived for studying static characteristics of swirl-controlled hybrid journal. The swirl-controlled hybrid journal beating is considered to have more freedom in stability control in high speed rotating machinery. Current analysis is compared with experimental results with 3-recess hydrostatic journal bearing. The analysis revealed that the fluid momentum exchange at orifice discharge could produce pressure rise inside the recess region which can control the shear flow induced by journal rotation. The analysis also shows that the swirl-controlled hybrid journal beating has a capability of controlling load carrying capacity and stability by manipulating supply pressure and injection angle.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.84-89
• /
• 2003

The joint method and characteristics of lubricant Impregnated MC nylon and metal are analyzed. Considering the productivity and economics, two materials are Joined with the process of turning, knurling, and induction heating. The Joint strength is determined by adhesion of the melted nylon, the size of knurl, and the interference from the difference of the diameters. The parameters affecting induction heating process are analyzed. The adhesion strength of the melted nylon is measured. Finally the joint strength is analyzed in the environments of low, room, and high temperature. The nylon/metal Joined material is expected to be widely used as the sliding machine elements with good friction and shear strength.